LINKAGE KIT FOR MINISPARES WEBER INLET MANIFOLD

This is the kit supplied with our C-AHT772, C-AHT773 & C-AHT774 range of alloy inlet manifolds for the weber.

($33.18) £33.18 exc vat

($39.82) £39.82 inc vat

HIF44 CARB LINKAGE

LZX1739

($28.98) £28.98 exc vat

($34.78) £34.78 inc vat

SPI THROTTLE BODY SPACER BLOCK

LZV1101EVA

SPI throttle body spacer - the gaskets are available as LZV1101GASKET

($21.00) £21.00 exc vat

($25.20) £25.20 inc vat

ANCHOR TAG ON CARB

12A4

($0.66) £0.66 exc vat

($0.79) £0.79 inc vat

CARB HIF44 FULL REBUILD KIT EXCEPT TURBO

CRK167

complete overhaul kit for non turbo HIF44 carb includes needle valve and throttle shaft plus spindle--See CSK75 for service kit less spindle and disc

($97.68) £97.68 exc vat

($117.22) £117.22 inc vat

PETROL PIPE BRAIDED 5/16" BORE X 2.5"

21A2332

For 21A2331 pipe. Before the days of Aeroquip, Minis had braided petrol pipes. They should be used in place of rubber for all fuel lines where possible. This is 5/16" bore size for the joining pipe on twin tanks using the original pipe ...

($2.15) £2.15 exc vat

($2.58) £2.58 inc vat

CARB HIF38/44 ABUTMENT BRACKET

CAM4942

Metal bracket that fits between the manifold and the HIF44 (1.75")carb to hold the cable - the choke cable clip for this bracket is CZK6491. Also for HIF38. For HS4 carb see 12G766 bracket. Original Turbo type [...

($11.93) £11.93 exc vat

($14.32) £14.32 inc vat

T PIECE 5/16"

MTP002

Fuel or water T piece adaptor

used when upgrading fuel system size on specials from 1/4" to 5/16" or any other modifications

($4.28) £4.28 exc vat

($5.14) £5.14 inc vat

SPINDLE KIT HS6

WZX1178

Not fitted as standard to the A seriers it found its way on engines as a great tuning aid on tuned engines. this is the spindle only and the disc is WZX1321.We suggest you use a complete rebuild kit if this area has worn-CRK223 which will have to be ...

($13.50) £13.50 exc vat

($16.20) £16.20 inc vat

SPINDLE KIT HS4 1.5"

WZX1177

throttle spindle kit for single HS4 type carbs-.Quantity required-1 kit. -the butterfly is available seperately as WZX1323 for plain-WXZ1325 with air valve

($13.50) £13.50 exc vat

($16.20) £16.20 inc vat

22" BRAIDED PETROL PIPE 1/4" BORE

PPK7

Before the days of Aeroquip, Minis were fitted with braided steel rubber fuel lines. They should be used in place of rubber for all fuel lines in the engine compartment. They come made to length, with rubber end caps. 1/4" bore size.

This is...

($7.30) £7.30 exc vat

($8.76) £8.76 inc vat

15" BRAIDED PETROL PIPE 1/4" BORE

PPK6

Before the days of Aeroquip, Minis were fitted with braided steel rubber fuel lines. They should be used in place of rubber for all fuel lines in the engine compartment. They come made to length, with rubber end caps. 1/4" bore size.

Orange ...

($4.24) £4.24 exc vat

($5.09) £5.09 inc vat

FLOAT NEEDLE VALVE HS2/4/6 (VITON TIPPED)

WZX1100A

This is the original type of needle valve that governs the plastic fuel float in your SU carb.

An alternative better upgraded version is available as CA90.

($10.38) £10.38 exc vat

($12.46) £12.46 inc vat

ACCELERATOR CABLE NYLON SLEEVED EXTRA LONG

C-AHT85

Our heavy duty throttle cable is superior in many ways.

A nylon interior ensures smooth operation. The outer cable is 32mm longer and inner is 95mm longer than the standard one.

Cable to carb bolt is ACC5062.

($6.10) £6.10 exc vat

($7.32) £7.32 inc vat

10" BRAIDED PETROL PIPE 1/4" BORE

PPK4

Before the days of Aeroquip, Minis were fitted with braided steel rubber fuel lines. They should be used in place of rubber for all fuel lines in the engine compartment. They come made to length, with rubber end caps. 1/4" bore size.

Orang...

($4.00) £4.00 exc vat

($4.80) £4.80 inc vat

NEEDLE ADH SWINGING TYPE

NZX4008

Factory fitted HS4 with 850cc engine, wax stat.

($8.25) £8.25 exc vat

($9.90) £9.90 inc vat

FULL HS2 TWIN REBUILD KIT

CRK101

Master carb rebuild kit

Twin 1 1/4" SU carbs were stock on Cooper S and most Spridgets and are popular upgrades on many cars. The reason they are so popular is that the design is fantastic- but let's face it people; everything wears out and...

($126.03) £126.03 exc vat

($151.24) £151.24 inc vat

MANIFOLD ADAPTOR 1.75" (6.3mm) THICK WITH VACUUM T...

MFA446

Carb to manifold spacer with facility for fitting a vacuum gauge. This is suitable for HS6 and HIF44 and is 6.3mm thick.

($17.93) £17.93 exc vat

($21.52) £21.52 inc vat

MANIFOLD INLET WEBER 45 DCOE 3.5" MANIFLOW STEEL

C-AHT777

3.5" long steel intake manifold by Maniflow for Weber 45 DCOE/DHLA.

($170.13) £170.13 exc vat

($204.16) £204.16 inc vat

THROTTLE RETURN SPRING FOR TWIN CARBS

AEC2075

Throttle return springs for all twin carb variants. Usually 3 fitted.

($1.28) £1.28 exc vat

($1.54) £1.54 inc vat

STUD FOR THERMOSTAT HOUSING WITHOUT SANDWICH PLATE...

CHS2515

Probably the most changed stud on the mini. This is the length used on every A series engine until the introduction of the sandwich plate when longer ones were required. A stainless steel variety C-STR286 is available which we do recomme...

($0.65) £0.65 exc vat

($0.78) £0.78 inc vat