STRAIGHT CUT 1st GEAR 29 TOOTH
C-22A1735

(54,35 €) £54.35 exc vat

(65,22 €) £65.22 inc vat

In stockIn stock
STRAIGHT CUT 1ST GEAR FOR 4 SYNC SPECIAL TUNING GEARSET.



See table of "Straight Cut Gear Kits" and their components

(54,35 €) £54.35 exc vat

(65,22 €) £65.22 inc vat

In stockIn stock

Recommended usage 1 x C-22A1735 to fit one mini.

Recommended products
NEEDLE ROLLER 1st GEAR ONLY
AAU1815

1ST Gear needle roller bearing, 4 Synchromesh only

SITS ON THE TOP HAT SLEEVE THAT LOCATES 1ST GEAR

(10,43 €) £10.43 exc vat

(12,52 €) £12.52 inc vat
BAULK RING NON GENUINE
22G2033MS

Budget priced baulk (synchro) ring has been the same since 1962, originally steel but then sintered. These rings slow down the gears to insure that they mesh without crashing. They have a machine surface on them that is the first thing to engage the ...

(6,00 €) £6.00 exc vat

(7,20 €) £7.20 inc vat
BAULK RING GENUINE ROVER USE 22G2033EVO
22G2033

Genunine Rover sintered baulk ring. Use our 22G2033EVO sintered baulk ring, which is the best quality standard baulk ring currently in the market place and as used in our 5 speed gearboxes.

Our 22G2033MS are also si...

(18,48 €) £18.48 exc vat

(22,18 €) £22.18 inc vat
COMPETITION STEEL BAULK RING
C-22A1741

Mini Spares Performance Baulk ring.

The standard sintered baulk (synchro) rings are not tough enough for the demands of performance useage, in many instances lasting only one race before failure or breakage. The main reason is the incompat...

(35,36 €) £35.36 exc vat

(42,43 €) £42.43 inc vat
People also bought products
GEAR STRAIGHT CUT A PLUS 1st MOTION SHAFT 19 teeth
C-22A1732A

STRAIGHT CUT FIRST MOTION GEAR FOR A+ GEARSET ORIGINAL ST RATIO

19 teeth



See table of "Straight Cut Gear Kits" and their components

(95,25 €) £95.25 exc vat

(114,30 €) £114.30 inc vat

STRAIGHT CUT 2nd GEAR 3 SYNCHRO 28 TEETH
C-22G1049

2nd GEAR FOR 3 SYNC STRAIGHT CUT MINI ONLY

(64,20 €) £64.20 exc vat

(77,04 €) £77.04 inc vat
STRAIGHT CUT 1st MOTION SHAFT 19 teeth
C-22A1732

STRAIGHT CUT FIRST MOTION GEAR FOR PRE A+ GEARSET

19 teeth



See table of "Straight Cut Gear Kits" and their components

(95,25 €) £95.25 exc vat

(114,30 €) £114.30 inc vat

GEAR REVERSE STRAIGHT CUT FOR ROD CHANGE ONLY
C-STR303

Straight cut reverse gear for rod change box. Has 16 and 18 teeth.



See table of "Straight Cut Gear Kits" and their components

(73,47 €) £73.47 exc vat

(88,16 €) £88.16 inc vat

STRAIGHT CUT 3RD GEAR 3 SYNC MINI ONLY 24 teeth
C-22G1050

24 tooth straight cut 3rd gear 3 synchromesh Mini only.Beware a company has produced a 25 tooth variety which is a dumb ratio

(64,20 €) £64.20 exc vat

(77,04 €) £77.04 inc vat
GEAR STRAIGHT CUT LAYGEAR 4 SYNCROMESH PRE A PLUS ...
C-22A1737

In 4 synchro gearbox it's a critical part of the close ratio gear set. Be sure to check your old one for wear on the inner surface of the layshaft bearings; it wears out far faster than the gear teeth! Pre A+. For A Plus see C-22A1737A 1...

(105,02 €) £105.02 exc vat

(126,02 €) £126.02 inc vat
GEAR STRAIGHT CUT 3RD 22 TOOTH
C-22A1733

STRAIGHT CUT 3RD GEAR FOR 4 SYNC SPECIAL TUNING GEARSET

If you are about to undertake a gearbox strip down and you are using an old Haynes manual beware. When locking the gearbox into 2 gears to undoe the large mainshaft and Ist motion nuts,...

