(41,11 €) £41.11 exc vat
(49,33 €) £49.33 inc vat
In stock
(41,11 €) £41.11 exc vat
(49,33 €) £49.33 inc vat
In stockRecommended usage 1 x SIB320 to fit one mini.
a lovely neat little pod for fixing mainly to top dashes and sometimes under dash depending on room for 52mm gauges.
60/60 reading ammeter gauge from Smiths with magnolia face
fits positivr or negative earth and 6 or 12 volt systems.0-60 grading for alternator use only
Battery voltmeter gauge prewarns you of any electrical or charging defects or low battery condition.
fits positivr or negative earth and 6 or 12 volt systems.0-60 grading for alternator use only
60/60 reading ammeter gauge from Smiths with magnolia face
Made by the original gauge maker for the mini this voltmeter has a BLACK face
with SMITHS stamped on it.52mm diameter.
Made by the original gauge maker for the mini this voltmeter has a magnolia face
with SMITHS stamped on it.
Combined water temperature and oil pressure gauge.
Water temprature includes calipllary tube and adaptor to fit into the cylinder head, oil pressure gauge doesn't include the capillary fittings. Not for MPI minis.
This unit fits directly on to the gearbox in place of the standard cable and produces a digital signal for use with any electronic speedometer requiring 12 or 5 volt square wave pulse such as our electronic speedo 13H4443. For pre 1980 s...
This is the bulb holder for the original Smiths auxillary gauges fitted to 3 clock centre dashboards i.e 13H4459 and 13H4460, will also fit the aftermarket Smiths gauges (SIB part numbers).
Smaller 52mm face and reading 0-80 x100---If you are serious about your driving then you want to understand how your engine is responding to your urges. Many types of tachs are available in the aftermarket but since we drive British it should say "S...
Complete binnacle set for centre speedo cars, kit includes 200 kph magnolia speedo, temperature gauge, oil pressure gauge, binnacle and chrome surround (incl clips).Mini Spares also have a short loom which converts 3 clock Nippon
Seiko gauge...
Complete binnacle set for centre speedo cars, kit includes 200 kph black speedo, temperature gauge, oil pressure gauge, binnacle and chrome surround (incl clips).Mini Spares also have a short loom which converts 3 clock Nippon
Seiko gauge cl...
Complete binnacle set for centre speedo cars, kit includes 130 mph black speedo, temperature gauge, oil pressure gauge, binnacle and chrome surround (incl clips). Mini Spares also have a short loom which converts 3 clock Nippon
Seiko gauge c...
Voltage stabiliser for clubman/2-3 clock side pod(smiths) up to 1988. Three terminals/br1303/20.
With this large diameter line to the oil pressure guage you can actually see minor fluctuations in the pressure at idle or when the relief valve bounces open and closed. Because the braided steel line is one piece from the block to the gauge there is...
Angled oil pipe adaptor for fitting in confined spaces to eradicate damage of oil pipe, requires an OA adaptor if being used with a oil pressure gauge/t-piece.
Oil pipe in plastic 5 feet long, if fitting to a Tim gauge you will require LMA017 adaptor for the gauge.
Not comppatable with the CAM6431 standard oli pressure block union, and OA shoudl be purchased to fit.
Oil gauge adaptor for fitting into engine block or T piece.
29" long for L/H/D cars from about 1988 on when Seiko nippon speedo gauges are fitted. earlier cars used a 33" cable GSD102 which had the grey end but are interchangable and cheaper.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.