SPEEDO CABLE L/H/D 29" LONG 1988 on

GSD488

£14.25 exc vat

£17.10 inc vat

In stock

29" long for L/H/D cars from about 1988 on when Seiko nippon speedo gauges are fitted. earlier cars used a 33" cable GSD102 which had the grey end but are interchangable and cheaper.

£14.25 exc vat

£17.10 inc vat

In stock

Recommended usage 1 x GSD488 to fit one mini.

Speedo cable and fittings, clock and gauges - Qty 1

Alternative products

SPEEDO CABLE CLUBMAN CABLE 33"LONG

GSD102

These have push-on connectors at the speedometer. Fits R/H/D Clubman and late L/H/D Minis to 1988 with the gauges in front of the driver. Longer versions are GSD487 at 42.5" and GSD415 at 48" long, this is also used on LHD w...

£10.43 exc vat

£12.52 inc vat

People also bought products

FIBRE WASHER FOR OIL GAUGE

2K4936B

Sealing washer for the oil gauge to oil pipe as sold in OL kit and for 21A804 metal pipe to oil gauge.

£0.20 exc vat

£0.24 inc vat

BRAIDED OIL GAUGE PIPE 48" LONG

C-AHT9

With this large diameter line to the oil pressure guage you can actually see minor fluctuations in the pressure at idle or when the relief valve bounces open and closed. Because the braided steel line is one piece from the block to the gauge there is...

£39.09 exc vat

£46.91 inc vat

ADAPTOR ANGLED FOR OIL GAUGE PIPE

OAA

Angled oil pipe adaptor for fitting in confined spaces to eradicate damage of oil pipe, requires an OA adaptor if being used with a oil pressure gauge/t-piece.

£10.43 exc vat

£12.52 inc vat

OIL PRESSURE GAUGE NYLON PIPE 5 FOOT LONG

Oil pipe in plastic 5 feet long, if fitting to a Tim gauge you will require LMA017 adaptor for the gauge.

Not comppatable with the CAM6431 standard oli pressure block union, and OA shoudl be purchased to fit.

£10.43 exc vat

£12.52 inc vat

ADAPTOR FOR PRESSURE OIL GAUGE PIPE

Oil gauge adaptor for fitting into engine block or T piece.

£7.43 exc vat

£8.92 inc vat

OIL GAUGE T PIECE

A must if you want to run a mechanical oil gauge and retain the oil warning switch. Screws straight into the block on all A series engines.

£9.52 exc vat

£11.42 inc vat

TEMPERATURE GAUGE ADAPTOR

TE5

Male to female brass spacer/adapter for mechanical water temp guage screws into head & accepts capillary tube. Required for SIB422 and SIB422MG. Also fits in MOCOT1

£8.33 exc vat

£10.00 inc vat

SPEEDO CABLE 30" THREADED BOTH ENDS

0722-30

Speedometer cable, 30" long for Smiths type central speedo-original was 26" long

£10.43 exc vat

£12.52 inc vat

SPEEDO CABLE 39" THREADED BOTH ENDS

0722-39

Mini Moke Speedo Cable for the Centre clock type speedo,also 13" longer to allow the Smiths type central speedo to be moved.

£10.73 exc vat

£12.88 inc vat

HEX SCREW FOR VAN TANK PETROL SENDER UNIT

53K165

If you have an early Mini saloon or Estate/Van or Pickup with the fuel tank sending unit held in by screws, this is the correct screw for you.

Do not forget the special copper washers also 2A2088 and the cork gasket [link]2H10...

£0.59 exc vat

£0.71 inc vat

ADAPTOR FOR TIM GAUGE WHEN FITTING OL PLASTIC OIL ...

LMA017

You will need this union for your Tim gauge if you fit a replacement plastic oil pipe part number OL

£6.30 exc vat

£7.56 inc vat

SPEEDO CABLE 66" THREADED BOTH ENDS/SPRITE & MIDGE...

0722-66

Longest cable we keep for fitting a Smiths central type speedo when engine in rear of kit car. This is the correct cable for a Sprite or Midget, not a universal cable. Includes inner cable and outer sheath.

£14.11 exc vat

£16.93 inc vat

SPEEDO CABLE 36" THREADED BOTH ENDS.

0722-36

Extra long cable for Smiths central located speedo when position moved in dash and also used as a Tacho cable for Sprite, 36" long.

£10.73 exc vat

£12.88 inc vat

SPEEDO CABLE 48" THREADED BOTH ENDS

0722-48

48" extra long speedo cable for special fitmentswhen using original type Smiths central mounted speedo.

£14.50 exc vat

£17.40 inc vat

CAPLESS BULB FOR ALL SIDE SPEEDO CLUSTERS 2.2 WATT...

GLB2132

2.2 WATTS and fits back of gauges in cars with 3 extra 52mm round clocks.

£0.27 exc vat

£0.32 inc vat

SPEEDO CABLE VEGLIA/JAEGAR 1275 INNOCENTI CLOCKS

L362120

Speedo cable for most Innocenti made minis which had Veglia speedo clocks.

26"

£11.47 exc vat

£13.76 inc vat

CENTRE CLOCK WIRING HARNESS

PM05

This is the wiring short conversion loom that fits to the old central speedo and is used by people modifying from 2 or 3 clock dashes to single clock or just repairing damaged looms. With the correct bulb holders and spade fittings. Now uses 5x [link...

£44.00 exc vat

£52.80 inc vat

METAL OIL PIPE ENGINE END APPROX 13"LONG BLOCK TO ...

CAM4202

This is the original type of metal pipe that fitted from the engine to the

hose on cars with central speedo and gauges. The pipe that went from the rubber hose to the gauge was 21A804. The hose is FAM2807.

...

£14.88 exc vat

£17.86 inc vat

SPEEDO CABLE CLUBMAN CABLE 33"LONG

GSD102

£10.43 exc vat

£12.52 inc vat

SPEEDO CABLE MINI 26" LONG FOR CENTRAL SPEEDO