CARB HS4 SPINDLE REPAIR BUSH

AUD3080

£3.71 exc vat

£4.45 inc vat

In stock

Worn throttle spindles cause erratic performance from your carb and sometimes the housing gets worn--These are the bushes to repair worn carbs when replacing spindles for HS4 carbs. As a guideline 0.3125" internal diameter ream body to 9.55mm.

£3.71 exc vat

£4.45 inc vat

In stock

Recommended usage 2 x AUD3080 to fit one mini.

Twin HS4 Carburettor - Qty 2

Carburettor HS4 - Qty 2

Carburettors HS4 - Qty 2

People also bought products

GENUINE SU HS STAYUP FLOAT KIT

WZX1304

The new adjustable height StayUp® Float is resistant to modern ethanol based Fuels and has a military spec closed cell construction making it puncture proof. The ability to adjust the Float Arm allows for quick and easy minor alterations to Float lev...

£19.60 exc vat

£23.52 inc vat

SPINDLE KIT HIF44-EARLY METRO

WZX1127

spindle and fixings only for HIF44, only with one end threaded as opposed to WZX1128 which is threaded both ends-see WZX1183 for disc

£19.61 exc vat

£23.53 inc vat

FLOAT NEEDLE/SEAT FOR HIF38/44 LARGER TYPE VALVE

WZX1099A

Fitted to HIF38 and HIF44 carbs, ethanol tolerant product. Bigger bodied valve.

For turbo models see WZX1095 .Quantity required-1

£20.43 exc vat

£24.52 inc vat

SPINDLE KIT HS4 1.5"

WZX1177

throttle spindle kit for single HS4 type carbs-.Quantity required-1 kit. -the butterfly is available seperately as WZX1323 for plain-WXZ1325 with air valve

£13.50 exc vat

£16.20 inc vat

SPINDLE KIT HIF44

WZX1128

spindle threaded both ends for HIF44 for most late carbs--see WZ1127 for spindle with thread one end only as per early metro cars. Thread size is 1/4 BSF

£43.59 exc vat

£52.31 inc vat

CARB SPINDLE KIT 1.1/4" HS2

WZX1310

spindle and fixings only for the HS2 carb-the butterfly for this is WZX1320.

sorry folks but buying both kits you get double the gaskets

£11.70 exc vat

£14.04 inc vat

HIF44 JET ASSEMBLY

WZX1453A

jet assembly (0.100") for the HIF44 carb only- see MGM10008 for HIF38(0.090")

£25.76 exc vat

£30.91 inc vat

FLOAT NEEDLE VALVE HS2/4/6 (VITON TIPPED)

WZX1100A

This is the original type of needle valve that governs the plastic fuel float in your SU carb.

An alternative better upgraded version is available as CA90.

£10.38 exc vat

£12.46 inc vat

HIF BI-METAL STRIP

CUD2399

£20.48 exc vat

£24.58 inc vat

FLOAT SPINDLE HIF

CUD2082

spindle to hold the float to the float lid on the bottom of HIF carbs only.

the float is WZX1509A and needle valve is WZX1099A except turbo which is WZX1095

£4.93 exc vat

£5.92 inc vat

CARB JET TO FLOAT BOWL SEAL

AUD2194

The metal washer AUD2193 goes up against this seal on the jet where it enters the float bowl on all HS type carbs.

£1.01 exc vat

£1.21 inc vat

CARB SPRING (RED 4.5oz) HS TYPE CARBS

AUC4387

Standard spring for all HS2 and HS4 on minis except for the 997/998 Cooper from 1964-9 and H4 special tuning carbs which used AUC4587.

£7.59 exc vat

£9.11 inc vat

CHOKE CABLE TRUNNION ACH9042 NIPPLE & 53K3503 SCRE...

AUE34

Complete with screw the choke trunnion is used on nearly all SU carb linkages.

See ACC5062 for carb cable link trunnion also.

£2.03 exc vat

£2.44 inc vat

ORIGINAL BRASS TYPE CARB DASHPOT DAMPER

AUC8103HB

Early single HS" carbs had these splendid looking brass top dashpot dampers which are interchangeable with the plastic type.

£29.03 exc vat

£34.84 inc vat

BUTTERFLY SCREW

AUC1358

These screws fit all HS type carb butterflies to hold them on the throttle spindle

£0.90 exc vat

£1.08 inc vat

CARB HS2 SPINDLE REPAIR BUSH

AUD3079

Worn throttle spindles cause erratic performance from your carb and sometimes the housing gets worn--These are the bushes to repair worn carbs when replacing spindles for HS2 carbs. As a guidline 0.250" internal diameter and ream carb bo...

£4.16 exc vat

£4.99 inc vat

CARB FLOAT GROMMET 30° L/H FOR HS2/4 (orange)

AUC1316

Float grommet for the mini twin HS2/4 carbs---this 30 degree angle is for the L/H ( front) carb and is positioned to angle the float bowl--Used on both twin HS2/4 carbswhen using correct mini inlet manifolds- Midgets and MGB used different angles,u...

£10.19 exc vat

£12.23 inc vat

CARBURETTOR LEVER PIN

ACC5062

Pin to hold the accelerator cable which locates in the carb bracket lever. Supplied as originally fitted with washers, nut and split pin plus a proper machined hole for the cable unlike many others on the market- which come either bare or with wrong ...

£2.93 exc vat

£3.52 inc vat

FLOAT LID SEAL FOR HIF CARB