LSD RAMP 45/45 RALLY FOREST
TRAN0004A

($53.82) £53.82 exc vat

($64.58) £64.58 inc vat

In stockIn stock
The 45/45 is best for forest and rallying in general but if on tarmac a rally diff with a different ramp 45/90 TRAN0004 can be made to special order, the road diff is good for tarmac also.

($53.82) £53.82 exc vat

($64.58) £64.58 inc vat

In stockIn stock

Recommended usage 1 x TRAN0004A to fit one mini.

People also bought products
CROWNWHEEL & PINION 4.2 S/C FOR LIMITED SLIP DIFF ...
C-BTA1249EVO

New Minispares Evolution straight cut crownwheel and pinion set 4.2. The crownwheel in these kits has a 20% wider gear than previously supplied, and a pinion made from Aero quality steel making it 20% tougher.15x63 teeth count

Always Check w...

($247.50) £247.50 exc vat

($297.00) £297.00 inc vat
LSD OUTPUT SHAFT RETAINING WASHER
C-BTA1243

Hardened flat washer to be used with flange type LSD Hardy Spicer C-BTA1262 outputs.

($2.24) £2.24 exc vat

($2.69) £2.69 inc vat
LSD DIFFERENTIAL EVOLUTION 50/90 ROAD
C-AJJ3387B

Minispares own Evolution limited slip diff with over 10 years success General spec and design is the same as C-AJJ3387 but has a 55/90 ramp type. The steeper 55 degree acceleration ramp reduces the percentage of torque biased to the ...

($500.93) £500.93 exc vat

($601.12) £601.12 inc vat
LSD RAMP 50/90 ROAD
TRAN0005

Internal ramp for our Evolution LSD unit for road

($54.00) £54.00 exc vat

($64.80) £64.80 inc vat
DIFF SHIM 6 THOU
DAM3108

You will need to shim up your diff bearings with these washers as required. See workshop manuals for details. See also DAM3109 & DAM3633.

($0.79) £0.79 exc vat

($0.95) £0.95 inc vat
DIFF SHIM 10 THOU
DAM3109

See also DAM3108.

($0.83) £0.83 exc vat

($1.00) £1.00 inc vat
LSD OUTPUT SHAFT - POT JOINT TYPE
C-BTA1263

Outputs for LSD when using inboard CV joints. Sold single with 2 needed per car.

($60.50) £60.50 exc vat

($72.60) £72.60 inc vat
REVERSE LIGHT SWITCH REMOTE TYPE
GAE131

Genuine Mini Spares product, fits 3 and 4-synchro gearboxes except for rod change types which use GAE191. This switch replaces the plug on the front of the remote-shift transmission case. It is triggered internally by the shift linkage w...

($25.00) £25.00 exc vat

($30.00) £30.00 inc vat
PHILIDAS NUT FOR 22A1139 OUTPUT SHAFT BOLT HARDY S...
GFK3431

Special height locking type nut for the hardy spicer joints on Cooper S and automatics to fit the 22A1139 bolt. Sorry about the price but only available from Philidas Ltd.

($0.84) £0.84 exc vat

($1.01) £1.01 inc vat
COMPETITION STEEL BAULK RING
C-22A1741

Mini Spares Performance Baulk ring.

The standard sintered baulk (synchro) rings are not tough enough for the demands of performance useage, in many instances lasting only one race before failure or breakage. The main reason is the incompat...

($35.36) £35.36 exc vat

($42.43) £42.43 inc vat
GASKET DIFF UPPER
2A3505B

The upper differential housing gasket for all minis. The lower gasket for rod change gearboxes is 22G1836 and for remote use 2A3506B.

($0.25) £0.25 exc vat

($0.30) £0.30 inc vat
GEARBOX DIFF SIDE PLATE GASKET
22A1611

Gearbox output shaft housing gasket for all minis except auto.

Sold singly 2 required per gearbox.

($0.41) £0.41 exc vat

($0.49) £0.49 inc vat
COPPER SUMP PLUG AND BLOCK WASHER
AED172

Mini Copper Sump Drain Plug Washer, also will fit the oil transfer pipe block fitting on Pre 1992 Blocks.

($0.79) £0.79 exc vat

($0.95) £0.95 inc vat
GEARBOX DIFF SIDE PLATE GASKET GENUINE MINISPARES
GUG705567GM

Try these GENUINE MINISPARES superseal gearbox output shaft gaskets specially made to try and eliminate leaks.

Sold singly,2 per gearbox

($2.03) £2.03 exc vat

($2.44) £2.44 inc vat
GEAR LEVER KNOB MK I & II MINI
22G110

Reproductions of the original black knob with engraved white shift pattern, complete with anti-vibration rubber insert.

($9.33) £9.33 exc vat

($11.20) £11.20 inc vat
GEAR BOX DIFFERENTIAL PINION LOCKTAB
DAM6140

Gearbox differential pinion locktab to secure it on the mainshaft for all manual gearboxes.

($2.20) £2.20 exc vat

($2.64) £2.64 inc vat
GASKET LOWER DIFF CASE HOUSING - ROD CHANGE
22G1836

Lower gasket for the differential housing gasket for all rod change gearboxes, the upper is 2A3505B. Remote and magic wand gearbox lower gasket is 2A3506B.

($0.38) £0.38 exc vat

($0.46) £0.46 inc vat
GEARBOX SPEEDO HOUSING FRONT COVER GASKET
22A541B

Gearbox gasket for the large alloy end cover which also houses the speedo drive pinion for all years of mini. The small gasket on the alloy housing with 2 bolt holes is GUG705564GM and the small pear shaped speedo housing gasket is [link...

($0.70) £0.70 exc vat

($0.84) £0.84 inc vat