BRAKE CALIPER REPAIR KIT 8.4"/12" WHEEL - NON GENU...
GRK5008MS

($4.00) £4.00 exc vat

($4.80) £4.80 inc vat

In stockIn stock
Non genuine seal repair kit. Minis from 1984 on with 8.4" discs plus.

This rebuild kit also fits the Midget/Sprite 1098/1275cc front disc brake calipers. The kit includes all the large seals needed to do both pistons in one caliper except for small bridge seal between 2 halves-see 17H7679.

For original genuine Lockheed kit see GRK5008

Easy to install with no special tools required.

($4.00) £4.00 exc vat

($4.80) £4.80 inc vat

In stockIn stock

Recommended usage 2 x GRK5008MS to fit one mini.

Recommended products

Stainless steel 2" diameter caliper piston for 8.4" disc standard mini calipers.

Made in stainless steel to reduce heat transfer to caliper fluid and for longevity.

Not included with any brake pads these days owing to universal usage these

pins and retainer clips should always be changed when fitting new pads.

For vehicles with 8.4" discs and standard 2 pot calipers,1984 onwards.

Genuine O ring seal between the two halves of the standard 8.4" disc size caliper, with only one piston per half. Sold singly per caliper, 2 required per car.

Red Rubber Grease has been specifically designed for use in environments where compatibility with seals and/or resistance to Hydrocarbons is required. Red Rubber Grease is compatible with both natural rubber and synthetic seals. The formulation of th...

Alternative products

Genuine Lockheed seal repair kit. Minis from 1984 on with 8.4" discs plus.

This rebuild kit also fits the Midget/Sprite 1098/1275cc front disc brake calipers. The kit includes all the large seals needed to do both pistons in one caliper exce...

People also bought products

Non genuine seal rebuild kit for Cooper S brake calipers. One kit needed per caliper. When it comes to safety critical parts, only fit the original suppliers' parts as repair kits. The kit includes all the seals needed to do both pistons in one calip...

Genuine O ring seal between the two halves of the standard 8.4" disc size caliper, with only one piston per half. Sold singly per caliper, 2 required per car.

Pack of 4 pins, always required when changing pads--on 8.4 size brake discs as fitted from 1984 onwards. For kit with retainer clips see GBK1026. See GBK1025 for vented discs.

The pins also fit the Austin 1100/1300 ...

Now made in stainless steel to reduce heat transfer to caliper fluid and for longevity. Fits 997/998 calipers only. 2 per caliper

Genuine Lockheed seal repair kit. Minis from 1984 on with 8.4" discs plus.

This rebuild kit also fits the Midget/Sprite 1098/1275cc front disc brake calipers. The kit includes all the large seals needed to do both pistons in one caliper exce...

When it comes to safety critical parts, only fit the original suppliers' parts as repair kits. The kit includes all the seals needed to do 4 pistons in one caliper.If you are fortunate enough to have 4 pot calipers from the Turbo/Metro on your Mini, ...

Genuine AP lockheed seal Rebuild kit for Cooper 997/998cc brake calipers.

When it comes to safety critical parts, only fit the original suppliers parts as repair kits. The kit includes all the seals needed to do both pistons in one caliper.

Genuine Lockheed seal rebuild kit for Cooper S brake calipers. One kit needed per caliper. When it comes to safety critical parts, only fit the original suppliers' parts as repair kits. The kit includes all the seals needed to do both pistons in one ...

This is the repair kit for GMC167. This square plastic canister (reservoir) type brake master cylinder had separate circuits for diagonal split brakes; it's recognised by the rectangular reservoir and small cap with a failure switch on t...

Stainless steel 2" diameter caliper piston for 8.4" disc standard mini calipers.

Made in stainless steel to reduce heat transfer to caliper fluid and for longevity.

Road use pads but for performance use C-AHT223GREEN these are original size 2.375" which fit later 997 cooper- but if you have the very early small pad type, 2.125" wide for 997cc less split pin holes, these are nearly obsolete you can g...

For use on 8.4" wide standard brake disc calipers, 2.920"wide.

This is the Ultimax upgrade which produces less brake dust which destroys alloy wheels. For the upgraded version of this see C-AHT16GREEN.

A set of split pins are availa...

A great street upgrade for 4 pot calipers giving off less brake dust and better efficiency.A set of split pins and metal retaining clips are available as GBK1025

Our favourite pads as the give less brake pad dust which destroys alloy wheels.

Very durable and great for most road usage. The green upgrade for fast street is C-8G8995GREEN.

the finest brake pad available for mini 8.4" discs or Sprite/Midget cars.

These are for all forms of competition road use.

A set of split pins are available as GBK1010 or with metal retaining clips as GBK1026

For Cooper S 7.5" wide discs these are our favourite road brake pads as the reduce contamination on alloy wheels by virtue of less brake pad dust, plus they work well with good anti fade properties.

12" wheel to 10" wheel running gear conversion kit. Less wheels.

This kit will convert your 8.4 disc set up to the Cooper S 7.5 discs to allow fitment of 10" wheels, kit includes discs, calipers, kevlar pads with split pins and drive flanges...

Genuine Mini Spares version of the L/H AP caliper as produced by us years ago when not available from AP. Whether you are upgrading from the smaller 997/998 discs to the larger 'S' brakes or simply restoring a Cooper S, you'll appreciate the value o...

Genuine Mini Spares version of the R/H AP caliper as produced by us years ago when not available from AP. Whether you are upgrading from the smaller 997/998 discs to the larger 'S' brakes or simply restoring a Cooper S, you'll appreciate the value of...