RUBBER FRONT BRAKE PIPE DRUM BRAKE

GBH170

($7.65) £7.65 exc vat

($9.18) £9.18 inc vat

In stock

We all believe that our life often depends on our braking system. But how can you tell when "it's good enough"? The flexible rubber brake hoses are a prime area for concern. The hose is both exposed to road grime (rain and dirt) but it is also exposed to constant flexing from suspension movement. While they are normally very thick, visible cracking should raise an alarm. This is typically caused by the elements but should be viewed as a indication of age. Of equal concern is the inside of the hose. While there is no way to inspect it, an old hose actually swells up inwardly, often reducing the area that the fluid flows through to half or less. The best precaution is preventive maintenance. If you can see cracking on the outside, replace them.

For early type front drum brake minis a car set is available as GBH170KIT saving costs.

($7.65) £7.65 exc vat

($9.18) £9.18 inc vat

In stock

Recommended usage 2 x GBH170 to fit one mini.

Single Line Brake Pipes - Qty 2

Diagonal Split System with 4 way Failure Switch-E - Qty 2

Diagonal Split - Qty 2

Brake Pipes - Front to Rear - Qty 2

People also bought products

BRAKE PIPE FRONT BRIDGE BETWEEN CYLINDERS LH

21A1207

Pre brent steel brake pipe between the two wheel cylinders on the front drum brakes, LH side.

($9.60) £9.60 exc vat

($11.52) £11.52 inc vat

BRAKE PIPE FRONT BRIDGE BETWEEN CYLINDERS RH

21A1206

Pre brent steel brake pipe between the two wheel cylinders on the front drum brakes, RH side.

($9.60) £9.60 exc vat

($11.52) £11.52 inc vat

BRAKEPIPE KIT SINGLE LINE DRY SUSPENSION LESS SERV...

GL4991

Single line L/H/D - dry suspension - no servo fitted. If you have drum brakes and a servo you should use GL4992 plus 2 of HF10.

These kits or pipes are approx 35% off retail.

($100.28) £100.28 exc vat

($120.34) £120.34 inc vat

BRAKE PIPE CONECTOR

BCA4002

Brake pipe connecting piece originally used on diagonal split system.1.25" long

($3.51) £3.51 exc vat

($4.21) £4.21 inc vat

BRAKE PIPE KIT 75-76 DIAGONAL SPLIT LHD

GL5014

Diagonal slit system with PDWA valve L/H/D only approximately 1974 -76 only

You'd think that the way Minis leak oil they'd never rust on the underside, but they do! If your Mini is rusty below it is a good idea to check your metal brake line...

($126.11) £126.11 exc vat

($151.33) £151.33 inc vat

BRAKEPIPE KIT LHD BRAKE PIPE KIT HYDROLASTIC

GL5001

Single line kit L/H/D when no servo. This kit contains all the pre-made lines required to replace all the brake lines on a left hand drive Hydrolastic Mini. The copper tubing is easy to shape and will never rust!-includes 2 bridge pipes for front whe...

($108.86) £108.86 exc vat

($130.63) £130.63 inc vat

BRAKE OR CLUTCH PIPE TO MASTER CYLINDER

HF12

Easy bend copper 12" brake pipe with 2 male ends for single line master cylinders---for clutch or brake on early minis but the longer HF14 might be easier for the brake master which was nearer 13" long. These kits or pipes are at least 3...

($8.64) £8.64 exc vat

($10.37) £10.37 inc vat

BRAKE PIPE 3 WAY TO REGULATOR SALOON

HF101

Front to rear brake pipe, 101" in length. Includes male fittings on each end. Some early dry cars used a 103" pipe.

($16.66) £16.66 exc vat

($19.99) £19.99 inc vat

BRAKE PIPE REGULATOR TO N/S/R HOSE HYDROLASTIC ONL...

HD26

Easy bend copper brake pipe 26" long with one female and one male end - used on hydrolastic cars from regulator valve to near side rear hose. These pipes are retail less 35% discount at least to keep prices viable.

