GASKET SPEEDO HOUSING INSPECTION GASKET
GUG705564GM

£0.48 exc vat

£0.58 inc vat

In stockIn stock
for the inspection plate on the front cover of the transmission where the speed cable goes to -it has 2 bolt holes cut out

£0.48 exc vat

£0.58 inc vat

In stockIn stock

Recommended usage 1 x GUG705564GM to fit one mini.
Gearbox Transmission - Qty 1
Gearbox Transmission Case 2 - Qty 1

Recommended products

Until the Verto/injection type cars most minis had a small inspection hole for checking timing at the top of the clutch housing. These 1/4"unf bolts 1/2" long hold on that plate but you can use shorter type SH604031 also.

Also ...

Kit products

Minispares centre own reconditioned helical gearbox with all new ball bearings

throughout except under 1st, 2/3rd gear which are usually okay and very expensive, performance layshaft, special oil pick up pipe, diff pin etc.3.1 diff fitted. ...

Mini Spares Close ratio Evolution five speed "A" Plus Rod-change helical cut teeth gearbox has been in production since 1993 with phenomenal proven reliability. Do not use a quick shift gear lever with this gearbox

Suitable for 1275-1380cc(e...

Minispares centre own reconditioned helical tranny with all new ball bearings

throughout except under 2/3rd gear which are usually okay and very expensive, performance layshaft,special oil pick up pipe,diff pin etc.2.9-1 diff fitted .any fa...

Best of both worlds - acceleration and easy cruising - with this Mini Spares Evolution five speed "closer ratio gearbox and cross pin diff".

Mini Spares Close ratio Evolution five speed "A" Plus Rod-change helical cut teeth gearbox has bee...

New for 2023, special heavy duty 2nd and 3rd gears with laygear and 1st motion to match giving a quiet road box suitable for engines producing upto 125lbft of torque on naturally aspirated engines.



Ratios are:



1s...

Minispares centre own reconditioned helical tranny with all new ball bearings

throughout except under 1st, 2/3rd gear which are usually okay and very expensive, performance layshaft, special oil pick up pipe, diff pin etc.3.2 diff fitted .an...

Minispares centre own reconditioned helical tranny with all new ball bearings

throughout except under 1st,2/3rd gear which are usually okay and very expensive, performance layshaft,special oil pick up pipe,diff pin etc.3.4 diff fitted .any ...

Minispares centre own reconditioned helical tranny with all new ball bearings

throughout except under 1st,2/3rd gear which are usually okay and very expensive, performance layshaft,special oil pick up pipe,diff pin etc.3.1 diff fitted. Any ...

This gearbox is identical to MSG05 except for a 3.2 final drive which effectively gives you a final drive ratio of 2.82 in 5th.

Do not come with input gear supplied.

Surcgharge on old unit £400+ VAT

This gearbox is identical to MSG04 except for a 3.2 final drive which effectively gives you a final drive ratio of 2.822 in 5th.

Does not come with input gear supplied.

Mini Spares 'Straight Cut Close Ratio 4-Speed gearboxes'



Mini Spares are proud to offer a new range of straight cut, 4-speed rod change gearboxes.



These gearboxes undergo a full rebuild, using new; bearings, sea...

Mini Spares 'Straight Cut Close Ratio 4-Speed gearboxes'



Mini Spares are proud to offer a new range of straight cut, 4-speed rod change gearboxes.



These gearboxes undergo a full rebuild, using new; bearings, sea...

This gearbox is identical to MSG05 except for a 3.1 final drive which effectively gives you a final drive ratio of 2.73 in 5th.

Does not come with input gear supplied.

Minispares centre own reconditioned helical gearbox with all new ball bearings

throughout except under 2/3rd gear which are usually okay and very expensive, performance layshaft, special oil pick up pipe, diff pin etc. 2.7-1 diff fitted as ...

Mini Spares 'Straight Cut Close Ratio 4-Speed gearboxes'



Mini Spares are proud to offer a new range of straight cut, 4-speed rod change gearboxes.



These gearboxes undergo a full rebuild, using new; bearings, sea...

Minispares centre own reconditioned helical tranny with all new ball bearings

throughout except under 1st,2/3rd gear which are usually okay and very expensive, performance layshaft,special oil pick up pipe,diff pin etc.3.4 diff fitted .any ...

This gearbox is identical to MSG04 except for a 3.1 final drive which effectively gives you a final drive ratio of 2.73 in 5th.

Do not come with input gear supplied.

Minispares centre own reconditioned helical tranny with all new ball bearings

throughout except under 2/3rd gear which are usually okay and very expensive, performance layshaft, special oil pick up pipe, diff pin etc. 2.7-1 diff fitted as p...

