TAPPET ADJUSTING SCREW - MINI
12A1215

£5.04 exc vat

£6.05 inc vat

In stockIn stock
All the "pressed" rockers (except 1275cc type) use this adjusting screw, sold seperately. The 7/16"AF size nut is 6K654. This fitted all early "A" series engines including Morris Minor A35, A40 Farina and Sprite.Sold singly 8 required per engine

£5.04 exc vat

£6.05 inc vat

In stockIn stock

Recommended usage 8 x 12A1215 to fit one mini.
Cylinder Head 850CC, 998CC & 1100CC Pre 'A' Plus - Qty 8
997CC & 998CC Cooper Cylinder Head - Qty 8

Recommended products
ADJUSTER NUT 7/16"FOR ROCKER SCREW (PRESSED ROCKER...
6K654

This is the nut for the early 12A1215 rocker adjusting screw with 7/16"af spanner size and Not a UNF thread. For the later 1/2" spanner size see AEG167 screw and NT605061 UNF nut.

Sold singly,8 required...

£1.10 exc vat

£1.32 inc vat
People also bought products
ROCKER COVER GASKET SILICONE 9 STUD HEAD
GUG705009EVO

Upgraded rocker cover gasket made in silicon, ideal for race cars etc where the rocker cover is removed on a regular basis. Mini Spares fitted one on their 1380cc engine road car in August 2014 with great results. Rarely you may require longer rocker...

£8.40 exc vat

£10.08 inc vat
CYLINDER HEAD ANCILLARY STUD AND NUT KIT PRE 1990
MSSK061

Complete stud, nut and washer kit for the cylinder head ancillaries. Kit contains parts to retain the following:

Inlet/Exhaust manifold to head, studs/nuts/washers

Thermostat housing (no sandwich plate) studs/nuts/washers

H...

£14.00 exc vat

£16.80 inc vat
THERMOSTAT HOUSING STAINLESS STEEL STUD AND NUT KI...
C-STR281

Minispares own stainless steel Thermostat housing stud kit for the single tier type thermostat housing.Quantity required one kit per car

£11.00 exc vat

£13.20 inc vat
THERMOSTAT HOUSING FITTING KIT (SINGLE TIER TYPE)
12G103FK

This thermostat housing fitting kit, suitable for all single tier thermostat housings. Comes with new studs, nuts, washers and Klinger thermostat housing gasket

£3.35 exc vat

£4.02 inc vat
850/998/1098 PEFORMANCE HEAD GASKET
C-AEA647

Black Fibre composite head gasket for performance use head, for all 850/998/1100 engines especially with large overbores up to 100 thou oversize.

2.8cc compressed volume. Latest type of gasket material used by many automotive producers, to...

£25.60 exc vat

£30.72 inc vat
VALVE STEM OIL SEAL AS USED ON MPI MODELS
LJQ101160

Genuine Mini Spares valve stem oil seal manufactured with original Dupont Viton, as fitted to the twin points engines, are the best material and seal you can use and although expensive are the best to date in stopping the engine smoking.

Man...

£1.20 exc vat

£1.44 inc vat
HEAD GASKET SET 850/997/998/1100 ALL SMALL BORE IN...
AJM1250

Minispares universal head kit includes a top quality GEG302 copper head gasket, valve cover gasket, manifold gasket, thermostat gasket,heater tap gasket,2x thermostat gasket 6x HS2 carb gaskets,3xHS4 carb gaskets,2x air clea...

£14.38 exc vat

£17.26 inc vat
INLET VALVE 1100/997 COOPER
AEA574

Inlet valve for 997/1098cc engines. (Look for head casting nos. 12g202 and 12g206) 1.15" diameter with the wide groove for use with early cotters.Use this valve for obsolete valve 12G209 same size 1.15" Diameter Intake valves as fitted on 12G206 he...

