STUD HS4/HIF CARB + some 12G103 HOUSING (5/16")
CHS2514

£0.78 exc vat

£0.94 inc vat

In stockIn stock
Universal stud made for fitting the HS4/HIF carb to the manifold (except HS6 with alloy spacer on cast one piece manifold which requires CHS2515 (5.8mm longer)) and it also fits the cylinder head to take the thermostat housing. Note that HS2 carbs require larger CHS2613/4 studs, 5/16" unc with unf thread for nut.

£0.78 exc vat

£0.94 inc vat

In stockIn stock

Recommended usage 3 x CHS2514 to fit one mini.
Gearbox Transmission - Qty 1
Inlet & Exhaust Manifolds - Qty 4
Inlet and Exhaust manifolds except Injection - Qty 2
Gearbox Transmission Case - Qty 1
Gearbox Transmission Case - Qty 2
Gearbox Transmission Case 2 - Qty 1

Recommended products
NUT PLAIN 5/16" UNF
GFK3212

Zinc plated 5/16" UNF plain nut

£0.09 exc vat

£0.11 inc vat
WASHER PLAIN 5/16"
GFK1114

5/16" flat plain washer.

£0.06 exc vat

£0.07 inc vat
SPRING WASHER 5/16"
GFK1125

£0.11 exc vat

£0.13 inc vat
Alternative products
STUD FOR THERMOSTAT HOUSING WITHOUT SANDWICH PLATE...
CHS2515

Probably the most changed stud on the mini. This is the length used on every A series engine until the introduction of the sandwich plate when longer ones were required. A stainless steel variety C-STR286 is available which we do recomme...

£0.65 exc vat

£0.78 inc vat
People also bought products
ROCKER ADJUSTING NUT EN24T
C-AHT450

Mini Spares genuine upgraded part. Hexagon head rocker screw nut in EN24T.

Also available is a flanged nut C-AHT449

£2.64 exc vat

£3.17 inc vat
HIF44 CARB LINKAGE
LZX1739

£28.98 exc vat

£34.78 inc vat
HEAD STUD AND NUT KIT WITH A+ FLANGED NUTS
C-AHT279A

This kit of head studs is the best available for road and lightly tuned engines. See the C-AHT280 set for highly tuned engines.

The material spec is alloy steel heat treated to 75 tensile tons per square foot minimum and finish...

£51.92 exc vat

£62.30 inc vat
ARP 11 STUD HEAD SET
C-AHT283

ARP Head stud kit that compromises of;

4 x Long Head Studs

7 x Short Head Studs (Disregard 2 if you're using a 9 stud application)

11 x Multipoint ARP nuts

11 x Heavy Duty Washers

4 x Rocker post studs <...

£142.50 exc vat

£171.00 inc vat
RETURN SPRING KIT FOR HS4
WZX1335

Return spring kit for HS4 carburettor spindle.

£7.65 exc vat

£9.18 inc vat
8 PORT HEAD STUD AND NUT SET (STUDS EN24 CHROME MO...
C-AHT282

EN24 Nickel Chrome moly steel studs,Competition head stud kit.

torque to 45ftlbs -no need to re-torque cometic type head gaskets.

For use on the 2012 onwards heads only.

£58.76 exc vat

£70.51 inc vat
CYLINDER HEAD ANCILLARY STUD AND NUT KIT PRE 1990
MSSK061

Complete stud, nut and washer kit for the cylinder head ancillaries. Kit contains parts to retain the following:

Inlet/Exhaust manifold to head, studs/nuts/washers

Thermostat housing (no sandwich plate) studs/nuts/washers

H...

£14.00 exc vat

£16.80 inc vat
MANIFOLD STAINLESS STEEL STUD AND NUT KIT
C-STR282

Minispares own stainless steel manifold stud and 6 sided hexagon nut kit.

For mutipopint nut kit see C-STR287

Quantity required one kit per car

£21.41 exc vat

£25.69 inc vat
THERMOSTAT HOUSING STAINLESS STEEL STUD AND NUT KI...
C-STR281

Minispares own stainless steel Thermostat housing stud kit for the single tier type thermostat housing.Quantity required one kit per car

£11.00 exc vat

£13.20 inc vat
THERMOSTAT HOUSING FITTING KIT (SINGLE TIER TYPE)
12G103FK

This thermostat housing fitting kit, suitable for all single tier thermostat housings. Comes with new studs, nuts, washers and Klinger thermostat housing gasket

£3.35 exc vat

£4.02 inc vat
ANCHOR TAG ON CARB
12A4

£0.66 exc vat

£0.79 inc vat
CARB HIF38/44 ABUTMENT BRACKET
CAM4942

Metal bracket that fits between the manifold and the HIF44 (1.75")carb to hold the cable - the choke cable clip for this bracket is CZK6491. Also for HIF38. For HS4 carb see 12G766 bracket. Original Turbo type [...

£11.93 exc vat

£14.32 inc vat
STAINLESS STEEL HEATER TAP STUD SET
C-STR285

replacements in stainless steel for the heater tap elbow on the cylinder head.

Quantity required one kit per car

£4.00 exc vat

£4.80 inc vat
MANIFOLD STUD FOR TWIN HS2 INLET
CHS2614

Originally quoted as the HS2 twin carb manifold stud it is one thread longer than CHS2613 which was for single HS2 and spin on oil filter head to the block. UNC course thread for manifold or block and UNF for th...

£1.83 exc vat

£2.20 inc vat
ROCKER COVER CHROME FITTING NUT / ERA BUMP STOP NU...
GM038P

Chrome Rocker bolt with UNF thread. Original Rocker cover bolts are dull zinc coated or painted but the chrome type look much better and cheaper.

A longer threaded version CAM6823 was used on prestige Minifin alloy type A series...

£4.20 exc vat

£5.04 inc vat
BLANKING PLUG INLET MANIFOLD & CYL HEAD
ADP210

This 5/8unf steel hexagonal head blanking plug was made for the inlet manifolds where the servo union can be fitted, plus blanking off the thermal transmitter hole under the thermostat. Uses 1B3664 washer ----------please note this will ...

£3.57 exc vat

£4.28 inc vat
CHROME FIXINGS FOR ROCKER COVER
SAC71L

A simple way to dress up that engine compartment while at the same time insuring all the proper hardware is in place. A kit includes 2 each of British made chrome sleeve nuts, spacers and special cup washers, Fits all A & B series engines.

F...

£13.49 exc vat

£16.19 inc vat
ROCKER COVER BLUE T BAR KIT
SAC71BLUE

Anodised in blue for that different look.

£12.00 exc vat

£14.40 inc vat
HEAT SHIELD BLACK KIT TWIN HS2
MSSK008

Twin carb HS2 (1.25")black heatshields with link bar and 3 new return springs.

£26.47 exc vat

£31.76 inc vat
15" BRAIDED PETROL PIPE 1/4" BORE
PPK6

Before the days of Aeroquip, Minis were fitted with braided steel rubber fuel lines. They should be used in place of rubber for all fuel lines in the engine compartment. They come made to length, with rubber end caps. 1/4" bore size.

Orange ...

£4.24 exc vat

£5.09 inc vat