SPINDLE KIT HIF38
WZX1126

($30.44) £30.44 exc vat

($36.53) £36.53 inc vat

In stockIn stock
spindle and parts only required to refurb your HIF38 carb- for butterfly see

WZX1387

($30.44) £30.44 exc vat

($36.53) £36.53 inc vat

In stockIn stock

Recommended usage 1 x WZX1126 to fit one mini.
HIF38 Carburettor 38mm 1.5 inch - Qty 1
Carburettor HIF38 and HIF44 - Qty 1

People also bought products
CARB REBUILD KIT FOR HIF44 TURBO CARB
CRK269

complete rebuild kit for Turbo type HIF44 carbs including needle valve and throttle spindle plus disc.With damper clamp ring as fitted to turbo only

($87.11) £87.11 exc vat

($104.53) £104.53 inc vat
CARB HIF38/44 ABUTMENT BRACKET
CAM4942

Metal bracket that fits between the manifold and the HIF44 (1.75")carb to hold the cable - the choke cable clip for this bracket is CZK6491. Also for HIF38. For HS4 carb see 12G766 bracket. Original Turbo type [...

($11.93) £11.93 exc vat

($14.32) £14.32 inc vat
CARB BUTTERFLY ANTISTALL HS4 WAXSTAT JET TYPE
WZX1324

plain butterfly with small hole at bottom for HS4 waxstat jet type carb and uses WZX177 spindle-or see kit full rebuild kit CRK121. This is usually fitted to FZX3013 replacement carb --same size butterfly on all...

($17.24) £17.24 exc vat

($20.69) £20.69 inc vat
JET ASSY HIF38 1275cc
WZX1455A

jet for HIF38 carb and is 0.090 size--for HIF44 see WZX1453A

($16.97) £16.97 exc vat

($20.36) £20.36 inc vat
FLOAT NEEDLE/SEAT FOR HIF38/44 LARGER TYPE VALVE
WZX1099A

Fitted to HIF38 and HIF44 carbs, ethanol tolerant product. Bigger bodied valve.

For turbo models see WZX1095 .Quantity required-1

($20.43) £20.43 exc vat

($24.52) £24.52 inc vat
SPINDLE KIT HS4 1.5"
WZX1177

throttle spindle kit for single HS4 type carbs-.Quantity required-1 kit. -the butterfly is available seperately as WZX1323 for plain-WXZ1325 with air valve

($13.50) £13.50 exc vat

($16.20) £16.20 inc vat
FLOAT REP KIT for HIF CARBS
WZX1509A

This float is ethanol tolerant and will fit all HIF38/44 carbs and the spindle is CUD2082 ..Quantity required-1 set for single carb.

Turbo uses WZX1095 needle valve. An expensive puncture proof stay up float is av...

($43.25) £43.25 exc vat

($51.90) £51.90 inc vat
BEARING AND NEEDLE JET HIF
WZX1441

bearing and needle jet kit(not carb needle) for both HIF38 and HIF44.

.Quantity required for single carb-1 set.

($16.64) £16.64 exc vat

($19.97) £19.97 inc vat
CARB BUTTERFLY HIF38 DISC KIT
WZX1387

Plain butterfly disc kit for the HIF38 carb,which we sometimes order in in as requested by the customer as they are very slow selling--same size butterfly on all 1.5" carbs

($14.40) £14.40 exc vat

($17.28) £17.28 inc vat
CARB HIF38 SERVICE KIT
CSK94

Service repair kit for the HIF38 carb (1.5") fitted to the first 1275 engined cars in 1990s such as the sprite.

($63.02) £63.02 exc vat

($75.62) £75.62 inc vat
15" BRAIDED PETROL PIPE 1/4" BORE
PPK6

Before the days of Aeroquip, Minis were fitted with braided steel rubber fuel lines. They should be used in place of rubber for all fuel lines in the engine compartment. They come made to length, with rubber end caps. 1/4" bore size.

Orange ...

($4.24) £4.24 exc vat

($5.09) £5.09 inc vat
HIF GASKET AND SEAL KIT
WZX1505A

Gaskets and spindle/float lid seals for all the HIF38/44 range.

For HIF38 service kit see CSK94 for mini and CSK78 for metro

for HIF44 see CSK75[/lonk] except turbo

[link]CRK167 rebui...

($14.81) £14.81 exc vat

($17.77) £17.77 inc vat
ACCELERATOR CABLE NYLON SLEEVED EXTRA LONG
C-AHT85

Our heavy duty throttle cable is superior in many ways.

A nylon interior ensures smooth operation. The outer cable is 32mm longer and inner is 95mm longer than the standard one.

Cable to carb bolt is ACC5062.

($6.10) £6.10 exc vat

($7.32) £7.32 inc vat
HEATER AND CHOKE CABLE CLIP HIF CARB
CZK6491

Clip on the heater valve for heater cables on vehicles from 1990 where the in line remote heater valve was used. It has also been used as a clip for HIF carbs to hold the cable but the one from Rover is 13H3472.

($1.35) £1.35 exc vat

($1.62) £1.62 inc vat
NEEDLE AAM SWINGING - STAGE ONE 1275cc 1.5" CARB
CUD1011

($8.25) £8.25 exc vat

($9.90) £9.90 inc vat
CARB DASHPOT OIL FOR SU RANGE
BDR125

Correct and original thickness oil for SU carb dashpots.

($7.43) £7.43 exc vat

($8.92) £8.92 inc vat
DASHPOT DAMPER HIF38
LZX1511

This dashpot carb damper is for the HIF38 1.5"SU as fitted on original 1990s 1275 minis except Coopers with HIF44 carb, but was also used on some Metro HIF44 carbs. check the number on your old one.

($23.52) £23.52 exc vat

($28.22) £28.22 inc vat
CARB SPRING HIF GREEN 12oz)
JZX1088

FITS BOTH HIF38/44

($9.41) £9.41 exc vat

($11.29) £11.29 inc vat
CARBURETTOR LEVER PIN
ACC5062

Pin to hold the accelerator cable which locates in the carb bracket lever. Supplied as originally fitted with washers, nut and split pin plus a proper machined hole for the cable unlike many others on the market- which come either bare or with wrong ...

($2.93) £2.93 exc vat

($3.52) £3.52 inc vat
FLOAT LID SEAL FOR HIF CARB
AUD3588A

Seal for the HIF38/44 float lid chamber

($1.95) £1.95 exc vat

($2.34) £2.34 inc vat