HEAVY DUTY REAR TOW HOOK
MSA4002

($28.50) £28.50 exc vat

($34.20) £34.20 inc vat

In stockIn stock
Introducing the Classic Mini CST Rear Tow Eye, a tough hook which is laser cut from 5mm thick 304 stainless steel and then coated with a slight chrome finish. This means it’s not only strong and durable but also sleek and precise.



...

($28.50) £28.50 exc vat

($34.20) £34.20 inc vat

In stockIn stock

Recommended usage x MSA4002 to fit one mini.

People also bought products
FRONT SUBFRAME BOLT FITTING KIT 1976 on
KGB10022FK

Complete set of bolts to mount the front subframe on all post 76 single bolt subframes less the large tower bolts and towing eye, enough fixings are supplied for those who wish not to use a towing eye.

($14.46) £14.46 exc vat

($17.35) £17.35 inc vat
REAR SUBFRAME COMPETITION POLY BUSH SET (4 SMALL)
C-STR638

The Mini's rear subframe is rubber mounted. Polyurethane (stiffer, much longer lasting) bushes are now available for the rear subframe trunions. Cars manufactured before 1976 can use the same bush (2A5818/POLY) at the front and rear of the subframe, ...

($11.88) £11.88 exc vat

($14.26) £14.26 inc vat
TOWING EYE HEAVY DUTY AS PER TWIN POINT CARS
KPU100160

Best to buy with 1 x PWZ207, 1 x GFK1115, 1 x GFK1126, 1 x GFK5195 to allow correct fitment. 3/8" bolt and washers except for PWZ207 which has 7/17" hole.

These are superior to...

($7.50) £7.50 exc vat

($9.00) £9.00 inc vat
BOOT HINGE FITTING KIT
8B12602FK

Boot hinge gaskets and fittings for original type hinges

($3.69) £3.69 exc vat

($4.43) £4.43 inc vat
BLACK DELUX MOULDED SILL TRIM
GZF108A

Fluted type equivalent of GZF105A. This is equivalent

design of CZH4316 which was fitted between mini special black arches. Sold per side.

($9.84) £9.84 exc vat

($11.81) £11.81 inc vat
BONNET LOCK PLATE STAINLESS STEEL
AAM1223SS

This is the guide plate for the bonnet locking pin, now in stainless steel.

($8.25) £8.25 exc vat

($9.90) £9.90 inc vat
BATTERY STRAP HOOK & BOLT
14A7880

Battery strap metal clip that is bolted to boot floor, now in stainless steel to help stop corrosion. Later cars had a captive nut in the boot floor, if you have an early car or the nut has corroded use GFK3212SS to secure the bolt.

($6.32) £6.32 exc vat

($7.58) £7.58 inc vat
BLANKING PLATE 1 HOLE ON BULKHEAD FOR HEATER HOSES
ALA6592

Blanking plate on bulkhead with one holes for 1/2" heater hose

ALA7530 with 2 holes

ALA6592 with one hole

ALA6593 blank

($6.00) £6.00 exc vat

($7.20) £7.20 inc vat
BLANKING PLATE FOR BULKHEAD WHEN NO HEATER HOSES
ALA6593

Blank plate on bulkhead with no holes for heater hoses

ALA7530 with 2 holes

ALA6592 with one hole

ALA6593 with no holes

($6.00) £6.00 exc vat

($7.20) £7.20 inc vat
BLANKING PLATE WITH 2 HOLES
ALA7530

Plate on bulkhead with 2 holes for heater hose-Minispares make 3 types

ALA7530 with holes

ALA6592 with one hole

ALA6593 blank

($6.00) £6.00 exc vat

($7.20) £7.20 inc vat
ROTO DIP PIERCING (IVA/APPENDIX K BULKHEAD REPAIR)
HMP441017

HMP441017 - panel that can be either welded or bolted into place on the bulkhead to replicate the original rotodip piercing.



Very handy for historic appendix k spec cars or owners with Weber air boxes worried about cur...

($35.00) £35.00 exc vat

($42.00) £42.00 inc vat
KEY BLANK FS MINI DOOR/BOOT KEY
17H2475

Blank Mini FS door key.

($1.50) £1.50 exc vat

($1.80) £1.80 inc vat
RUBBER SILL MOULDING FINISHER 1993-2000
DDJ10002MS

In 1993 the moulding between the wheel arches was changed from black plastic to rubber and was still used on twin point rubber arches. This is the Minispares version which is a slightly more rounded profile.

($5.60) £5.60 exc vat

($6.72) £6.72 inc vat
SEAT PIVOT BRACKET
24A1495

Bracket on the crossmember that holds the seat.

2 required per seat.

($8.40) £8.40 exc vat

($10.08) £10.08 inc vat
30M ROLL BLACK WINDSCREEN INSERT
PW5013

The black windsreen and backlight rubber fillet. Chrome is more popular however.

A single length for a single screen is 37H8052

($14.56) £14.56 exc vat

($17.47) £17.47 inc vat
BODY SEAL KIT MK3 SET OF GS118389/13463 RUBBERS
GS15398

MK3 body seal kit kit includes w/screen rubber CZH1719MS, rear screen rubber JRC2674, 2 chrome inserts 24A1466MS,2 EAM7724 rear opening window seals and 2 CGA2835MS door seals

($57.65) £57.65 exc vat

($69.18) £69.18 inc vat
SCREEN SEAL KIT CZH1719MS. JRC2674 & CHROME INSERT...
GS13463

Front and rear screen with chrome plastic insert.Saving nearly 15% on cost of individual partts

($23.00) £23.00 exc vat

($27.60) £27.60 inc vat
VAN REAR HINGE GASKET
ALA8465

Van, Clubman Estate, Traveller and Countryman rear door hinge gasket. (sold individually)

($0.80) £0.80 exc vat

($0.96) £0.96 inc vat
DOOR UPPER WINDOW GLASS SEAL R/H GENUINE MINISPARE...
PAM3076

Genuine MK3 wind-up window upper slide up and down felt lined channel that fits into the R/H upper door frame. Left (PAM3077) and right (PAM3076) look identical but are mirror images.

($12.54) £12.54 exc vat

($15.05) £15.05 inc vat
DOOR UPPER WINDOW GLASS SEAL L/H GENUINE MINISPARE...
PAM3077

Genuine MK3 wind-up window upper slide up and down felt lined channel that fits into the upper door frame. Left (PAM3077) and right (PAM3076) look identical but are mirror images.If you are looking for a cheaper budget version see PAM3077MS

...

($12.54) £12.54 exc vat

($15.05) £15.05 inc vat