SPINDLE KIT HS6
WZX1178

($13.50) £13.50 exc vat

($16.20) £16.20 inc vat

Out of stockOut of stock
Not fitted as standard to the A seriers it found its way on engines as a great tuning aid on tuned engines. this is the spindle only and the disc is WZX1321.We suggest you use a complete rebuild kit if this area has worn-CRK223 which will have to be ...

($13.50) £13.50 exc vat

($16.20) £16.20 inc vat

Out of stockOut of stock

People also bought products
VITON TIPPED FLOAT NEEDLE VALVE FOR HS CARBS
VZX1100

This is the original type of needle valve that governs the plastic fuel float in your SU carb.

An alternative better upgraded version is available as CA90.

($9.75) £9.75 exc vat

($11.70) £11.70 inc vat
GENUINE SU HS STAYUP FLOAT KIT
WZX1304

The new adjustable height StayUp® Float is resistant to modern ethanol based Fuels and has a military spec closed cell construction making it puncture proof. The ability to adjust the Float Arm allows for quick and easy minor alterations to Float lev...

($19.60) £19.60 exc vat

($23.52) £23.52 inc vat
JET ASSEMBLY R/H TWIN HS4
AUD9102

Also denoted by its black plastic base. Twin HS4 carbs have 30 degree float bowl angles and therefore this jet is easier to fit as it is longer. L/H carb uses AUD9098A std single HS2 jet.



For...

($11.25) £11.25 exc vat

($13.50) £13.50 inc vat
LEVER FOR LINKAGE 001
HAR002

($2.05) £2.05 exc vat

($2.46) £2.46 inc vat
ANCHOR TAG ON CARB
12A4

($0.66) £0.66 exc vat

($0.79) £0.79 inc vat
METAL ball joint FOR LINKAGE001 KIT
CSA008

($4.68) £4.68 exc vat

($5.62) £5.62 inc vat
CARB HIF38/44 ABUTMENT BRACKET
CAM4942

Metal bracket that fits between the manifold and the HIF44 (1.75")carb to hold the cable - the choke cable clip for this bracket is CZK6491. Also for HIF38. For HS4 carb see 12G766 bracket. Original Turbo type [...

($11.93) £11.93 exc vat

($14.32) £14.32 inc vat
CARB BUTTERFLY KIT 1.5"
WZX1323

this is the plain butterfly disc for the HS4 1.5" carb and if you have the air valve type butterfly disc see WZX1325

($14.81) £14.81 exc vat

($17.77) £17.77 inc vat
SPINDLE KIT HS4 1.5"
WZX1177

throttle spindle kit for single HS4 type carbs-.Quantity required-1 kit. -the butterfly is available seperately as WZX1323 for plain-WXZ1325 with air valve

($13.50) £13.50 exc vat

($16.20) £16.20 inc vat
FLOAT REP KIT for HIF CARBS
WZX1509A

This float is ethanol tolerant and will fit all HIF38/44 carbs and the spindle is CUD2082 ..Quantity required-1 set for single carb.

Turbo uses WZX1095 needle valve. An expensive puncture proof stay up float is av...

($43.25) £43.25 exc vat

($51.90) £51.90 inc vat
CARB SPINDLE KIT 1.1/4" HS2
WZX1310

spindle and fixings only for the HS2 carb-the butterfly for this is WZX1320.

sorry folks but buying both kits you get double the gaskets

($11.70) £11.70 exc vat

($14.04) £14.04 inc vat
BEARING AND NEEDLE JET HIF
WZX1441

bearing and needle jet kit(not carb needle) for both HIF38 and HIF44.

.Quantity required for single carb-1 set.

($16.64) £16.64 exc vat

($19.97) £19.97 inc vat
STUD HS4/HIF CARB + some 12G103 HOUSING (5/16")
CHS2514

Universal stud made for fitting the HS4/HIF carb to the manifold (except HS6 with alloy spacer on cast one piece manifold which requires CHS2515 (5.8mm longer)) and it also fits the cylinder head to take the thermostat housi...

($0.78) £0.78 exc vat

($0.94) £0.94 inc vat
PETROL PIPE HOSE 1 METRE
PETROLPIPE

Special rubber hose 1/4" bore for use on petrol lines, this is in black and not armour plated outside but does have internal reinforcing. Supplied as pre cut 1m length with 2 clips and is safe to use with modern fuels with higher ethanol content. SAE...

($3.27) £3.27 exc vat

($3.92) £3.92 inc vat
NEEDLE BFY SWINGING TYPE - HIF44 COOPER 90 on
NZX8071

Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement. They start with part number prefix CUD for HS type carbs--NZX for HIF carbs--the earlier H and HS type were fixed sol...

($8.25) £8.25 exc vat

($9.90) £9.90 inc vat
NEEDLE BDK SWINGING - HIF6
NZX8010

Spring loaded needle for the HIF44 carb.

($8.25) £8.25 exc vat

($9.90) £9.90 inc vat
NEEDLE BDL SWINGING - 1300 HIF44 & KN ELEMENT
NZX8011

Swinging type needle, usefull for 256 degree duration camshaft with standard filter, see BDK NZX8010 for K&N filter.

($8.25) £8.25 exc vat

($9.90) £9.90 inc vat
FLOAT NEEDLE VALVE HS2/4/6 (VITON TIPPED)
WZX1100A

This is the original type of needle valve that governs the plastic fuel float in your SU carb.

An alternative better upgraded version is available as CA90.

($10.38) £10.38 exc vat

($12.46) £12.46 inc vat
HS2 JET BEARING KIT.FIXED
WZX1341

This kit for the HS2 type carb includes the fixed needle type bearing jet(sleeve)the adjusting nut,spring and locknut where you adjust your carbs.

.Quantity required for single carb-1 set or for twin carbs 2 sets required

($13.50) £13.50 exc vat

($16.20) £16.20 inc vat
ACCELERATOR CABLE NYLON SLEEVED EXTRA LONG
C-AHT85

Our heavy duty throttle cable is superior in many ways.

A nylon interior ensures smooth operation. The outer cable is 32mm longer and inner is 95mm longer than the standard one.

Cable to carb bolt is ACC5062.

($6.10) £6.10 exc vat

($7.32) £7.32 inc vat