CROWNWHEEL + PINION 2.9 RATIO
CWP2-9

($157.50) £157.50 exc vat

($189.00) £189.00 inc vat

In stockIn stock
59 tooth crownwheel plus 20 tooth pinion making 2.95 ratio. A plus gears sold as a set only.

($157.50) £157.50 exc vat

($189.00) £189.00 inc vat

In stockIn stock

Recommended usage 1 x CWP2-9 to fit one mini.
Final drive ratios and Five Speed Gearbox - Qty 1

Alternative products
CROWNWHEEL + PINION 3.1 RATIO
CWP3-1

A plus crownwheel and pinion with 59 teeth and 19 teeth respectively=3.105

($157.50) £157.50 exc vat

($189.00) £189.00 inc vat
People also bought products
CROWNWHEEL/PINION 3.75 STRAIGHT CUT NOT LSD 16x60
C-BTA1002EVO

New Minispares Evolution straight cut crownwheel and pinion set 3.75. The crownwheel in these kits has a 20% wider gear than previously supplied, and a pinion made from Aero quality steel making it 20% tougher.16x60 teeth count.

THIS IS THE ...

($247.50) £247.50 exc vat

($297.00) £297.00 inc vat
CROWNWHEEL + PINION 3.1 RATIO
CWP3-1

A plus crownwheel and pinion with 59 teeth and 19 teeth respectively=3.105

($157.50) £157.50 exc vat

($189.00) £189.00 inc vat
CROWNWHEEL + PINION 2.76 RATIO GEARS
CWP2-76

Crownwheel with 58 teeth and pinion gear with 21 teeth. Not supplied with bearings.

($157.50) £157.50 exc vat

($189.00) £189.00 inc vat
DIFF PINION FOR 3.1 & 3.2 19teeth
DAM2808

19 tooth pinion for 3.1 and 3.2 final drives with 3 groove mark

list below for other markings

17 teeth central groove

18 teeth offset groove to one edge

19 teeth 3 groove markss

($67.50) £67.50 exc vat

($81.00) £81.00 inc vat
DRIVE FLANGE BOLT 12" WHEEL
BTA370

4 are required for the drive flange to 8.4" disc set ups and is also the same bolt for limited slip diff crownwheels. 3/8" UNF THREAD 11/16" long.

Sold singly

($1.50) £1.50 exc vat

($1.80) £1.80 inc vat
SWIFTUNE CLASSIC MINI QUAIFE ATB DIFFERENTIAL
C-AJJ3390

The Swiftune classic Mini Quaife ATB Automatic Torque Biasing differential offers the benefits of an LSD limited slip differential but saving you money on crownwheels and pinion plus output shafts!!

The Swiftune Quaife ATB avoids the need fo...

($679.00) £679.00 exc vat

($814.80) £814.80 inc vat
DIFFERENTIAL THRUST WASHER 8 THOU OVERSIZE
BTA102

Genuine Rover fibre type are now 48 thou thick which is so tight it will probably lock your diff up, they used to originally be .035 thou. These are 43 thou oversize type for worn units but the correct size of 35 thou is available as BTA101<...

($1.80) £1.80 exc vat

($2.16) £2.16 inc vat
LSD OUTPUT SHAFT RETAINING WASHER
C-BTA1243

Hardened flat washer to be used with flange type LSD Hardy Spicer C-BTA1262 outputs.

($2.24) £2.24 exc vat

($2.69) £2.69 inc vat
OUTPUT SHAFT FOR POT JOINT
DAM3114

Output drive shaft from the differential on Rod change type gearboxes,the teeth very rarely wear badly but the side cover bushes(2A3538)sometimes ruin the shaft causing those dreaded oil leaks from the seals in the output covers CHM85.

these...

($45.00) £45.00 exc vat

($54.00) £54.00 inc vat
DIFFERENTIAL ROLLER RHP manufacture
AHU1856

Genuine RHP as originally fitted to every production Mini.

Two of these main diff carrying bearings are required in the gearbox and this new steel caged type fits either way round. Should be pre loaded by 1-2 thou.

Some original fi...

($28.29) £28.29 exc vat

($33.95) £33.95 inc vat
BRONZE THRUST WASHER FOR PLANET WHEEL PRE A+
2A7062

The bronze washer for the planet gears in the differential for pre A plus gearbxes. You can use the DAM5071 and cut the lips off.

($2.22) £2.22 exc vat

($2.66) £2.66 inc vat
DIFF COVER WHEN USING HARDY SPICERS "S" AND ROD CH...
22G420

These are the larger bore diff side covers when hardy spicers are fitted and they also have the flange to cover detent spring on side if fitted to rod change when converted to hardy spicer. Has a 50mm oil seal o/d and bush size 34.8mm.For the yoke o...

($52.50) £52.50 exc vat

($63.00) £63.00 inc vat
OUTPUT SHAFT COLLETT
88G493

Only fitted to vehicles with hardy spicer output shafts (Cooper S and autos). Two collets are fitted in the output shaft in the gearbox and located behind the rubber seal 22A1566

($5.75) £5.75 exc vat

($6.90) £6.90 inc vat
DIFF SIDE COVER PLATE BUSH "S" FOR 22G420
22G421

A bronze type bush that fits in the gearbox output shaft side cover on early automatics and Cooper S with hardy spicer type joints. These are larger than the standard mini or rod change engine gearbox types which take 2A3538.

($10.00) £10.00 exc vat

($12.00) £12.00 inc vat
MINISPARES MOLYBDENUM CROSS PIN DIFF
C-AJJ3385

This is the original Evolution"Cross-pin" differential for the Mini.

Produced and sold by Mini Spares since 1994. It is a super heavy duty differential designed as a significant upgrade for reliability and strength to the standard units. Ove...

($231.00) £231.00 exc vat

($277.20) £277.20 inc vat
DIFFERENTIAL PIN AND BUSHED PLANET WHEEL DIFF KIT
C-BTA167

On certain motorsport events which include vigorous stopping and starting it is possible that the diff pin will wear badly or even break,this is due to the uneven load applied by the varying tolerances and poor machining of the planet gears.This kit ...

($62.72) £62.72 exc vat

($75.26) £75.26 inc vat
PLANET GEAR IN DIFFERENTIAL
DAM6624

Planet gears for the differential are now manufactured by us as the genuine Rover product is obsolete. Beware of others on the market which must be checked before fitting as the overall dimensions in height seem to vary along with inferior/wrong mate...

($11.00) £11.00 exc vat

($13.20) £13.20 inc vat
DIFF SHIM 6 THOU
DAM3108

You will need to shim up your diff bearings with these washers as required. See workshop manuals for details. See also DAM3109 & DAM3633.

($0.79) £0.79 exc vat

($0.95) £0.95 inc vat
DIFF SIDE COVER PLATE BUSH STD MINI
2A3538

The gearbox diff side plate bonze colour bush for all except auto and cooper S with hardy spicer output shafts. Sold singly 2 required per gearbox.

clearance needs to be 0.03mm

($2.70) £2.70 exc vat

($3.24) £3.24 inc vat
CROWNWHEEL BOLT
ATA7043

This is an aftermarket high tensile shouldered bolt that engine and gearbox tuners are using, as the original shape head and high tensile type bolt is no longer available. For holding the crown wheel to the differential housing.

Sold individ...

($2.85) £2.85 exc vat

($3.42) £3.42 inc vat