ROCKER LATE TYPE
CAM289

£9.00 exc vat

£10.80 inc vat

In stockIn stock
The only current production rocker from Rover is sintered and runs without a bush and was first used from 1974 on. A fairly inexpensive replacement. See AEG167 and NT605061 for the adjusting screw and nut.

£9.00 exc vat

£10.80 inc vat

In stockIn stock

Recommended usage 8 x CAM289 to fit one mini.
Cylinder Head 850CC, 998CC & 1100CC Pre 'A' Plus - Qty 8
Cylinder Head, 998CC, 'A' Plus 1980 on - Qty 8
1275 Except Cooper 'S' & Turbo - Qty 8
Cylinder Head 1275 Turbo & Heads with Triple Coll - Qty 8
Cylinder Head - Qty 8

Recommended products

The standard end washer for the rocker shaft but see AEG168 and AEG169 for spacer shims or complete kit C-AEG392

Genuine Mini Spares upgraded UK made EN8 screws, specially heat treated in correct places as per original drawings, sold individually without nuts.

Nuts are sold individually as NT605061.

Used on our 1.5 forged and roll...

The larger 5/16 unf size rocker screw as used on all forged, sintered and later pressed steel versions that use AEG167 screw in EN8 with heat treated ends. 1/2" wide AF spanner size head nut to fit AEG167

See [link]...

Alternative products

Hi-Lift forged rockers on our special rocker shaft with AEG167 adjuster screws for road or race.

Ensure posts are equally tightened down to eliminate stress fractures on shaft.

Using 1.5 ratio high lift rockers has alm...

Forged cast type rocker with original ratio of close to 1.3 with adjusting screw and 1/2" af nut. See AEG167, screw (regular) or AEG167EVO hexagon head); NT605061, nut - profile of pad reduces side loading on va...

People also bought products

Replacement Rocker arm adjusting screw as fitted to 1275 engines with sintered type rockers and for use on any 5/16 thread type.

Use better EN8 quality AEG167 or race type AEG167EVO.

Will fit the forged S r...

Sold individually.

To help rocker pad to valve stem alignment and reduce friction, the standard springs can be replaced with solid spacers and correctb shim set. The spacers and shim kit are sold as C-AEG392.

Originally fitted to help rocker pad to valve stem alignment and reduce friction, the standard springs can also be replaced with solid spacers and these shims. The spacers including correct shim set are sold as a set C-AEG392[.

...

Direct replacement rocker shaft. Fits all except full needle roller types. Far superior to the stock item! ENSURE YOU ALWAYS TIGHTEN DOWN ALL POSTS EQUALLY to eliminate stress fractures on shaft.



Our special "heavy duty" shaft has ...

Rocker shafts wear fairly quickly. The upside to this used to be that the rocker bushes lasted longer, but later sintered rockers run without bushes. It is easier and less expensive to replace the rocker shaft!

Fits all models but beware as ...

Genuine Mini Spares upgraded UK made EN8 screws, specially heat treated in correct places as per original drawings, sold individually without nuts.

Nuts are sold individually as NT605061.

Used on our 1.5 forged and roll...

This is the nut for the early 12A1215 rocker adjusting screw with 7/16"af spanner size and Not a UNF thread. For the later 1/2" spanner size see AEG167 screw and NT605061 UNF nut.

Sold singly,8 required...

Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket

This kit of head studs is the best available for road and lightly tuned engines. See the C-AHT280 set for highly tuned engines.

The material spec is alloy steel heat treated to 75 tensile tons per square foot minimum and finish...

New competition valve cotter, these are precision CNC machined from 4340 and heat treated to a better spec than EN24T and claimed to be stronger in fatigue life.

These locate better in the valves and easier to control spring heights.

Upgraded rocker cover gasket made in silicon, ideal for race cars etc where the rocker cover is removed on a regular basis. Mini Spares fitted one on their 1380cc engine road car in August 2014 with great results. Rarely you may require longer rocker...

Complete stud, nut and washer kit for the cylinder head ancillaries. Kit contains parts to retain the following:

Inlet/Exhaust manifold to head, studs/nuts/washers

Thermostat housing (no sandwich plate) studs/nuts/washers

H...

Minispares own stainless steel manifold stud and 6 sided hexagon nut kit.

For mutipopint nut kit see C-STR287

Quantity required one kit per car

This thermostat housing fitting kit, suitable for all single tier thermostat housings. Comes with new studs, nuts, washers and Klinger thermostat housing gasket

Black Fibre composite head gasket for performance use head, for all 850/998/1100 engines especially with large overbores up to 100 thou oversize.

2.8cc compressed volume. Latest type of gasket material used by many automotive producers, to...

Genuine Mini Spares valve stem oil seal manufactured with original Dupont Viton, as fitted to the twin points engines, are the best material and seal you can use and although expensive are the best to date in stopping the engine smoking.

Man...

1.2"(31mm) intake valve for 12G295 Cooper head 998cc. Also a suitable upgrade for other small bore heads. These have the large collet groove 8.65mm (.340") 2A11 cotters which are now available as 2A11EVO. Correct grade exhau...

Minispares universal head kit includes a top quality GEG302 copper head gasket, valve cover gasket, manifold gasket, thermostat gasket,heater tap gasket,2x thermostat gasket 6x HS2 carb gaskets,3xHS4 carb gaskets,2x air clea...

Contains following; TAM1521 head gasket, inlet/exhaust manifold gasket, rocker cover, heater valve, 2 x thermostat, 3 x HS4 carb to manifold, 6 x HS2 carb to manifold, 2 x HS2 carb to aircleaner, 3 ...

Best quality 1" exhaust valve for small bore cylinder heads as fitted standard to 998 Cooper. Higher grade than AEA434. Has a large 8.65mm (.340") collet groove 2A11 cotters which are now available as 2A11EVO.