£4.70 exc vat

£5.64 inc vat
VALVE EXHAUST 12G295 HEAD LARGE COLLET
AEA400

Best quality 1" exhaust valve for small bore cylinder heads as fitted standard to 998 Cooper. Higher grade than AEA434. Has a large 8.65mm (.340") collet groove 2A11 cotters which are now available as 2A11EVO.

£3.80 exc vat

£4.56 inc vat
ROCKER SHAFT WASHER (10 THOU WIDE)
AEG169

Sold individually.

To help rocker pad to valve stem alignment and reduce friction, the standard springs can be replaced with solid spacers and correctb shim set. The spacers and shim kit are sold as C-AEG392.

£0.21 exc vat

£0.25 inc vat
VALVE SPRING TWIN SET STD USE
C-AEA525

160lbs on the nose at 400" for standard Cooper S or twin spring set ups. See C-AEA526 and C-AEA527 for later developed springs. These are ok for all standard uses but are improved and uprated over all original factory fitted...

£26.25 exc vat

£31.50 inc vat
THERMOSTAT HOUSING GASKET LATEST TYPE
GUG705558GM

Genuine version of the thermostat gasket for all A series. Black one side and red the other they are fitted black side to the head. Green to the thermostat.

We have no evidence as yet that they last longer but do look good.

See [lin...

£1.18 exc vat

£1.42 inc vat
ROCKER SHAFT WASHER 40 THOU WIDE
AEG168

Originally fitted to help rocker pad to valve stem alignment and reduce friction, the standard springs can also be replaced with solid spacers and these shims. The spacers including correct shim set are sold as a set C-AEG392[.

...

£0.23 exc vat

£0.28 inc vat
VALVE INLET 88G459 COLLET TYPE
CAM6391

Goes with 12A1987 ex valve and should use AEA311 valve springs. 27mm. Pre A Plus for 850/998 with 88G459 small cotter grooves. Supplied singly, 4 required per engine.

£7.00 exc vat

£8.40 inc vat
STAINLESS STEEL HEATER TAP STUD SET
C-STR285

replacements in stainless steel for the heater tap elbow on the cylinder head.

Quantity required one kit per car

£4.00 exc vat

£4.80 inc vat
MANIFOLD STUD FOR TWIN HS2 INLET
CHS2614

Originally quoted as the HS2 twin carb manifold stud it is one thread longer than CHS2613 which was for single HS2 and spin on oil filter head to the block. UNC course thread for manifold or block and UNF for th...

£1.83 exc vat

£2.20 inc vat
HEAD GASKET SET 850/997/998/1100 ALL SMALL BORE IN...
AJM1250MS

Minispares universal super value head kit includes a head gasket, valve cover gasket, manifold gasket, thermostat gasket, heater tap gasket, 2x thermostat gasket, 6x HS2 carb gaskets, 3x HS4 carb gaskets,2x air cleaner to ca...

£10.42 exc vat

£12.50 inc vat
ROCKER COVER CORK GASKET (EXCEPT 11 STUD HEADS)
GUG705009VC

Mini cork Rocker cover gasket, suitable for all Minis and A series engines except those with 11 stud heads (see part number GUG5038VC). A must have replacement item when adjusting rocker clearances. see GUGG705009EVO for sil...

£1.30 exc vat

£1.56 inc vat
ROCKER COVER CHROME FITTING NUT / ERA BUMP STOP NU...
GM038P

Chrome Rocker bolt with UNF thread. Original Rocker cover bolts are dull zinc coated or painted but the chrome type look much better and cheaper.

A longer threaded version CAM6823 was used on prestige Minifin alloy type A series...

£4.20 exc vat

£5.04 inc vat
BLANKING PLUG INLET MANIFOLD & CYL HEAD
ADP210

This 5/8unf steel hexagonal head blanking plug was made for the inlet manifolds where the servo union can be fitted, plus blanking off the thermal transmitter hole under the thermostat. Uses 1B3664 washer ----------please note this will ...

£3.57 exc vat

£4.28 inc vat