POT JOINT INBOARD CV JOINT - NON GENUINE
GCV1102MS

($24.50) £24.50 exc vat

($29.40) £29.40 inc vat

In stockIn stock
Non genuine aftermarket only as the genuine originals are obsolete.

These are the best on the market where clip grooves are in the correct place to save the driveshaft seizing on. Later model Minis have CVs on both ends of the axle; this is the in board joint that extends from the differential. We recommend GSV1073 gaiter kit when a replacement is required. Pre greased and ready to fit.

($24.50) £24.50 exc vat

($29.40) £29.40 inc vat

In stockIn stock

Recommended usage 2 x GCV1102MS to fit one mini.
Drive Shafts with Constant Velocity Joint Nut of - Qty 2
Differential - Qty 2
Driveshafts and CV joints, Drive Flange and Front - Qty 2
Differential Assembly - Qty 2

Recommended products

Thin driveshaft circlip for outer c.v joints.

Also replaced 22G2688 for the inner pot joint circlip. Not required for hardy spicers or rubber cross type inners couplings. Sold singly 2 required per car.

Drive shaft oil seal or diff output shaft oil seal for all Mini's except Cooper S and early Automatics. 2 required per gearbox.

Upgraded version in Viton available us ADU5738VITON

Inboard CV (pot joint) splitting tool used to remove the constant velocity joint from the gearbox by way of driving this wedge-like tool between joint and gearbox. Does not remove joint from driveshaft.

People also bought products

8 slot castle nut for disc brake CV joints. The extra slots make it easier to reach the factory torque setting.

Pair of driveshafts to suit ADO16 / Austin 1100. these shafts are made to accept a GCV1102MS pot joint so that later mini engines and gearboxes can be easily fitted into ADO16's without the need to fit the early rubber cross type drive c...

Metal CV gaitor ties for the outer CV gaitor, slim in design in order to give maximum clearance between CV and hub

Molybdenum Grease supplied in a 500g tub, suitable for the lubrication of CV joints and any other homokinetic joints.

Genuine Mini Spares Heavy duty gaiter kit as supplied with our GCV1013 cv joint, contains rubber gaiter grease and metal clips. We consider this the best available with a special shape to stop rubbing or soiling.

Sold singly-2 r...

Output drive shaft from the differential on Rod change type gearboxes,the teeth very rarely wear badly but the side cover bushes(2A3538)sometimes ruin the shaft causing those dreaded oil leaks from the seals in the output covers CHM85.

these...

These shafts have changed diameter thickness over the years but these are the

original thick type and upgraded to EN24 for competition or standard uses.

this is the left hand short one.

These shafts have changed diameter thickness over the years but these are the

original thick type and upgraded to EN24 for competition or standard uses.

this is the right hand longer one.

Heavy duty needle roller type coupling with plastic ends. The very early Minis used the rubber joint drive couplings GCD101 to eliminate harshness from being transmitted to the passenger compartment. Over the years the rubber will separa...

There are 4 of these to each output flange to which the Hardy Spicer joint bolts. The special philidas nuts for these are our number GFK3431.

Sold Individually.

In board CV joint(pot joint) gaiter kit with plastic clips and grease.

Non Genuine item many sell as GSV1073.

The single largest reason for the failure of this rugged assembly is contamination, dirt and moisture will destroy one ver...

Hardy-Spicer coupling was fitted to the Cooper "S" and all automatic varieties pre Pot joint(inboard cv joint) This U-joint assembly slides onto the driveshaft and bolts to the Cooper S output shaft flange. The U joint fitted to these joints is the s...

Special Tuning hit upon this idea to stop the driveshafts breaking on their rally cars. Do away with the large circlip groove where it broke and weld a spacer on the shaft to locate the CV joint in position. The works department also reduced the stee...

Competition driveshafts made in steel for use with inboard pot joints.

Upgraded to stop ends twisting off. For Hardy Spicer type see C-BTA1265. Circlips not included. 37H8706 is the inner circlip and ensure it fully...

Rubber U-joint for yoke-type driveshafts. These are the only new supply available except for QL5000 alternative.

The very early Minis used the rubber U-joint drive couplings to eliminate harshness being transmitted to the passen...

Inboard CV (pot joint) splitting tool used to remove the constant velocity joint from the gearbox by way of driving this wedge-like tool between joint and gearbox. Does not remove joint from driveshaft.

Top quality nut unlike many sold with CV joints from china.

For genuine nut See BTA249 also. Sold singly

Allegro CV joint. These are the larger Allegro CV joints that some competition cars use, they fit Mini hubs but need the larger driveshafts C-BTA1266.

Front hub nut that screws onto the CV joint of all early minis with drum brakes plus all standard cooper 997/8 models. 1 1/8, 1.125" AF nut size although 28mm width have been seen. The washer for this is 2A7323.

HEAVY DUTY AXLES! The Mini drive shaft or half axles are different from side to side. This, the right side one is the longer of the two. Now for the most part the Mini axle is very long lasting but that is not to say that you can neglect them. The ...