DOOR PULL CABLE ALTERNATIVE TO GLZ119 FOR MK1/2
14A6889

(25,50 €) £25.50 exc vat

(30,60 €) £30.60 inc vat

In stockIn stock
Although most early cars with sliding windows have metal interior handles this is the original cable type. Originally deleted for the GLZ119 handle because of frequent breakage and safety reasons it has been made available again for the purists. Never fitted to the Mini Super 850cc. Sold singly per door.

Owners were often left with a broken cable in their hands and the door being blown open as far as the check strap would allow often catching passers by and cyclists,or other vehicles causing damage to all.

(25,50 €) £25.50 exc vat

(30,60 €) £30.60 inc vat

In stockIn stock

Recommended usage 2 x 14A6889 to fit one mini.
Front Door - Sliding window type - Qty 2
Front Door - Sliding window type - Qty 2

Alternative products

MK1/2 interior door handle with screw and washer.

This solid "spoon" handle is brittle and easily broken.

These are the original shape as sold under the Unipart label, not the later Rover bagged item which was a reproduction with d...

People also bought products

Plastic seal for the early MK1 metal window locks. 4 required per car.

Sliding window catches chrome type for classic Mini MK1 & MK2, Traveller, Van, Countryman, Riley Elf and Wolseley Hornet.



Classic Minis and Mini Coopers had chrome metal catches for the sliding windows and channels. Black and white...

High quality non genuine door check strap for MK3 cars with wind up window doors (use with retaining pin CLZ412). Beware there are cheap copies on the market that are poor quality and when fitted to our cars did not function correctly!

Complete fitting kit for the door check straps on all Minis fitted with external hinges.

Angled spacer washer for Mk1/2 external door hinge cars for the upper hinge

This screw can used to hold together the 2 halves of the disc shields on all

mini front discs. fits MK1/2 door escutcheons.

Use SE910161 and cut down to 3/8" long including head

PMZ306 was originally 3/8"long u...

Full Mk2 door handle set with 2 front door locking handles and boot handle with matching keys. Fitted from 1966 with the intoduction of the door safety escutcheon boss. This boss is available as 24A1834 and gasket 24A1835.

Regre...

Twin point injection cars had a split seal system door frame seal for the front doors,the lower acting as a shield cover for the trim, fitted from chassis no BD134455 ON

Some customers have replaced it by the one piece CGA2835MS<...

The rubber that sits in the frame to hold the windows on wind up window type doors. The frames are ALA5746/7 or see MSSK2105 also used on Clubman Estate and Traveller rear windows in the finger pull grips.

Sold individually.2 pe...

Lower internal door hinge for either side.

Fits all wind up window type doors from 1970 on.

Non genuine hinge for R/H upper on wind up window type doors with internal hinges from 1970on. See kit MSS017B for better price.

Genuine Mini Spares mouldings product as supplied to Rover.

These are the later door mouldings that prevent water running down the windows into the door causing rust and have the black platic ends fitted for later car safety regulations but ...

Sliding window type weatherstrip kit R/H

kit contains lower and upper sliding channels plus the vertical strip that attaches to the glass as a draught excluder plus the stainless steel window catch runner that the lower channel sits in,with ...

Sponge type seal on L/H A post of all minis with wind up window type doors to protect from water running down into body. A part you must keep your eye on to stop rust.

Sponge type seal on R/H A post of all minis with wind up window type doors to protect from water running down into body. A part you must keep your eye on to stop rust, if the sponge is gettig hard then replace it.

Genuine MK3 wind-up window upper slide up and down felt lined channel that fits into the R/H upper door frame. Left (PAM3077) and right (PAM3076) look identical but are mirror images.

Genuine MK3 wind-up window upper slide up and down felt lined channel that fits into the upper door frame. Left (PAM3077) and right (PAM3076) look identical but are mirror images.If you are looking for a cheaper budget version see PAM3077MS

...

Genuine Mini Spares mouldings product as supplied to Rover.

These fit on the inside of the door as a draft excluder for the window, on all wind up window cars from 1970 on.

Genuine Mini Spares mouldings product as supplied to Rover.

Pair of the later door outer mouldings plus ADH3809 clips to help prevent water running down the windows causing rust.

These have black plastic ends for car s...