DISTRIBUTOR 998 59D ELECTRONIC A PLUS
ADU5789MS

($75.00) £75.00 exc vat

($90.00) £90.00 inc vat

In stockIn stock
Electronic Distributor for any standard A+ 998cc. Negative earth only.



From 1982on 998cc were fitted with a ballast coil which means a new wire must be fitted from fusebox top left terminal where there is a large white cable to the...

($75.00) £75.00 exc vat

($90.00) £90.00 inc vat

In stockIn stock

Recommended usage 1 x ADU5789MS to fit one mini.

Alternative products
DISTRIBUTOR 65D 90-93 HIF44 CARB COOPER
AUU1536

Electronic Ignition distributor, fitted as standard to all 1300 Carb Cooper models. Also Metro 1275cc engine.

Replacement service items for this are:

Cap GDC156

Rotor arm GRA2143

Should be used with GC...

($80.50) £80.50 exc vat

($96.60) £96.60 inc vat
DISTRIBUTOR ELECTRIC EVOLUTION PERFORMANCE TO 276 ...
C-27H7701

A Plus Electronic Ignition distributor with vac unit, modified to our spec in UK to give best performance on any minis with std to 276 camshaft profile.

Ideal for our EVOLUTION001 camshaft

Brand New distributor complet...

($82.50) £82.50 exc vat

($99.00) £99.00 inc vat
People also bought products
DISTRIBUTOR HOLE BLANKING PLUG A+
DIZZYPLUG02

Lightweight billet aluminium distributor hole blanking plug for A+ engines.

($17.50) £17.50 exc vat

($21.00) £21.00 inc vat
DISTRIBUTOR ELECTRIC EVOLUTION FOR 285-296 CAMS
C-27H7699

Pre A plus Electronic Ignition distributor, with vac unit modified to give better performance on any minis with 285/286/296 camshaft profiles

Brand New distributor complete with electronic conversion already fitted.

PRE A PLUS
<...

($82.50) £82.50 exc vat

($99.00) £99.00 inc vat
DISTRIBUTOR ELECTRIC EVOLUTION PERFORMANCE TO 276 ...
C-27H7698

Pre A Plus Electronic Ignition distributor with vac unit, modified to our specification in the UK to give best performance on any minis with std to 276 camshaft profile.

Brand New distributor complete with electronic conversion already fitt...

($82.50) £82.50 exc vat

($99.00) £99.00 inc vat
VAC UNIT 45d/59d FOR 1275cc
37H8379MS

Fits our 45/59d distributors, 1275cc as fitted to 12G4180 and ADU3825

Along with our distributor manufacturer we have found this to be the best for modern day fuels for all 45 or 59d distributor for 1275cc uses as...

($6.60) £6.60 exc vat

($7.92) £7.92 inc vat
DISTRIBUTOR 25D WITH VAC ELECTRONIC - NEG EARTH
GEU930MS

NEGATIVE EARTH ONLY..Reproduction CONTACTLESS Distributor suitable for modern day fuels for 850 and 998cc pre 1974 with upgraded rotor arm "Negative earth only". A worn out distributor can cost you both performance and economy. Precise spark timing ...

($72.00) £72.00 exc vat

($86.40) £86.40 inc vat
DISTRIBUTOR 45D ELECTRONIC pre A PLUS NEG EARTH ON...
BAU1962MS

NEGATIVE EARTH ONLY..45D electronic(contactless)Pre A plus distributor .

replaces 41824A and 41418 plus any 998/1098cc up to the changeover of A plus type distributors. For best performance and tune we advise our electronic evolution versio...

($67.50) £67.50 exc vat

($81.00) £81.00 inc vat
DISTRIBUTOR 23D ELECTRONIC NEG EARTH
12G2140MS

NEGATIVE EARTH ONLY. Cooper"S" 23D distributor, no vac unit-This is NOT THE ORIGINAL LUCAS ITEM but a new contact less electric copy of 40819 to cope better with modern day fuels. Fitted with the better Red rotor arm upgrade.Cheaper than many electro...

