HANDBRAKE MOUNTING REAR BRACKET 1976 ONWARDS

Rear handbrake bracket. 1976 onwards for single cable lever. Welds to tunnel. Not included on CZH2669 floor. For forward bracket see CZH3214.

($10.44) £10.44 exc vat

($12.53) £12.53 inc vat

UNDER FLOOR WIRING PIPE CLIP TAG SHORT

CW100110

wiring tag short 25mm and 42mm overall

($1.34) £1.34 exc vat

($1.61) £1.61 inc vat

FRONT FLOOR PAN L/H PRESHAPED

MS25L

You can spend hours cutting out rust and patching holes, but why bother? These reproduction floor pans extend the full width with vertical flanges for easy installation and fairly well represent the original stamping. They have added metal to include...

($33.00) £33.00 exc vat

($39.60) £39.60 inc vat

FLOOR PAN RODCHANGE

CZH2669

Floor,Front and rear assembly for Rod change gear lever cars 1973 on less the crossmemeber. This floor is the latest shape ever made wich is stronger and has a gusset section down the L/H side to carry extra fuel lines. Also see HMP441004/5 floor sec...

($285.00) £285.00 exc vat

($342.00) £342.00 inc vat

CROSS MEMBER SQUARE TUNNEL FOR ROD CHANGE MINIS ON...

CZH2675

The crossmember holds the seat brackets and has the correct shape on the bottom to sit correctly on the floor of the rod change tunnel only. This is the complete section from inner sill one side to the other. Fits all square type rod change gearbox f...

($59.20) £59.20 exc vat

($71.04) £71.04 inc vat

FRONT FLOOR PAN R/H PRESHAPED

MS25R

You can spend hours cutting out rust and patching holes, but why bother? These reproduction floor pans extend the full width with vertical flanges for easy installation, and fairly well represent the original stamping. They have added metal to includ...

($33.00) £33.00 exc vat

($39.60) £39.60 inc vat

SLINGING BRACKET R/H REAR

24A42

Every mini saloon has these,2 of 24A41 on either side front and 24A42 /24A43 sided on the rear --only purpose was for building/moving/ storing and preparation of cars at the factory to sit them on ..Also acted as a stiffener...

($7.00) £7.00 exc vat

($8.40) £8.40 inc vat

SLINGING BRACKET FRONT

24A41

Every mini saloon has these,2 of 24A41 on either side front and 24A42 /24A43 sided on the rear --only purpose was for building/moving/ storing and preparation of cars at the factory to sit them on . Also acted as a stiffener...

($7.00) £7.00 exc vat

($8.40) £8.40 inc vat

SLINGING BRACKET L/H REAR

24A43

Every mini saloon has these,2 of 24A41 on either side front and 24A42 /24A43 sided on the rear --only purpose was for building/moving/ storing and preparation of cars at the factory to sit them on ..Also acted as a stiffener...

($7.00) £7.00 exc vat

($8.40) £8.40 inc vat

BOOT FLOOR PANEL REAR SECTION ONLY ABOUT 10" DEEP

MS54

This 9.5" rear section of the boot (trunk) floor is ideal for collision or rust repair. Many times if you are hit from the rear the floor right in front of the bumper gets damaged-this will fix it. If rust is your problem, then this along with a new ...

($32.00) £32.00 exc vat

($38.40) £38.40 inc vat

REAR ROOF CANTRAIL

14A6596

Rear cantrail.

($29.00) £29.00 exc vat

($34.80) £34.80 inc vat

DOOR BOTTOM REPAIR MK1 L/H

MSP002L

Repair section of bottom of door for external hinge cars, MK1/2.

This crude non genuine parts is the only repair section available for early doors apart from door skins.Lots of stretch marks and wrinkles but they have been fitted by customer...

($62.64) £62.64 exc vat

($75.17) £75.17 inc vat

DOOR BOTTOM REPAIR MK1 R/H

MSP002R

Repair section of bottom of R/H door for external hinge cars, MK1/2.

this crude non genuine parts is the only repair section available for early doors apart from door skins. Lots of stretch marks and wrinkles but they have been fitted by cus...

($62.64) £62.64 exc vat

($75.17) £75.17 inc vat

SUBFRAME MOUNT END PANEL VAN ONLY L/H

MS51VANL

Non genuine section repair panels equivalent to MS51VAN. This is the left hand side with castellated nut fittings for subframe

For vans with metal load floors and pickups so match up before cutting out to much material

($22.88) £22.88 exc vat

($27.46) £27.46 inc vat

SUBFRAME MOUNT END PANEL VAN ONLY R/H

MS51VANR

Non genuine section repair panels equivalent to MS51VAN. This is the right hand side with castellated nut fittings for subframe

For vans with metal load floors and pickups so match up before cutting out to much material

($22.88) £22.88 exc vat

($27.46) £27.46 inc vat

INNER WING PART PANEL L/H SPI 1991-96

CZH3067

part inner wing L/H from Damper bracket mounting pointing forward for SPI modles 1991-96 with large round electric radiatore fan hole

NON genuine panel

($52.20) £52.20 exc vat

($62.64) £62.64 inc vat

PANEL HINGE INNER L/H A PANEL EXTERNAL HINGE TYPE

14A8347GEN

Genuine version of 14A8347.

($75.00) £75.00 exc vat

($90.00) £90.00 inc vat

REAR PANEL LOWER REPAIR BELOW LIGHT L/H

MS028L

Non genuine repair panel for below the lights and above the rear valance, fits all models. Left hand side.

($10.50) £10.50 exc vat

($12.60) £12.60 inc vat

SEATBELT CENTRE MOUNTING PLATE ON REAR BULKHEAD

CZH2618

Seat belt mounting anchorage in the centre of the rear bulkhead.

($10.50) £10.50 exc vat

($12.60) £12.60 inc vat

L/H REAR VALANCE CLOSING PANEL AND SUBFRAME MOUNT ...

ALA8623MS

Non genuine rear valance closing panel with subframe mount repair

The rear valance of the Mini is a panel that is very often in need of replacing. While rear end damage can be a good reason, the most often cause is rust. The pane...

($22.50) £22.50 exc vat

($27.00) £27.00 inc vat