TWIN HS2 CARBURETTOR KIT - LESS A/C

Not built up-A matching pair of HS2 twin carbs with polished dashpot covers plus original type twin HS2 linkage kit, inlet manifold but less air cleaners etc.

The UNC bolt holding the abutment bracket on the inlet m...

($1,146.05) £1.146.05 exc vat

($1,375.26) £1.375.26 inc vat

TWIN HS2 CARBURETTOR KIT WITH S/STEEL HEATSHIELD

FZX3052A

Not built up-A matching pair of HS2 twin carbs with polished dashpot covers and stainless steel heatshields plus original type twin HS2 linkage kit, inlet manifold but less air cleaners etc.

The UNC bolt holding the...

($1,147.79) £1.147.79 exc vat

($1,377.35) £1.377.35 inc vat

TWIN HS2 CARBURETTOR KIT - LESS A/C

FZX3052

Not built up-A matching pair of HS2 twin carbs with polished dashpot covers plus original type twin HS2 linkage kit, inlet manifold but less air cleaners etc.

The UNC bolt holding the abutment bracket on the inlet m...

($1,146.05) £1.146.05 exc vat

($1,375.26) £1.375.26 inc vat

TWIN HS2 CARBURETTOR KIT WITH S/STEEL HEATSHIELD

FZX3052A

Not built up-A matching pair of HS2 twin carbs with polished dashpot covers and stainless steel heatshields plus original type twin HS2 linkage kit, inlet manifold but less air cleaners etc.

The UNC bolt holding the...

($1,147.79) £1.147.79 exc vat

($1,377.35) £1.377.35 inc vat

THROTTLE RETURN SPRING FOR TWIN CARBS

AEC2075

Throttle return springs for all twin carb variants. Usually 3 fitted.

($1.28) £1.28 exc vat

($1.54) £1.54 inc vat

HOSE CLIP 8-12MM

GHC108012

Small hose clip for 1/4" fuel line (our part number PETROLPIPE)

($1.16) £1.16 exc vat

($1.39) £1.39 inc vat

PETROL PIPE BRAIDED 5/16" BORE X 2.5"

21A2332

For 21A2331 pipe. Before the days of Aeroquip, Minis had braided petrol pipes. They should be used in place of rubber for all fuel lines where possible. This is 5/16" bore size for the joining pipe on twin tanks using the original pipe ...

($2.15) £2.15 exc vat

($2.58) £2.58 inc vat

T PIECE 5/16"

MTP002

Fuel or water T piece adaptor

used when upgrading fuel system size on specials from 1/4" to 5/16" or any other modifications

($4.28) £4.28 exc vat

($5.14) £5.14 inc vat

STUD HS4/HIF CARB + some 12G103 HOUSING (5/16")

CHS2514

Universal stud made for fitting the HS4/HIF carb to the manifold (except HS6 with alloy spacer on cast one piece manifold which requires CHS2515 (5.8mm longer)) and it also fits the cylinder head to take the thermostat housi...

($0.78) £0.78 exc vat

($0.94) £0.94 inc vat

22" BRAIDED PETROL PIPE 1/4" BORE

PPK7

Before the days of Aeroquip, Minis were fitted with braided steel rubber fuel lines. They should be used in place of rubber for all fuel lines in the engine compartment. They come made to length, with rubber end caps. 1/4" bore size.

This is...

($7.30) £7.30 exc vat

($8.76) £8.76 inc vat

HEAT SHIELD BLACK KIT TWIN HS2

MSSK008

Twin carb HS2 (1.25")black heatshields with link bar and 3 new return springs.

($26.47) £26.47 exc vat

($31.76) £31.76 inc vat

HS2 CARB DASHPOT COVER - BLUE

R22BLUE

brighten up your engine bay area with these bright alloy carb covers --these fit HS2 1.25" type carbs only- see R22 for chrome look and R22RED

($12.89) £12.89 exc vat

($15.47) £15.47 inc vat

HS2 CARB DASHPOT COVER - ALLOY

R22

Brighten up your engine bay with these bright alloy carb covers. These fit HS2 1.25" type carbs only- see R22BLUE and R22RED

($13.74) £13.74 exc vat

($16.49) £16.49 inc vat

ACCELERATOR CABLE NYLON SLEEVED EXTRA LONG

C-AHT85

Our heavy duty throttle cable is superior in many ways.

A nylon interior ensures smooth operation. The outer cable is 32mm longer and inner is 95mm longer than the standard one.

Cable to carb bolt is ACC5062.

($6.10) £6.10 exc vat

($7.32) £7.32 inc vat

WEBER LONG PAIR OF INLETS 8 PORT 90MM LONG

C-AHT507

A pair of fabricated steel inlets

these are the longer type for fitting weber carbs to the 8 port head but will require severe body modifications. they are however the answer to the best power available except injection. Please note these wi...

($445.83) £445.83 exc vat

($535.00) £535.00 inc vat

CARB DASHPOT OIL FOR SU RANGE

BDR125

Correct and original thickness oil for SU carb dashpots.

($7.43) £7.43 exc vat

($8.92) £8.92 inc vat

CARB SPRING (RED 4.5oz) HS TYPE CARBS

AUC4387

Standard spring for all HS2 and HS4 on minis except for the 997/998 Cooper from 1964-9 and H4 special tuning carbs which used AUC4587.

($7.59) £7.59 exc vat

($9.11) £9.11 inc vat

STUD FOR THERMOSTAT HOUSING WITHOUT SANDWICH PLATE...

CHS2515

Probably the most changed stud on the mini. This is the length used on every A series engine until the introduction of the sandwich plate when longer ones were required. A stainless steel variety C-STR286 is available which we do recomme...

($0.65) £0.65 exc vat

($0.78) £0.78 inc vat

CHOKE CABLE TRUNNION ACH9042 NIPPLE & 53K3503 SCRE...

AUE34

Complete with screw the choke trunnion is used on nearly all SU carb linkages.

See ACC5062 for carb cable link trunnion also.

($2.03) £2.03 exc vat

($2.44) £2.44 inc vat

TWIN CARB SPINDLE LEVER RH

AUE586

This is the right hand linkage lever taht sits on the rods between HS type twin carbs. Sold individually

($1.87) £1.87 exc vat

($2.24) £2.24 inc vat

NEEDLE BBC SWINGING TYPE

CUD1126

Swinging type needle useful for cams with 276 to 296 degrees duration with either standard or K&N filter.

($8.25) £8.25 exc vat

($9.90) £9.90 inc vat

GASKET 1.25" HS2 CARB (GUG705831GM)

1G2624B

Manifold to carb gasket for HS2 single and twin carbs, usually 3 per carb required.

($0.47) £0.47 exc vat

($0.56) £0.56 inc vat

CARB 5MM INSULATOR SPACER FOR 1.25" HS2 CARB

1G2623

The spacer block for between manifold and HS2 single carbs and use 1G2624 gaskets (3 of).

($13.74) £13.74 exc vat

($16.49) £16.49 inc vat

"T" PIECE 1/4" SU TWINS MTP001

12H889

Used in petrol fuel lines to take 1/4" petrol hoses it is used mainly on twin carb set ups for petrol being diverted to the 2 carbs.

($4.50) £4.50 exc vat

($5.40) £5.40 inc vat