CROSS MEMBER SQUARE TUNNEL FOR ROD CHANGE MINIS ON...

The crossmember holds the seat brackets and has the correct shape on the bottom to sit correctly on the floor of the rod change tunnel only. This is the complete section from inner sill one side to the other. Fits all square type rod change gearbox f...

(¥59) £59.20 exc vat

(¥71) £71.04 inc vat

BRACKET REAR SEAT TO FLOOR STRENGTHENER

14A6624

Bracket from the centre of the transmission tunnel up to the centre of the back seat pan

(¥13) £13.00 exc vat

(¥16) £15.60 inc vat

FLOOR PAN & XMEMBER FOR ROD CHANGE SALOON 1976-96

ADA36002E

The last type of rod change rib design floor made for the assembly line fits cars from 1973-96-It has a large rib down the centre of the L/H side

This floor produced from genuine tools has the crossmember fitted with the sill panels and ja...

(¥650) £650.00 exc vat

(¥780) £780.00 inc vat

GENUINE CROSS MEMBER SQUARE TUNNEL FOR ROD CHANGE ...

CZH2675GENUINE

(¥65) £65.00 exc vat

(¥78) £78.00 inc vat

HANDBRAKE MOUNTING REAR BRACKET 1976 ONWARDS

CZH3213

Rear handbrake bracket. 1976 onwards for single cable lever. Welds to tunnel. Not included on CZH2669 floor. For forward bracket see CZH3214.

(¥10) £10.44 exc vat

(¥13) £12.53 inc vat

UNDER FLOOR WIRING PIPE CLIP METAL TAG LONG

CW100120

wiring tag 55mm long and 70mm overall.

(¥1) £1.28 exc vat

(¥2) £1.54 inc vat

UNDER FLOOR WIRING PIPE CLIP TAG SHORT

CW100110

wiring tag short 25mm and 42mm overall

(¥1) £1.34 exc vat

(¥2) £1.61 inc vat

FRONT FLOOR PAN L/H PRESHAPED

MS25L

You can spend hours cutting out rust and patching holes, but why bother? These reproduction floor pans extend the full width with vertical flanges for easy installation and fairly well represent the original stamping. They have added metal to include...

(¥33) £33.00 exc vat

(¥40) £39.60 inc vat

CROSS MEMBER SQUARE TUNNEL FOR ROD CHANGE MINIS ON...

CZH2675

The crossmember holds the seat brackets and has the correct shape on the bottom to sit correctly on the floor of the rod change tunnel only. This is the complete section from inner sill one side to the other. Fits all square type rod change gearbox f...

(¥59) £59.20 exc vat

(¥71) £71.04 inc vat

FRONT FLOOR PAN R/H PRESHAPED

MS25R

You can spend hours cutting out rust and patching holes, but why bother? These reproduction floor pans extend the full width with vertical flanges for easy installation, and fairly well represent the original stamping. They have added metal to includ...

(¥33) £33.00 exc vat

(¥40) £39.60 inc vat

SLINGING BRACKET R/H REAR

24A42

Every mini saloon has these,2 of 24A41 on either side front and 24A42 /24A43 sided on the rear --only purpose was for building/moving/ storing and preparation of cars at the factory to sit them on ..Also acted as a stiffener...

(¥7) £7.00 exc vat

(¥8) £8.40 inc vat

SLINGING BRACKET FRONT

24A41

Every mini saloon has these,2 of 24A41 on either side front and 24A42 /24A43 sided on the rear --only purpose was for building/moving/ storing and preparation of cars at the factory to sit them on . Also acted as a stiffener...

(¥7) £7.00 exc vat

(¥8) £8.40 inc vat

SILL PANEL L/H VAN & ESTATE Mk3 profile 4" wide

14A9027

outer sill panel for van and estate versions L/H from genuine tooling but we consider it a MK3 floor shape pressing

(¥40) £40.00 exc vat

(¥48) £48.00 inc vat

SILL PANEL R/H VAN & ESTATE Mk3 profile 4" wide

14A9026

outer sill panel for van and estate versions r/h from genuine tooling but we consider it a MK3 floor shape pressing-6 flute indentations 6 flute indentations

(¥40) £40.00 exc vat

(¥48) £48.00 inc vat

SLINGING BRACKET L/H REAR

24A43

Every mini saloon has these,2 of 24A41 on either side front and 24A42 /24A43 sided on the rear --only purpose was for building/moving/ storing and preparation of cars at the factory to sit them on ..Also acted as a stiffener...

(¥7) £7.00 exc vat

(¥8) £8.40 inc vat

BOOT FLOOR PANEL REAR SECTION ONLY ABOUT 10" DEEP

MS54

This 9.5" rear section of the boot (trunk) floor is ideal for collision or rust repair. Many times if you are hit from the rear the floor right in front of the bumper gets damaged-this will fix it. If rust is your problem, then this along with a new ...

(¥32) £32.00 exc vat

(¥38) £38.40 inc vat

FLOOR TO WHEEL ARCH BRACKET L/H NON GENUINE

14A6610MS

Rear subframe mounting stiffener L/H repair bracket with holes for subframe mounting and attaches to wheel arch Fits on ALA8623

(¥13) £13.35 exc vat

(¥16) £16.02 inc vat

FLOOR TO WHEEL ARCH BRACKET R/H NON GENUINE

14A6609MS

Rear subframe mounting stiffener panel R/H with holes for subframe mounting to wheel arch. Sits on ALA5524 or ALA5528

(¥13) £13.35 exc vat

(¥16) £16.02 inc vat

REAR SEAM TO ARCH REPAIR PANEL LH

MSP017L

Body side rear lower w/arch to rear section of bodyside repair L/H. 220mm tall.

(¥14) £14.40 exc vat

(¥17) £17.28 inc vat

DOOR BOTTOM REPAIR MK1 L/H

MSP002L

Repair section of bottom of door for external hinge cars, MK1/2.

This crude non genuine parts is the only repair section available for early doors apart from door skins.Lots of stretch marks and wrinkles but they have been fitted by customer...

(¥63) £62.64 exc vat

(¥75) £75.17 inc vat

DOOR BOTTOM REPAIR MK1 R/H

MSP002R

Repair section of bottom of R/H door for external hinge cars, MK1/2.

this crude non genuine parts is the only repair section available for early doors apart from door skins. Lots of stretch marks and wrinkles but they have been fitted by cus...

(¥63) £62.64 exc vat

(¥75) £75.17 inc vat

DOOR SKIN LOWER OUTER REPAIR MK3 L/H

MSP011L

non genuine L/H outer MK3 door skin lower few inches repair section.

not as good a fit or looking as the genuine complete skinCZH3301

(¥23) £22.50 exc vat

(¥27) £27.00 inc vat

INNER SILL L/H SALOON NON GEN

MSP001L

Non genuine L/H saloon inner sill. Only made as an after market replacement as no genuine part was ever available seperately. Best one on the market for a comlplete inner sill replacement panel. With carpet fix brackets.

(¥21) £21.00 exc vat

(¥25) £25.20 inc vat