Mini Spares Close ratio Evolution five speed "A" Plus Rod-change helical cut teeth gearbox has been in production since 1993 with phenomenal proven reliability. Do not use a quick shift gear lever with this gearbox

Suitable for 1275-1380cc(e...

New for 2023, special heavy duty 2nd and 3rd gears with laygear and 1st motion to match giving a quiet road box suitable for engines producing upto 125lbft of torque on naturally aspirated engines.



Ratios are:



1s...

New for 2023, special heavy duty 2nd and 3rd gears with laygear and 1st motion to match giving a quiet road box suitable for engines producing upto 125lbft of torque on naturally aspirated engines.



Ratios are:



1s...

New for 2023, special heavy duty 2nd and 3rd gears with laygear and 1st motion to match giving a quiet road box suitable for engines producing upto 125lbft of torque on naturally aspirated engines.



Ratios are:



1s...

New for 2023, special heavy duty 2nd and 3rd gears with laygear and 1st motion to match giving a quiet road box suitable for engines producing upto 125lbft of torque on naturally aspirated engines.



Ratios are:



1s...

New for 2023, special heavy duty 2nd and 3rd gears with laygear and 1st motion to match giving a quiet road box suitable for engines producing upto 125lbft of torque on naturally aspirated engines.



Ratios are:



1s...

Close ratio 4 speed helical gearbox using our C-STN48 gear kit.

1st gear ratio 2.583

2nd gear 1.644

3rd gera 1.250

New for 2023, special heavy duty 2nd and 3rd gears with laygear and 1st motion to match giving a quiet road box suitable for engines producing upto 125lbft of torque on naturally aspirated engines.



Ratios are:



1s...

New for 2023, special heavy duty 2nd and 3rd gears with laygear and 1st motion to match giving a quiet road box suitable for engines producing upto 125lbft of torque on naturally aspirated engines.



Ratios are:



1s...

People also bought products

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.



Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

The gasket with the oil suction seal hole fits every mini gearbox case and the other two are for the different case shapes, one for 3 synchro case and one for 4 synchro gearbox case, so choose the one you require. For latest spec Klinger gasket set u...

Genuine gearbox gasket for the large alloy end cover which also houses the speedo drive pinion for all years of mini. The small gasket on the alloy housing with 2 bolt holes is GUG705564GM and the small pear shaped speedo housing gasket ...

Genuine Mini Spares green and black upgraded Klinger gasket set. 3 pieces



Has the extra front gasket required for 3 synchro case use

Lower differential housing paper gasket for old magic wand and remote type gearboxes, rod change gearboxes.

Gearbox oil strainer to gearbox internal case gasket and also used on the C-AHT54 special oil pick up pipe. One also sits on the outer plate held onto the gearbox outer casing by 2 screws.

Mini Spares own Gearbox gasket set for all manual Mini transmissions. It does not include the clutch oil seal 13H2934 or output shaft seals ADU5738 or 13H577 selector shaft seal for pre rod change gearbox becaus...

The upper differential housing gasket for all minis. The lower gasket for rod change gearboxes is 22G1836 and for remote use 2A3506B.

Gearbox output shaft housing gasket for all minis except auto.

Sold singly 2 required per gearbox.

Genuine gearbox oil strainer to gearbox internal case gasket and also used on the C-AHT54 special oil pick up pipe. One also sits on the outer plate held onto the gearbox outer casing by 2 screws.

Gearbox gasket for the large alloy end cover which also houses the speedo drive pinion for all years of mini. The small gasket on the alloy housing with 2 bolt holes is GUG705564GM and the small pear shaped speedo housing gasket is [link...

Upgraded Viton version of ADU5738. Drive shaft oil seal or diff output shaft oil seal for all Mini's except Cooper S and early Automatics. 2 required per gearbox.

Originally developed by Rover to cut down on warranty hourly costs on powertrain warranty repairs, by their main dealers.-Labour time allowed at Rover dealers for fitting this seal was 3.4 hours labour rate.

This is a special rigid seal and ...

Actually the concertina dust cover for the rod change oil seal to prevent road debris attacking the seal. See MSSK050 kit when undertaking this job.

This is the large clutch case gasket that is made to a special thickness.

Many companies who copy these gaskets are not aware that the gasket thickness and consistency is important as it affects the clearance on the idler gear shimming. This...

Probably the most used jointing compound used by mini owners for nearly every gasket except the cylinder head. Some late minis used a silicone jointing compound instead of gaskets on the differential, see GAC8000.

Often overlooked when doing gearbox rebuilds this seal is very important as it sits in the very bottom of the case and is the source of irritating oil leaks.

The large round metal plug in the bottom of the gearbox is the pivot pin for all th...

Mini Copper Sump Drain Plug Washer, also will fit the oil transfer pipe block fitting on Pre 1992 Blocks.