HANDBRAKE CABLE VAN. FRONT SECTION. MK4/1976 29.25...
FAM625

($4.40) £4.40 exc vat

($5.28) £5.28 inc vat

In stockIn stock
From 1976 the handbrake cable layout was changed --instead of two cable from the handbrake it was changed to one. Front for the saloons is GVC2135 at 25" long and the van requires a 29.5" long cable which this one is. The cable between the wheels is the same GVC2134

($4.40) £4.40 exc vat

($5.28) £5.28 inc vat

In stockIn stock

Recommended usage 1 x FAM625 to fit one mini.
Handbrake Lever & Cables - Qty 1

Recommended products
HANDBRAKE CABLE. REAR SECTION MK4/1976 ON
GVC2134

From 1976 the handbrake cable layout was changed, instead of two cable from the handbrake it was changed to one. Front for the saloons GVC2135 is 25" long and the van requires 29.5" long which is available as FAM625. This is...

($4.88) £4.88 exc vat

($5.86) £5.86 inc vat
People also bought products
GENUINE AP LOCKHEED HANDBRAKE LEVER GAITOR
17H7612GENUINE

Rubber gaiter to keep debris from entering the drum via the backplate handbrake lever SMN10005. Sold singly per backplate, 2 required per car.

Genuine AP Lockheed rubber boot

($5.03) £5.03 exc vat

($6.04) £6.04 inc vat
HANDBRAKE CABLE. REAR SECTION MK4/1976 ON
GVC2134

From 1976 the handbrake cable layout was changed, instead of two cable from the handbrake it was changed to one. Front for the saloons GVC2135 is 25" long and the van requires 29.5" long which is available as FAM625. This is...

($4.88) £4.88 exc vat

($5.86) £5.86 inc vat
HANDBRAKE CABLE - VAN & ESTATE PRE 1976 TWIN CABLE...
GVC1020

For mk1/2/3 Van,Pickup,Estate upto 1976 which had 2 cables from the lever.

FOR SALOON MODELS USE GVC2022

($4.50) £4.50 exc vat

($5.40) £5.40 inc vat
HANDBRAKE CABLE DRY SUSPENSION PRE 1976 SALOONS
GVC2022

If your car has 2 cables running from the lever as per pre 1976 cars for dry suspension only but NOT VAN,PICKUP and ESTATE

($4.80) £4.80 exc vat

($5.76) £5.76 inc vat
HANDBRAKE CABLE - HYDROLASTIC
GVC1021

Hanbrake cable for hydrolastic cars which used 2 of these and are different from dry suspension cars . SEE GVC2022 for dry pre 1976.

($4.15) £4.15 exc vat

($4.98) £4.98 inc vat
HANDBRAKE LEVER MOUNTING BRACKET 1976 on
CZH3214

This bracket is the main mounting bracket for the handbrake lever assembly and is welded onto the back of the seat crossmember and to the rear floor section.

Only for rod change cars with late type single cable handbrake.

the early ...

($10.00) £10.00 exc vat

($12.00) £12.00 inc vat
HANDBRAKE ADJUSTER NUT
31G5049

special shaped nut for handbrake cable at handbrake end



Twin cable use 2A5858

($1.50) £1.50 exc vat

($1.80) £1.80 inc vat
HAND BRAKE LEVER RUBBER GRIP 1976 on
FAM8356

The rubber type grip fitted on handbrakes-

will fit any single cable hand brake from 1976 on

Mk1/2 used 13H5541 thinner plastic type--to fit this to pre 1976 early cars you will need to put lots of sticky tape on the h...

($5.10) £5.10 exc vat

($6.12) £6.12 inc vat
SEALING PAD HANDBRAKE FAIRLEAD
21A385

($0.80) £0.80 exc vat

($0.96) £0.96 inc vat
HANDBRAKE CABLE FRONT SECTION. MK4/1976 ON 25"LONG
GVC2135

From 1976 the handbrake cable layout was changed, instead of two cables from the handbrake it was changed to one. Front for the saloons is 25" long and the van requires 29.5" long which is available as FAM625. The cable between the wheel...

($3.40) £3.40 exc vat

($4.08) £4.08 inc vat
WASHER FOR HANDBRAKE SECTOR
2K5806

This washer sat under the 21A2454 quadrant on earlier dry suspension cars but was replaced by a concave thinner washer AWZ105 when they reverted to CLZ549 clevis pin.

($0.46) £0.46 exc vat

($0.55) £0.55 inc vat
SPLIT PIN FOR CLZ409 HANDBRAKE LEVER / ROCKER SHAF...
GFK101

For CLZ409 clevis pin on rear brake levers.

Split pin for common clevis pin list

GFK101 for CLZ409 handbrake levers to cable on rear drum

GFK102 most mini clevis pins exce...

($0.05) £0.05 exc vat

($0.06) £0.06 inc vat
HANDBRAKE HELPER SPRING
ACH8508

Spring for the cable where it joins the handbrake.

($1.20) £1.20 exc vat

($1.44) £1.44 inc vat
HANDBRAKE LEVER GAITER ON REAR BACKPLATE
17H7612

Rubber gaiter to keep debris from entering the drum via the backplate handbrake lever SMN10005. Sold singly per backplate, 2 required per car.

($2.20) £2.20 exc vat

($2.64) £2.64 inc vat
HYDRO QUADRANT SPRING WASHER
2K2545

special double coil spring washer which fits on the rear hanbrake quadrant on Hydrolastic cars only.Known as a thackery washer

($0.39) £0.39 exc vat

($0.47) £0.47 inc vat
HAND BRAKE LEVER PLASTIC GRIP
13H5541

The stock bare metal handle can be cold, clammy and slippery; this rubber grip slips on the handle for added comfort on all cars with twin handbrake cables.

($3.24) £3.24 exc vat

($3.89) £3.89 inc vat
HAND BRAKE ALLOY GRIP
SP224

($9.78) £9.78 exc vat

($11.74) £11.74 inc vat
WASHER FOR HANDBRAKE QUADRANT CLEVIS PIN
AWZ105

Concave washer for the CLZ549 pin on the quadrant of dry suspension minis.

($0.18) £0.18 exc vat

($0.22) £0.22 inc vat
HANDBRAKE FAIRLEAD PLATE
ACA5522

Handbrake fairlead plate on the floor for the cable to go through. Make sure you renew the sealing washer SPK10002.

($1.50) £1.50 exc vat

($1.80) £1.80 inc vat
KAD HANDBRAKE QUADRANT ALLOY SET FOR REAR BRAKES
C-AJJ4018

Pretty alloy handbrake quadrants for those special cars, with an extra 6 cut out holes giving extra lightness. Dry suspension cars pre 1976 only.

Supplied as a pair.

($45.00) £45.00 exc vat

($54.00) £54.00 inc vat