FAN BELT GROOVED TWIN POINT INJECTION. 1996 ON
GMB50920

($17.70) £17.70 exc vat

($21.24) £21.24 inc vat

In stockIn stock
Latest type grooved fan belt that fits special grooved pulleys on twin point cars only for better life expectancy. See kits C-AEA538 and C-AEA538A to convert earlier cars to this sort of set up.

($17.70) £17.70 exc vat

($21.24) £21.24 inc vat

In stockIn stock

Recommended usage 1 x GMB50920 to fit one mini.
Water Pump and thermostat from V134455 1275 MPI 96 - Qty 1
Alternators and Starter - Qty 1

People also bought products
2° OFFSET WOODRUFF KEY
WKN2OSET

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

($10.50) £10.50 exc vat

($12.60) £12.60 inc vat
CAMSHAFT WOODRUFF KEY
WKN505

woodruff key to fit in the camshaft to hold the larger timing chain gear. See 6K836 for the crankshaft keyway for the lower smaller timing chain gear

($0.68) £0.68 exc vat

($0.82) £0.82 inc vat
FAN BELT ALTERNATOR when CAM6408 pulley and altern...
GCB10838

Fit minis with latest A plus water pump pulley 4.75"wide CAM6408 and an alternator. Mainly used on 998cc. This belt is slightly longer than GCB10825 so always keep a spare so you know which size belt fitted your car best. La...

($5.79) £5.79 exc vat

($6.95) £6.95 inc vat
CRANKSHAFT WOODRUFF KEY
6K836

Woodruff key for the end of the crankshaft to locate the lower timing chain gear and WKN505 is for the camshaft key to hold the larger timing gear.

($4.98) £4.98 exc vat

($5.98) £5.98 inc vat
FANBELT ALTERNATOR TYPE
GCB10737

Used on some special and racers without charging system this belt is 737 mm long

($4.00) £4.00 exc vat

($4.80) £4.80 inc vat
TOOTHED BELT ON C-AEG455/C-AEA477/8
C-BELT255

tooth belt drive fan belt

this is for the tooth belt drive crank pulley to the 28 tooth water pump pulley

($9.30) £9.30 exc vat

($11.16) £11.16 inc vat
DUPLEX CHAIN AND GEAR SET LIGHTENED AE CAST .NOT F...
C-AJJ3324

Lightened cam gear duplex timing gear and chain set. Not recommended for race/rally applications. approx 69-70g 9% lighter

General: Camshaft Drive Systems


For highly tuned engines always use steel duplex as cast is nowhere as st...

($38.49) £38.49 exc vat

($46.19) £46.19 inc vat
CRANK PULLEY DAMPER ONLY "S" (MUST BE BALANCED TO ...
12A367

For high performance engines an efficient crank damper is a necessity to reduce failure. The standard damper commonly used is barely adequate for the standard engine. Mini Spares has reproduced the original "S" damper and pulley-far superior to the s...

($67.50) £67.50 exc vat

($81.00) £81.00 inc vat
BELT KIT OIL SMALL SEAL - PLASTIC BELTDRIVE ONLY
BELTSEAL3

This thinner crankshaft oil seal was used on the later belt drive kits with a plastic cover and larger diameter crank gear

($1.10) £1.10 exc vat

($1.32) £1.32 inc vat
TOOTHED BELT ON C-AEG455/C-AEA476
C-BELT270

tooth type fan belt for special cooling/charging system

This is for the tooth belt crank pulley and the large 38 tooth water pump pulley.

($9.54) £9.54 exc vat

($11.45) £11.45 inc vat
TOOTHED BELT ON C-AEA479/80 ON 476
C-BELT225

special tooth drive belt for cooling/charging pulleys

this one fits the alternator pulley and the 38 tooth water pump pulley.

($10.20) £10.20 exc vat

($12.24) £12.24 inc vat
FAN BELT COGGED 1980on EXCEPT TWIN POINT
GCB10825

For minis with latest A plus water pump pulley CAM6408 (4.75" wide) and an alternator. This belt is slightly shorter than GCB10838 so always keep a spare so you know which size belt fitted your car best. This seemed to be fi...

($3.50) £3.50 exc vat

($4.20) £4.20 inc vat
DUPLEX TIMING GEAR KIT
C-AJJ3323

Standard cast duplex gear set from the original AE supplier. for road use only.

Found to be the best fitting in Mini Mag feature Autumn 2007.

Driving the cam and controlling the timing relationships between the cam and the crank i...

($31.74) £31.74 exc vat

($38.09) £38.09 inc vat
TOOTHED BELT FOR C-AEA479/80 ON 477/8
C-BELT210

special toothed belt for cooling belt drive kits

For alternator pulley to 28 tooth water pump pulley

($9.60) £9.60 exc vat

($11.52) £11.52 inc vat
DUPLEX VERNIER ADJUSTABLE STEEL GEAR SET
C-AJJ3327

Adjustable cam gear set with non stretch chain. Cam gear weighs 674g

Even a stock camshaft needs to be timed correctly. If you want to get the maximum benefit from a "hot" cam it is doubly important that the cam timing be correct. This adju...

($88.00) £88.00 exc vat

($105.60) £105.60 inc vat
CRANK PULLEY LOCK TAB
12A398

Keyed or cupped, either variety does the job. A plus engines use a TAM2020.

($0.70) £0.70 exc vat

($0.84) £0.84 inc vat
FANBELT DYNAMO & ALTERNATOR
GCB10813

Fitted to most cars pre 1980 with either dynamo or alternator, plus 998 from 1985 and 1275 from 1990 when smaller pulley CAM6239 was used, this was mainly on automatic cars.

CAM6239 pulley 3.875" wide and CAM6408 pu...

($3.65) £3.65 exc vat

($4.38) £4.38 inc vat
COUNTERSUNK SCREW FRONT PLATE FOR DUPLEX
AEA687

Countersunk screw for holding the front palte to the crankshaft bearing cap on cars fitted with duplex gears to give the clearance required. 2 required per car.

($0.45) £0.45 exc vat

($0.54) £0.54 inc vat
TIMING COVER AND FRONT PLATE FITTING KIT
MSSK063

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

($8.00) £8.00 exc vat

($9.60) £9.60 inc vat
PUROLATER FILTER BOWL TO HEAD SEAL
12A1591

This is the large seal for the early type oil filter assembly pre spin on type.

($3.00) £3.00 exc vat

($3.60) £3.60 inc vat