($72.00) £72.00 exc vat

($86.40) £86.40 inc vat
SCREW KIT FOR 45D / 59D DISTRIBUTORS
57H5135

These are the screws needed to fix the condensor, points, base plate and vacuum to 45D and 59D distributors. For 23/25D type see 17H5106

($1.80) £1.80 exc vat

($2.16) £2.16 inc vat
DISTRIBUTOR CAP RETAINING CLIP FOR 45D DIZZY'S
GDC136CLIP

Replacement distributor cap retaining clip for all 45D type distributors-sold per clip.

($2.50) £2.50 exc vat

($3.00) £3.00 inc vat
IGNITION MODULE FOR ELECTRONIC DISTRIBUTOR
NJC10001

Replacement Distributor ignition module fitted to all standard electronic ignition distributors (non injection) looking at the front of module, negative is on the left. positive on right and centre pin is not used.

($30.00) £30.00 exc vat

($36.00) £36.00 inc vat
DISTRIBUTOR CAP FOR 123 ELECTRONIC DISTRIBUTOR
GDC123

If you have a new 123 ELECTRONIC distributor this is the replacement cap.

For earlier 123 distributors please see part number GDC123E.

Rotor arm is GRA123

($21.00) £21.00 exc vat

($25.20) £25.20 inc vat
O RING SEAL ON DISTRIBUTOR HOUSING PRE A+
13H2792

the oil seal to fit on 12A1136 distributor housing. Pre A Plus

the earlier housing 2A612 did not have a seal.

($0.85) £0.85 exc vat

($1.02) £1.02 inc vat
CONTACT POINTS MINI+METRO POST 80 DUCELLIER DISTR...
GCS119

fitted to ducellier distributors only which are recognised by their red cap.

($4.50) £4.50 exc vat

($5.40) £5.40 inc vat
DISTRIBUTOR SPINDLE O RING SEAL
513682A

The O ring that actually sits on the distributor drive spindle shaft in the recess provided.

($0.48) £0.48 exc vat

($0.58) £0.58 inc vat
VACUUM PIPE ELBOW
12B2062

The stock vacuum advance distributor is connected to the carb/manifold by a small rubber joint that in turn is mated to metal line that fits the distributor. If the little rubber connector is deteriorated it could allow a vacuum leak at the carb and ...

($2.25) £2.25 exc vat

($2.70) £2.70 inc vat
DISTRIBUTOR PIGTAIL WIRE AND PLASIC FITTING
37H2981

This "Pigtail" wire is all that carries current through the distributor to the points.Fits 23 and 25d type distributors

($9.38) £9.38 exc vat

($11.26) £11.26 inc vat
DISTRIBUTOR CAP FOR 25D DISTRIBUTOR TOP ENTRY
GDC103

Top-entry cap takes plug-in wires and will interchange with GDC102. This is an alternative for side entry cap GDC102 which some believe is less prone to wet-weather problems. Features aluminium contacts.

($4.80) £4.80 exc vat

($5.76) £5.76 inc vat
DISTRIBUTOR ORIGINAL MINI 25D TYPE WITH VAC UNIT
GEU930

Range of distributors with modern day curves built,programmed and tested for Mini Spares in UK.

Beware of cheap China made units that are poorly made- see note at bottom. GEU930 25D 850/early 998

12G2140 ...

($43.83) £43.83 exc vat

($52.60) £52.60 inc vat
CONNECTOR FOR ADVANCE RETARD VACUUM PIPE
12B2095

Straight rubber connector pipe. The standard vacuum advance distributor is connected to the carb/manifold by a small rubber joint that in turn is mated to metal line that fits the distributor. If the little rubber connector is deteriorated it could a...

($0.90) £0.90 exc vat

($1.08) £1.08 inc vat
DISTRIBUTOR SHIELD COVER FOR ELECTRICS LATEST TYPE
BHM1675

The current genuine large plastic shield with all fittings required to cover the engine electrics.

Parts are available seperately:

The plastic clips are 13H6461.

Upper bracket is NJU10002 x 2 requ...

($29.79) £29.79 exc vat

($35.75) £35.75 inc vat