(83,70 €) £83.70 exc vat

(100,44 €) £100.44 inc vat
GEAR STRAIGHT CUT LAYGEAR A PLUS 4 SYNCHRO ST RATI...
C-22A1737A

LAYGEAR STRIGHT CUT FOR A PLUS GEARBOX IN ORIGINAL ST RATIO

TOOTH COUNT 15-19-23-25---this takes 2-CHM141 bearins

See table of "Straight Cut Gear Kits" and their components

(105,02 €) £105.02 exc vat

(126,02 €) £126.02 inc vat

GEAR STRAIGHT CUT 1st MOTION SHAFT ST 3 SYNCRO
C-22G1048

1st motion (input) shaft for 3-sync straight cut/close ratio gearboxes.

22 teeth

(95,25 €) £95.25 exc vat

(114,30 €) £114.30 inc vat
IDLER GEAR A PLUS STRAIGHT CUT
C-STR30AEVO

S/C 30 tooth idler gear for A+ boxes using the 7/8" shaft.



Evolution Straight cut 23 tooth 1275 primary gear.



Ongoing development and investment of bringing parts up to date from yesturyear with current tec...

(75,28 €) £75.28 exc vat

(90,34 €) £90.34 inc vat
23 TOOTH STRAIGHT CUT PRIMARY GEAR
C-STR123EVO

Evolution Straight cut 23 tooth 1275 primary gear.



Ongoing development and investment of bringing parts up to date from yesturyear with current technology Mini Spares have introduced new EVO straight cut drop gears. With new 2 r...

(125,76 €) £125.76 exc vat

(150,91 €) £150.91 inc vat
FULLY FLOATING 998 PRIMARY GEAR CONVERSION BUSH
C-AEA3239

Fully floating primary gear bush to downsize from our 1275cc type to 998 size on our 1275 primary gears with circlip conversion only to fit small bore crankshafts. Mainly used for our straight cut primary gear with circlip to hold fully floating bush...

(17,28 €) £17.28 exc vat

(20,74 €) £20.74 inc vat
LAYSHAFT A PLUS PERFORMANCE
C-22A1739

Minispares were the first company to produce these layshafts for performance engine/gearboxes as the standard type would flex and resullt in the breakage of the bearings causing seizure. Produced in an upgraded material and heat treated to the correc...

(31,85 €) £31.85 exc vat

(38,22 €) £38.22 inc vat
LAYSHAFT 4 SYNC COMP HIGRADE ( PRE 3 STEP . PRE A ...
C-22A1738

Minispares were the first company to produce these layshafts for performance engine/gearboxes as the standard type would flex and result in the breakage of the bearings causing seizure. Produced in an upgraded material and heat treated to the correct...

(29,12 €) £29.12 exc vat

(34,94 €) £34.94 inc vat
IDLER GEAR A PLUS STRAIGHT CUT
C-STR30A

S/C 30 tooth idler gear for A+ boxes using the 7/8" shaft.





Achievable drop gear ratios when using our Evolution gears:



22 tooth primary - 30 tooth idler - 25 tooth input = 1.136-1


24...

(48,38 €) £48.38 exc vat

(58,06 €) £58.06 inc vat
OUTPUT SHAFT CIRCLIP FOR LSD HARDY SPICER SHAFT
CCN122

Special circlip to hold the hardy spicer output shaft into the LSD units

such as evolution and Salisbury.

(1,16 €) £1.16 exc vat

(1,39 €) £1.39 inc vat
GEAR EVOLUTION LAYGEAR A PLUS
C-STR294

laygear for our famous C-STN39 straight cut gear set.

teeth count as follows 15-19-23-25--beware same teeth count on laygears as original Special Tuning gears but different widths--for identification purposes this gear takes onl...

(142,40 €) £142.40 exc vat

(170,88 €) £170.88 inc vat
GEAR EVOLUTION 3rd.23 TOOTH STRAIGHT
C-STR292

23 tooth straight cut gear teeth 3rd gear for our famous Evolution gear kit C-STN39. Molybdenum coated to the highest spec avaialble on the bailk ring surface.

(79,04 €) £79.04 exc vat

(94,85 €) £94.85 inc vat
DIFF HOUSING LOCK TAB ROD CHANGE LH
42H500

Left hand differential lock tab as used on rod change boxes up until 1982 when they were not longer used. For R/H locktab see 22A962

(0,91 €) £0.91 exc vat

(1,09 €) £1.09 inc vat
DIFF HOUSING LOCK TAB ROD CHANGE RH
22A692

Right hand differential lock tab as used on rod change boxes up until 1982 when they were not longer used.

(1,35 €) £1.35 exc vat

(1,62 €) £1.62 inc vat