Not included with any brake pads these days owing to universal usage these

pins and retainer clips should always be changed when fitting new pads.

For vehicles with 8.4" discs and standard 2 pot calipers,1984 onwards.

Genuine Mini Spares R/H caliper for 8.4" disc set ups remanufactured exclusively for Minispares. Lots of alternatives on the market but AP no longer make the originals but as their largest agent for Mini these are our own and fully tested.

C...

UK made 8.4" brake disc. Priced individually but should always be replaced in pairs for safety and braking efficiency. These are the best quality available of the low priced brake discs on the market and suitable for all standard road use.Beware of t...

This is the small oil seal used on all Mini Spares 4 pot caliper and also the spacers fitted between Minispares 4 pot alloy when vented discs are fitted. They are supplied in the C-AJJ4021 kit to fit to our calipers when vented discs are...

High tensile 3/8" bolt 1.3125" long, to hold the standard calipers to the hub on disc brake models. Correct length shank and material. T grade 62 ton rating with vickers 287 reading-25-32 rockwell. The ERA turbo used Metro 4 pot calipers and used spe...

NICKEL copper easy bend brake pipe with 2 metric male unions. 22"long, for 1988 on master cylinder lower outlet to PDWA valve outlet nearest to wing-other pipe is HMK026-both for left or right hand drive.

These pipes are retail...

For use on 8.4" wide standard brake disc calipers, 2.920"wide.

This is the Ultimax upgrade which produces less brake dust which destroys alloy wheels. For the upgraded version of this see C-AHT16GREEN.

A set of split pins are availa...

the finest brake pad available for mini 8.4" discs or Sprite/Midget cars.

These are for all forms of competition road use.

A set of split pins are available as GBK1010 or with metal retaining clips as GBK1026

12" wheel to 10" wheel running gear conversion kit. Less wheels.

This kit will convert your 8.4 disc set up to the Cooper S 7.5 discs to allow fitment of 10" wheels, kit includes discs, calipers, kevlar pads with split pins and drive flanges...

BRIDGING BOLTS AND SEAL FOR BETWEEN THE TWO CALIPER HALVES ON 7.5" COOPER S CALIPERS. Should be torqued to 37/38Nm.

Non genuine pair of L/H disc shield covers for the 8.4" disc size. Fitted as standard from 1984 to 2000. Non genuine but all that is available. It comes complete with the little locating bracket. If you require just the bracket, order it separately ...