(¥178) £178.19 exc vat
(¥214) £213.83 inc vat
In stock
(¥178) £178.19 exc vat
(¥214) £213.83 inc vat
In stockRecommended usage 1 x C-GRH006RED to fit one mini.
Spring clip for securing the top hose on MPI front mounted radiator models, now in stainless steel.
Silicone heater hose, 1 Metre for cars with the inline type heater valve or a straight take off on the cylinder head as fitted to post 1984 cars.
Radiator hose kit for all spi Minis. This kit has top and bottom radiator hoses and 2 lengths of heater hoses…all in shiney blue Silicone that should last forever and not degrade with heat, time and environment. This kit is ideal for both the racer w...
Water pump fitting kit for models without bypass facility, includes new bolts, washers and superseal gasket.
long life silicon top radiator hose for the single point injection cars and HIF38 Carb cars.
This is made to fit cars with a thermostat sandwich plate and has a slightly different shape from the Cooper S and 1275 top hose where the thermosta...
A much better looking under bonnet item this bright blue hose will last much longer than rubber -made in silicon-will fit original plastic type radiator outlets or latest metal type outlets.
Water hose pipe clip for the GRH1140 top hose and twin point injection cars which had larger hoses fitted .This clip will wind down to fit most radiator hoses if required.
Hose clip for 5/8" heater hose and used to locate 3/4" diameter anti roll bar in our C-AJJ4008 kit.
The original factory radiators had a seal to hold the switch in but on our special 2 core and 4 core radiators we used this screw in type switch for extra safety. Already fitted to mini Spares own radiators when originally sold, this is the replaceme...
MPI only. 3 YEAR GUARANTEE-UK made.Large impeller higher capacity water pump. Mini Spares procured product as original Rover Airtex tooling has been scrapped.
Fitted with a PPS, glass filled plastic impeller as used by Jaguar and Aston Marti...
Mini Spares own exclusive designed Lightweight aluminium type high efficiency radiator with good fitment, rigidity and appearance, unlike others on the market with 4 large ugly fixing nuts on each side, or where the header tank is 10mm wider that fou...
This thermostat housing fitting kit, suitable for all single tier thermostat housings. Comes with new studs, nuts, washers and Klinger thermostat housing gasket
Expansion tank for 1996 on cars with front mounted radiator. This is made in aluminium as the original is liable to break. The original threaded type plastic cap that would allow water to escape cannot be used, so a new rad cap is included. An overfl...
"4-Core" Radiator the only real "4-core" radiator available today is supplied by MiniSpares of London. This is the C-ARA4444B radiator plus the sender unit for later cars 1991 on. Their design has been proven to be the best 4-core at...
Probably the most changed stud on the mini. This is the length used on every A series engine until the introduction of the sandwich plate when longer ones were required. A stainless steel variety C-STR286 is available which we do recomme...
Thermostat 88 degrees. Fitted to 998 and 1275 minis from 1988 to 2000. Also Metros 1980 to 1990 998 and 1275.
Heater valve studs fitted to the cylinder head. 1/4"unf 1.1250" long.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.