MAINS SET 30 OVERSIZE 1275 A PLUS ONLY 3 SIDE TAG ...
AEM91886-30

($44.28) £44.28 exc vat

($53.14) £53.14 inc vat

In stockIn stock
Original equipment quality for factory built engines giving longer life expectancy on road cars under variable conditions of oil and use. These are the 1275cc mains as fitted to A Plus engines with the locating tab in the middle rather than to the ou...

($44.28) £44.28 exc vat

($53.14) £53.14 inc vat

In stockIn stock

Recommended usage 1 x AEM91886-30 to fit one mini.

People also bought products
MINI 1275 CAM LINER SET
MS3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

($15.75) £15.75 exc vat

($18.90) £18.90 inc vat
CRANK THRUST WASHER SET STANDARD 1275
ACL2136

SET OF STANDARD SIZE 1275 CRANK THRUST WASHERS

($11.25) £11.25 exc vat

($13.50) £13.50 inc vat
CAM LINER SET 1275
ACL3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all 1275cc blocks plus 970 and 1071 Cooper S. It's almost too simple and thus often overlooked during a rebuild. Camshaft bearings are pressed...

($15.75) £15.75 exc vat

($18.90) £18.90 inc vat
BIG ENDS PLUS 40 OVERSIZE 1275 EXCEPT COOPER S
AEB91306-40

Big end shell bearings for the 1275 larger 1.75" diameter rod pin-not Cooper S

( Tri-Metal )

Sintered copper lead, lead plated,steel backed

Nominal Composition

Copper 74%

Lead 24%

Tin ...

($30.00) £30.00 exc vat

($36.00) £36.00 inc vat
BIG ENDS PLUS 30 OVERSIZE 1275 EXCEPT COOPER S
AEB91306-30

Big end shell bearings for the 1275 larger 1.75" diameter rod pin-not Cooper S

( Tri-Metal )

Sintered copper lead, lead plated,steel backed

Nominal Composition

Copper 74%

Lead 24%

Tin ...

($30.00) £30.00 exc vat

($36.00) £36.00 inc vat
BIG END SET 20 OVERSIZE 1275 EXCEPT COOPER S
AEB91306-20

Big end shell bearings for the 1275 larger 1.75" diameter rod pin-not Cooper S

( Tri-Metal )

Sintered copper lead, lead plated,steel backed

Nominal Composition

Copper 74%

Lead 24%

Tin ...

($30.00) £30.00 exc vat

($36.00) £36.00 inc vat
CRANK THRUST WASHER SET 1275 3 THOU OVERSIZE
AEW2136-003

Set of +.003 thrust washers for 1275.

($7.60) £7.60 exc vat

($9.12) £9.12 inc vat
MAINS SET 20 OVERSIZE 1275 A PLUS ONLY 3 SIDE TAG ...
AEM91886-20

Original equipment quality for factory built engines giving longer life expectancy on road cars under variable conditions of oil and use. These are the 1275cc mains as fitted to A Plus engines with the locating tab in the middle rather than to the ou...

($32.00) £32.00 exc vat

($38.40) £38.40 inc vat
MAINS SET 30 OVERSIZE PRE A PLUS/EARLY A+ 1275
AEM91120-30

Main bearings, 1275 2" mains.30 thou oversize. Heavy duty steel backed bearing for durability and long life. The bearings to use if you want it to last. The only bearings to use

Sintered copper lead, lead plated,steel backed

Nomina...

($26.25) £26.25 exc vat

($31.50) £31.50 inc vat
BIG ENDS PLUS 10 OVERSIZE 998/1100 COOPER S
AEB572-10

Rod bearings, 850-1275 1 5/8" journals. Heavy duty steel backed bearing for durability and long life. The bearings to use if you want it to last. The only bearings to use on a fast road motor.

( Tri-Metal )

Sintered copper lead, le...

($31.20) £31.20 exc vat

($37.44) £37.44 inc vat
GEARBOX TO BLOCK STEPPED WASHER FOR CORNER BOLT
22A1150

($4.80) £4.80 exc vat

($5.76) £5.76 inc vat
PRE A+ TIMING GEAR FRONT PLATE (NON TENSIONER TYPE...
AEG161

Genuine Mini Spares engine front plate for pre A+ plus timing gear.



this fits engines using the early egg shaped cover



This plate has been modified by counter sinking the 2 main cap bolt holes to accept countersu...

($24.75) £24.75 exc vat

($29.70) £29.70 inc vat
SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +40
C-STN103-40

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading F1 German piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience. Glyn Swift was usi...

($299.00) £299.00 exc vat

($358.80) £358.80 inc vat
TIMING CHAIN SINGLE ROW SPECIAL QUALITY
3H2127EVO

Special superb extra strong timing chain with very limited stretch using modern day materials and technology to keep your timing correct and will fit any A series engine using a single row chain.

This chain saves all the time and effort requ...

($22.05) £22.05 exc vat

($26.46) £26.46 inc vat
RIGID ENGINE TO GEARBOX HALF MOON SEAL U
CAM6548

Originally developed by Rover to cut down on warranty hourly costs on powertrain warranty repairs, by their main dealers.-Labour time allowed at Rover dealers for fitting this seal was 3.4 hours labour rate.

This is a special rigid seal and ...

($4.00) £4.00 exc vat

($4.80) £4.80 inc vat
SIMPLEX TENSIONER 6 PIECE KIT
MSSK051

Parts required to stop timing chain rattle on A plus engine with single row chain.Last chance to buy the plate and pin to hold the tensioner as they are

obsolete from Rover.

It is worth the expence to fit MSSK051EVOkit...

($21.06) £21.06 exc vat

($25.27) £25.27 inc vat
PISTON SINGLE 1275 LOW DRAG +20 8.8CR
P21251-20

20 thou oversize low drag slipper type pistons for modern day compression ratios and unleaded fuel.

Typically installation will result in a minimum 8.8:1 compression ratio but on some pre 1984 Metro versions it was higher.

Current...

($48.00) £48.00 exc vat

($57.60) £57.60 inc vat
DUPLEX CHAIN AND GEAR SET LIGHTENED AE CAST .NOT F...
C-AJJ3324

Lightened cam gear duplex timing gear and chain set. Not recommended for race/rally applications. approx 69-70g 9% lighter

General: Camshaft Drive Systems


For highly tuned engines always use steel duplex as cast is nowhere as st...

($38.49) £38.49 exc vat

($46.19) £46.19 inc vat
BREATHER HOSE FROM BREATHER TO CARB
12A1735

Emission hose from carb to breather valve, this hose has special size ends and made of a material to cope with taking these emission gases.

Approx 23.75" long with internal 5/16" end and 1/2" other end.

GHC406 jubilee c...

($5.65) £5.65 exc vat

($6.78) £6.78 inc vat
TIMING COVER OIL SEAL ALL PRE 1992
88G561

Genuine Mini Spares Original black timing cover oil seal for all A series until the introduction of a new type of lip seal introduced in 1991 mainly for injection engines, when they changed to LUF10006--albeit many owners fit this not kn...

($1.80) £1.80 exc vat

($2.16) £2.16 inc vat