BOLT 1/4"x1.5" UNF
GFK5181

($0.13) £0.13 exc vat

($0.16) £0.16 inc vat

In stockIn stock

($0.13) £0.13 exc vat

($0.16) £0.16 inc vat

In stockIn stock

Recommended usage 1 x GFK5181 to fit one mini.

People also bought products
BOLT 3/8 x 3.5" UNF
BH606281

($0.54) £0.54 exc vat

($0.65) £0.65 inc vat
PETROL TANK STRAP RETAINING BOLT
13H7583

5/16" UNF THREAD 2 1/2" LONG bolt commonly used for 21A2838 petrol tank strap

($0.59) £0.59 exc vat

($0.71) £0.71 inc vat
SETSCREW 5/16" UNF STAINLESS STEEL
GFK5184SS

Stainless steel version of GFK5184, worth keeping a few spare as they are one of the most common bolts fitted to the Mini.

($0.56) £0.56 exc vat

($0.67) £0.67 inc vat
BOLT M8X120MM
FB108241

Bolt for the top alternator bracket on mpi cars.

($1.18) £1.18 exc vat

($1.42) £1.42 inc vat
SETSCREW 5/16" UNF STAINLESS STEEL
GFK5185SS

Stainless steel version of GFK5185, worth keeping a few spare as they are one of the most common bolts fitted to the Mini.

($0.60) £0.60 exc vat

($0.72) £0.72 inc vat
SEAT BELT THREADED ANCHOR PLATE (65mm X 65mm)
681-4

FIA spec anchor plate for eye bolts, used when fitting harnesses. Sold individually, 7/16 UNF 65x65x3mm.

($1.60) £1.60 exc vat

($1.92) £1.92 inc vat
FLANGED BOLT FOR HEAT SHIELD M6x10( rad bolt )
FS106107

m6x10 bolt--ideal for radiators with metric fittings (6 required for rads)

original imperial radiator screws were SH604031 or PK type were ARA1117

($0.91) £0.91 exc vat

($1.09) £1.09 inc vat
BOLT 5/16"UNC 1.75"LONG FOR CLUTCH HOUSING
DAM7759

Clutch housing bolt to engine long 5/16" UNC 1.75" long Fitted ffrom 1985 for clutch housing instead of 22A152 stud

($2.00) £2.00 exc vat

($2.40) £2.40 inc vat
SCREW FOR DOOR LOCK MK3 SPECIAL CUTTING THREAD
ZCT410

Special thread cutting screw 1/4 UNF 1.25" (31mm) long.

Screw to hold the lock assembly on the door of MK3 cars with internal hinges and wind up windows. On new doors or for easy fitment use these special screws with cutting thread (3 sided ...

($0.92) £0.92 exc vat

($1.10) £1.10 inc vat
FLANGED BOLT 5/16" UNF 1.75" LONG. CLUTCH CASE TO ...
DAM7758

Clutch housing bolt to engine long 5/16" UNF 1.75" long with tuflock patch to secure. Earlier bolts less tuflock are {link]BH605141{/link}

($0.83) £0.83 exc vat

($1.00) £1.00 inc vat
REMOTE HOUSING SHORT BOLT 3/8" x 1" UNC
GFK5240

Remote type gearboxes had four UNC bolts holding the long alloy housing to the differential case. These are the shorter two, 3/8"unc 1"long. The longer two are ZCS628.

Also the bolt to hold the starter motor.

Also the bolt for the [...

($0.32) £0.32 exc vat

($0.38) £0.38 inc vat
CLUTCH HOUSING TO BLOCK BOLT 1.75"x5/16"UNF
BH605141

There are 3 of these bolts fitted -1.75"long 5/16"UNF bolt ALTERNATIVE DAM7758.

Also used as longer bolt for water pump.

Also for the 21A1091 heavy duty tie rods on front suspension.

($0.25) £0.25 exc vat

($0.30) £0.30 inc vat
BOLT 5/16"X 1.5" UNC SETSCREW
GFK5235

($0.35) £0.35 exc vat

($0.42) £0.42 inc vat
BOLT 5/16" X 1" UNC SETSCREW
GFK5234

Bolt for CHM85 differential side cover. 1" long UNC useful for pre verto slave cylinder and starter bolt. Also 12A361 engine mounting bracket to alloy case.

($0.17) £0.17 exc vat

($0.20) £0.20 inc vat
SETSCREW 5/16" x 1" UNF
GFK5185

Front subframe to front teardrop mounting, clutch case to block.

Engine mounting to subframe - easier to use than the GFK5184 - 3/4" long

($0.21) £0.21 exc vat

($0.25) £0.25 inc vat
BOLT 1/4"x3/4"UNC LONG FOR C-AJJ4006
GHF160

Bolt used in our anti roll bar kit and for holding plate on speedo drive housing on gearbox

($0.13) £0.13 exc vat

($0.16) £0.16 inc vat
BOLT 1/4"x1" UNF SETSCREW
GFK5180

($0.10) £0.10 exc vat

($0.12) £0.12 inc vat
BLANKING PLUG INLET MANIFOLD & CYL HEAD
ADP210

This 5/8unf steel hexagonal head blanking plug was made for the inlet manifolds where the servo union can be fitted, plus blanking off the thermal transmitter hole under the thermostat. Uses 1B3664 washer ----------please note this will ...

($3.57) £3.57 exc vat

($4.28) £4.28 inc vat
BOLT OVERIDER AND WATER PUMP 5/16" x 1.25" LONG
SH605101

Bolt for the overider to lock plate at the back of the overider to secure it against the bumper.

Also has been used for the rear subframe trunnion 2A5819/21A2558.

Also used for the short water pump bolt.

($0.55) £0.55 exc vat

($0.66) £0.66 inc vat
1/4 UNF 2 INCH BOLT
GFK5182

Sold individually

($0.17) £0.17 exc vat

($0.20) £0.20 inc vat