($10.34) £10.34 exc vat

($12.41) £12.41 inc vat

MASTER CYLINDER PAIR OF BRAIDED BRAKE LATE SERVO H...

SEN45

From 1989 minis which have the brake servo built into the master cylinder and it is very difficult to work in the engine bay, especialy clutch changes because of the extra room taken up by this dual cylinder. By replacing the 2 metal brake pipes from...

($39.74) £39.74 exc vat

($47.69) £47.69 inc vat

FEMALE BRAKE UNION UNF THREAD

TN606031

UNION FOR BRAKE PIPES IF YOU HAVE A DO IT YOURSELF FLARING KIT.

($1.41) £1.41 exc vat

($1.69) £1.69 inc vat

MALE BRAKE UNION METRIC THREAD

TM110051

Male metric brake union as used on front to rear PDWA valve and later master cylinders. Pipes should be double flared.

($1.27) £1.27 exc vat

($1.52) £1.52 inc vat

BRAKE PIPE 3 WAY TO BRAKE SWITCH DRY 16" TO 1969

HF17

Easy bend long life copper brake pipe with 2 male ends and ideal and best replacement for the original 16" pipe from the 3 way union to the brake switch on single line dry suspension minis. These kits or pipes are at least 35% off retail.

($9.26) £9.26 exc vat

($11.11) £11.11 inc vat

BRAKE PIPE N/S/R TO REGULATOR VALVE DRY SUSPENSION...

HD24

Easy bend copper 24"long brake pipe with one female and one male end for the regulator on the rear subframe to the n/s/r hose on hydrolastic cars only.

Also used on split front to rear system with valve in engine compartment - from 3 way uni...

($10.11) £10.11 exc vat

($12.13) £12.13 inc vat

WHEEL CYLINDER REPAIR KIT FOR GWC126/7 [ LK10544 ]

GRK2002

These repair kits are for the later twin leading front drum brakes wheel cylinders GWC126/7 with .9375" bore size. The earlier twin cylinder set up used part number 8G8816 for GWC102/3 with 0.8125" bore size.

($3.30) £3.30 exc vat

($3.96) £3.96 inc vat

MALE BRAKE UNION UNF THREAD

TM606031

UNION FOR BRAKE PIPES IF YOU HAVE A DO IT YOURSELF FLARING KIT.

($0.32) £0.32 exc vat

($0.38) £0.38 inc vat

BRAIDED 4 LINE BRAKE HOSE KIT

C-AJJ4026

Set of 4 hoses, 2 front and 2 rear.

Braided brake and clutch hoses have a PTFE inner which helps to eliminate the spongy pedal feel under arduous conditions, and give greater efficiency. The outer braided stainless steel cover e...

($50.07) £50.07 exc vat

($60.08) £60.08 inc vat

BRAKE PIPE REG VALVE TO R/H HOSE & REAR W/CYLINDER...

HD8

Made in easy bend non rust material this one will fit the regulator valve on the rear subframe to rear hose on hydrolastic cars only as it is 8" long.

These pipes are retail less 35% discount at least to keep prices viable.

($8.16) £8.16 exc vat

($9.79) £9.79 inc vat

BRAIDED 5 LINE BRAKE HOSE KIT. INCLUDES CLUTCH PRE...

C-AJJ4027

Set of 5 braided hoses. 2 front brakes, 2 rear brakes, and clutch hose for pre A+.

If it is time to replace the brake lines on your Mini, and it probably is, you should consider replacing them with braided-steel hoses. They are direct bolt...

($55.20) £55.20 exc vat

($66.24) £66.24 inc vat

BRAKEPIPE KIT NO SERVO DRUM BRAKES HYDROLASTIC

GB5001

Single line R/H/D brake kit for hydrolastic suspension cars without a servo, including the 2 front wheel cylinder bridge pipes.If you have a servo see kit GB5002.

You'd think that the way Minis leak oil they'd never rust on the ...

($108.86) £108.86 exc vat

($130.63) £130.63 inc vat

Contact Mini Spares

Tel:01707 607700

Email:sales@mininspares.com

Store Details:

Potters Bar|

Harrogate|

Oldbury