MASTER CYLINDER PLATE GASKET EARLY TYPE
NAM9197

($1.65) £1.65 exc vat

($1.98) £1.98 inc vat

In stockIn stock
The gasket that sits under the plate which the brake and clutch master cylinders sit on and under the blanking plate on the opersit side. fits all cars

($1.65) £1.65 exc vat

($1.98) £1.98 inc vat

In stockIn stock

Recommended usage 1 x NAM9197 to fit one mini.
Clutch & Pedal Linkage - Qty 1
Brake/Clutch Pedals and Controls - Qty 1

Recommended products
CLUTCH MASTER CYLINDER GASKET
31G279

This gasket sits under the clutch master cylinder.

For brake master cylinders see 31G840.

($0.80) £0.80 exc vat

($0.96) £0.96 inc vat
BRAKE MASTER CYLINDER GASKET - DUAL MASTER CYLINDE...
31G840

Gasket used under the dual master cylinder brake master cylinder. For the earlier single line brake pipe system see 31G279.

($0.96) £0.96 exc vat

($1.15) £1.15 inc vat
People also bought products
BRASS 3/8 UNF MALE BRAKE UNION
HU1

($0.99) £0.99 exc vat

($1.19) £1.19 inc vat
BRAKE FRONT CROSS PIPE PRE BENT
21A42

Pre bent steel brake line from RH brake hose union to the LH brake hose.

($13.50) £13.50 exc vat

($16.20) £16.20 inc vat
BRAKE PIPE FRONT BRIDGE BETWEEN CYLINDERS LH
21A1207

Pre brent steel brake pipe between the two wheel cylinders on the front drum brakes, LH side.

($9.60) £9.60 exc vat

($11.52) £11.52 inc vat
BRAKE PIPE FRONT BRIDGE BETWEEN CYLINDERS RH
21A1206

Pre brent steel brake pipe between the two wheel cylinders on the front drum brakes, RH side.

($9.60) £9.60 exc vat

($11.52) £11.52 inc vat
CLAMP PLATE FOR SERVO BRAKE PIPES COOPER 'S' & EA...
2H400

Clamp plate to hold servo brake pipes. Two required. Fitted to Cooper S and early 1275 GT. 1963 TO 1974.

($2.50) £2.50 exc vat

($3.00) £3.00 inc vat
ALUMINIUM BRAKE DRUM NON SPACERED PAIR
MINIFIN

Non spacered die cast alloy brake drums. The alloy material has a finned design that dissipates heat quicker which in turn helps reduce brake fade. Sold as a pair of drums.

($69.60) £69.60 exc vat

($83.52) £83.52 inc vat
MINI MPI BLACK MOULDED CARPET ONE PIECE SET 1997-2...
CK906A

We are now able to offer the origianl style 1 piece moulded carpets as fitted to 1997-2000 cars, these come supplied with the underlay although it is available separately under part number CK907. You could fit this carpet to any rod change Mini with ...

($234.00) £234.00 exc vat

($280.80) £280.80 inc vat
AP BRAKING DOT4 BRAKE FLUID 500ML
SSB9424

($3.00) £3.00 exc vat

($3.60) £3.60 inc vat
SEAL KIT FOR COOPER S AND GT TANDEM FAILURE SWITCH
BAU1704A

Repair kit for 13H5905, RTC2525

($8.00) £8.00 exc vat

($9.60) £9.60 inc vat
WASHER FOR BRAKE SERVO NON RETURN VALVE
11D5070

Washer for 17H2646ORIGINAL brake servo non return valve

($0.70) £0.70 exc vat

($0.84) £0.84 inc vat
GENUINE AP LOCKHEED HANDBRAKE LEVER GAITOR
17H7612GENUINE

Rubber gaiter to keep debris from entering the drum via the backplate handbrake lever SMN10005. Sold singly per backplate, 2 required per car.

Genuine AP Lockheed rubber boot

($5.03) £5.03 exc vat

($6.04) £6.04 inc vat
BRAIDED 4 LINE BRAKE HOSE KIT VINTAGE BLACK
C-AJJ4026BLACK

Set of 4 hoses, 2 front and 2 rear.

Braided brake and clutch hoses have a PTFE inner which helps to eliminate the spongy pedal feel under arduous conditions, and give greater efficiency. The outer braided stainless steel cover e...

($55.32) £55.32 exc vat

($66.38) £66.38 inc vat
MILLERS RACING BRAKE FLUID 300 PLUS 500ml
MILLERS008

Extra high boiling point (above 310°C) brake fluid exceeding the requirements of SAE J1703, SAE J1704 and FMVSS 116 DOT 4 for use in competition braking systems.



Application



Use for racing and high performance br...

($15.26) £15.26 exc vat

($18.31) £18.31 inc vat
BLEED SCREW 7mm for rear wheel cylinders
513118MS

Bleed nipple for all rear wheel cylinders and is 7mm spanner size. Nearly all

current wheel cylinders are using 7.8mm rather than 6.2mm(1/4")spanner size but same 1/4"unf thread. See 660510 spanner for this size bleed nipple.

($2.03) £2.03 exc vat

($2.44) £2.44 inc vat
BRAKE MASTER CYLINDER TO SERVO BODY SEAL 89 ON
NAM8570

Seal for between the brake servo and master cylinder, fits all late 1988 onwards vehicles where the master cylinder was mounted directly to the servo unit.

($1.25) £1.25 exc vat

($1.50) £1.50 inc vat
BRAIDED HOSE KIT FOR MINI ERA TURBO
C-AJJ4026ERA

Set of 6 hoses, 4 front and 2 rear to fit the ERA turbo.

Braided brake and clutch hoses have a PTFE inner which helps to eliminate the spongy pedal feel under arduous conditions, and give greater efficiency. The outer braided st...

($129.06) £129.06 exc vat

($154.87) £154.87 inc vat
SERVO GROMMET / SEAL FOR VAC PIPE TO BODY CASING
NAM8569

Replacement rubber grommet for the servo vacuum hose for the 1992 onwards brake servo (GSM119)

($2.48) £2.48 exc vat

($2.98) £2.98 inc vat
SERVO NON RETURN VALVE MK1/2
17H2646ORIGINAL

Mk1/2 in-line brake servo valve for 21A1293 servo. It is essential if you do not have the correct U shape section formed in the servo hose to stop petrol contaminating your servo. Not supplied in any kit it is an important part. If you ...

($12.00) £12.00 exc vat

($14.40) £14.40 inc vat
BRAKE PIPE COPPER NICKEL WITH 2 10MM ENDS 22" LONG
HMK022

NICKEL copper easy bend brake pipe with 2 metric male unions. 22"long, for 1988 on master cylinder lower outlet to PDWA valve outlet nearest to wing-other pipe is HMK026-both for left or right hand drive.

These pipes are retail...

($9.89) £9.89 exc vat

($11.87) £11.87 inc vat
BRAKE PIPE KIT RIGHT HAND DRIVE CONVERSION FOR GMC...
BAU5654MS

We now supply 2 easy bend copper nickel pipes with the correct unions for when converting to the later type GMC227 front to rear split master cylinder.

($16.51) £16.51 exc vat

($19.81) £19.81 inc vat