DISTRIBUTOR 91-93 PRE INJ - ELECTRONIC
NJC10038

($89.95) £89.95 exc vat

($107.94) £107.94 inc vat

In stockIn stock
1275 cc 1992 on with HIF38 carb and open loop catalyst

($89.95) £89.95 exc vat

($107.94) £107.94 inc vat

In stockIn stock

Recommended usage 1 x NJC10038 to fit one mini.
Distributors - Qty 1

People also bought products
DISTRIBUTOR CAP RETAINING CLIP FOR 45D DIZZY'S
GDC136CLIP

Replacement distributor cap retaining clip for all 45D type distributors-sold per clip.

($2.50) £2.50 exc vat

($3.00) £3.00 inc vat
DISTRIBUTOR 65D 90-93 HIF44 CARB COOPER
AUU1536

Electronic Ignition distributor, fitted as standard to all 1300 Carb Cooper models. Also Metro 1275cc engine.

Replacement service items for this are:

Cap GDC156

Rotor arm GRA2143

Should be used with GC...

($80.50) £80.50 exc vat

($96.60) £96.60 inc vat
IGNITION MODULE FOR ELECTRONIC DISTRIBUTOR
NJC10001

Replacement Distributor ignition module fitted to all standard electronic ignition distributors (non injection) looking at the front of module, negative is on the left. positive on right and centre pin is not used.

($30.00) £30.00 exc vat

($36.00) £36.00 inc vat
DISTRIBUTOR CAP DUCELLIER MINI-METRO 998CC
GDC214

Originally a red cap but now supplied in black, it was only fitted to Ducellier type distributors which were fitted to Mini Metros plus a few 998cc minis.Contact set is GCS119 and the condenser is GSC2113. Rotor arm is [lin...

($7.54) £7.54 exc vat

($9.05) £9.05 inc vat
DISTRIBUTOR SHIELD COVER FOR ELECTRICS LATEST TYPE
BHM1675

The current genuine large plastic shield with all fittings required to cover the engine electrics.

Parts are available seperately:

The plastic clips are 13H6461.

Upper bracket is NJU10002 x 2 requ...

($29.79) £29.79 exc vat

($35.75) £35.75 inc vat
DISTRIBUTOR CLAMP FOR A PLUS DIZZY 85 ON
TAM1671

Prong type clamp that bolts to the block and retains the A plus distributor in place. The screw is TAM1706.

Pre A plus clamp is 501134

($6.00) £6.00 exc vat

($7.20) £7.20 inc vat
DISTRIBUTOR ALDON RED PRE A PLUS
ALDONR

This distributor is for Pre A Plus race or High performance engines and can be fitted with points or LU143A ignition pack can be fitted as an extra

($163.86) £163.86 exc vat

($196.63) £196.63 inc vat
PERFORMANCE 8mm PLUG LEAD SET RED
C-27H7779RED

Lots of things have been written about performance plug ignition wires but regardless of what you believe we all know that good wires are a must. This special competiton wires set from the Lucas factory has 8mm wire and the highest performance, no br...

($13.19) £13.19 exc vat

($15.83) £15.83 inc vat
COIL BRACKET 1969-95 LUCAS TYPE COILS STAINLESS ST...
12G2994SS

Stainless steel coil bracket for 1970-1996 cars.

($9.45) £9.45 exc vat

($11.34) £11.34 inc vat
COIL BRACKET 1969-95 LUCAS TYPE COILS
12G2994

Coil bracket fitted to end stud of cylinder head,clutch end for coil to mount on as fitted 1969-94-MK3 on. This has been made to the original specification with the welded lug nuts rather than the cheaper method of having just plain holes to take a b...

($8.48) £8.48 exc vat

($10.18) £10.18 inc vat
COIL ORIGINAL SPORTS GOLD PERFORMANCE TYPE
MSC105

Best on the market, sports coil-Not Lucas. A standard coil can only do so much, and when compression is raised (as in most high performance engines) or improper fuel mixtures occur something better is needed. This sports gold coil with proven origina...

($20.70) £20.70 exc vat

($24.84) £24.84 inc vat
DISTRIBUTOR VACUUM UNIT 64DM4 FOR 1275 CC WITH HIF...
RTC3993

Fits 64DM4 distributors fitted to 1992 to 1275CC cars with HIF38 carburettor.

See BAU5309 for HIF44 carburettor 1275 cars.

($17.00) £17.00 exc vat

($20.40) £20.40 inc vat
DISTRIBUTOR VACUUM UNIT FOR COOPER WITH HIF44 CARB
BAU5309

Fitted from 1990 to 1275CC Cooper with HIF44 carburettor.

See RTC3993 for HIF38 carburettor 1275 cars

($27.18) £27.18 exc vat

($32.62) £32.62 inc vat
ROTOR ARM FOR ELECTRONIC DIZZY 1990-96
GRA2143

Rotor arm for all A series electric distributors when points are not fitted, except for turbo. The distributor cap for this rotor arm is GDC156.

($1.80) £1.80 exc vat

($2.16) £2.16 inc vat
DISTRIBUTOR CAP ELECTRONIC IGNITION
GDC156

This was the first mini distributor cap to have screws hold the cap to the body from about 1990 on, when electonic ignition was introduced. Therefore there is no points or condenser but the rotor arm to use is GRA2143. Fits all 1992 onwa...

($5.45) £5.45 exc vat

($6.54) £6.54 inc vat
CONTACT POINTS FOR 45D 1974-80(RED PLASTIC)
GCS2118

These points were fitted from 1974-80 when the distributors became a 45D type,

the distributor cap shape changed also to GDC136 and likewise rotor arm GRA2114 and condenser GSC2109.

($2.90) £2.90 exc vat

($3.48) £3.48 inc vat
COIL FOR ELECTRONIC IGNITION - '89 ON
GCL143

This is the standard non ballast coil as used on the late Mini with factory electronic ignition for use with 65D distributor.0.9ohms.



GCL143 was the Genuine Rover part fitted part on 1275cc from 1990.

0.9ohms

GCL2...

($20.69) £20.69 exc vat

($24.83) £24.83 inc vat
IGNITION SWITCH DASH MOUNTED
13H337

MK1/2/EARLY MK3. 3 position spring loaded type. Comes with barrel.

For barrel only use part number 24G1345.

($8.56) £8.56 exc vat

($10.27) £10.27 inc vat
NGK SPARK PLUG 998/STD 1275
BP6ES

Slightly hotter running engine plug for A Plus 998 and all 1275cc standard engines. For engine running CR of 9.4 to 10:1

($2.20) £2.20 exc vat

($2.64) £2.64 inc vat
HT LEAD SET RED SILICONE FROM LUMINITION
HV22

100% silicon insulation, silicon coated suppressed conductor,braided glass reinforcement,increased working temperature 0f minus 50C to +300 degrees with improved resistance to damp and water, great fitting and spiral bound wire giving instant and gre...

($29.25) £29.25 exc vat

($35.10) £35.10 inc vat