BRAKE PIPE CLIP FOR FRONT SUBFRAME
11K9181

£0.49 exc vat

£0.59 inc vat

In stockIn stock
The clip that holds the brake pipe which runs across the front of the front subframe. Also used on some later injection cars to keep the wiring safe for spotlamps.

£0.49 exc vat

£0.59 inc vat

In stockIn stock

Recommended usage 2 x 11K9181 to fit one mini.
Brake Pipes - Front to Rear - Qty 2
Brake Pipes - Front to Rear Split 1985 on - Qty 2
Spot and fog lamps - Qty 2

People also bought products
BRAKE PIPE FRONT BRIDGE BETWEEN CYLINDERS LH
21A1207

Pre brent steel brake pipe between the two wheel cylinders on the front drum brakes, LH side.

£9.60 exc vat

£11.52 inc vat
BRAKE PIPE FRONT BRIDGE BETWEEN CYLINDERS RH
21A1206

Pre brent steel brake pipe between the two wheel cylinders on the front drum brakes, RH side.

£9.60 exc vat

£11.52 inc vat
CLAMP PLATE FOR SERVO BRAKE PIPES COOPER 'S' & EA...
2H400

Clamp plate to hold servo brake pipes. Two required. Fitted to Cooper S and early 1275 GT. 1963 TO 1974.

£2.50 exc vat

£3.00 inc vat
SPEEDO CABLE TO BULKHEAD CLIP 59-82
5L90

Clip to retain the speedo cable to the bulkhead on pre 82 cars approx. This clip is also used to hold the loom to the inner wing on some cars.

£0.83 exc vat

£1.00 inc vat
ALUMINIUM BRAKE DRUM NON SPACERED PAIR
MINIFIN

Non spacered die cast alloy brake drums. The alloy material has a finned design that dissipates heat quicker which in turn helps reduce brake fade. Sold as a pair of drums.

£69.60 exc vat

£83.52 inc vat
HEEL BOARD PIPE TAG TAB
BMP1496

Clip on heelboard for pipes-2 fitted on all models until SPI 1991 onwards which had one onlyMS51heel board panel has 2 fitted and HMP441008 has one only.

£1.20 exc vat

£1.44 inc vat
FRONT FLOOR PAN CLIP FOR FUEL AND BRAKE PIPE TAB T...
ALA5527

Clip under front floor fitted to 1990 for holding fuel/ brake lines (2 per car)

located beside floor pan footwell and tunnel

£3.00 exc vat

£3.60 inc vat

now

£2.70 exc vat

£3.24 inc vat
UNDER FLOOR CLIP FOR FUEL AND BRAKE PIPE TAG TAB
ALA5536

Clip for underside of front floor(3 per side) 6 in total fitted to 90

£3.25 exc vat

£3.90 inc vat

now

£2.76 exc vat

£3.31 inc vat
BRAKE PIPE COPPER NICKEL WITH 2 10MM ENDS 22" LONG
HMK022

NICKEL copper easy bend brake pipe with 2 metric male unions. 22"long, for 1988 on master cylinder lower outlet to PDWA valve outlet nearest to wing-other pipe is HMK026-both for left or right hand drive.

These pipes are retail...

£9.89 exc vat

£11.87 inc vat
BRAKE PAD SPLIT PINS ONLY FOR VENTED CALIPERS (KIT...
GBK1011

4 pins supplied (clips are no longer available)

£0.80 exc vat

£0.96 inc vat
BRAKE PAD SPLIT PIN ONLY FOR VENTED CALIPERS
PS610242

Correct size and length brake pad pin for the caliper using 8.4" disc size and vented calipers.

£0.21 exc vat

£0.25 inc vat
BRAKE PAD SET 998 COOPER ULTIMAX
GBP102ULTIMAX

Road use pads but for performance use C-AHT223GREEN these are original size 2.375" which fit later 997 cooper- but if you have the very early small pad type, 2.125" wide for 997cc less split pin holes, these are nearly obsolete you can g...

£13.13 exc vat

£15.76 inc vat
CLIP FOR 14A8009 MOULDING
14A8010

Special clip for the lower brightwork moulding 14A8009 for finishing off the lower dash, crash pad rail, or on earlier cars the painted metal surface of the panel which holds the switch panel section.

The moulding 14A80...

£1.22 exc vat

£1.46 inc vat
BRAKE PADS 8.4 DISC ULTIMAX ROAD USE
GBP281ULTIMAX

For use on 8.4" wide standard brake disc calipers, 2.920"wide.

This is the Ultimax upgrade which produces less brake dust which destroys alloy wheels. For the upgraded version of this see C-AHT16GREEN.

A set of split pins are availa...

£28.05 exc vat

£33.66 inc vat
BRAKE PAD SET ULTIMAX STREET METRO 4 POT
GBP258ULTIMAX

A great street upgrade for 4 pot calipers giving off less brake dust and better efficiency.A set of split pins and metal retaining clips are available as GBK1025

£32.67 exc vat

£39.20 inc vat
BRAKE PAD SET ULTIMAX STREET 7.5 DISC
GBP103ULTIMAX

Our favourite pads as the give less brake pad dust which destroys alloy wheels.

Very durable and great for most road usage. The green upgrade for fast street is C-8G8995GREEN.

£28.16 exc vat

£33.79 inc vat
BRAKE PADS 8.4 DISC + SPRITE/MIDGET EBC GREEN SUFF
C-AHT16GREEN

the finest brake pad available for mini 8.4" discs or Sprite/Midget cars.

These are for all forms of competition road use.

A set of split pins are available as GBK1010 or with metal retaining clips as GBK1026

£30.75 exc vat

£36.90 inc vat
BRAKE PADS GREEN STUFF "S" PADS
C-8G8995GREEN

For Cooper S 7.5" wide discs these are our favourite road brake pads as the reduce contamination on alloy wheels by virtue of less brake pad dust, plus they work well with good anti fade properties.

£30.75 exc vat

£36.90 inc vat
BRAKE PADS GREEN STUFF FOR 4 POT CALIPERS
C-8G8994GREEN

For use with 4 pot calipers as per Metro or Minispares own alloy type these are our favourite road brake pads as the reduce contamination on alloy wheels by virtue of less brake pad dust, plus they work well with good anti fade properties. A set of s...

£37.50 exc vat

£45.00 inc vat
BRAKE CONVERSION TO MINISPARES 7.5" DISCS AS PER C...
C-AJJ4028MS

Cooper S 7.5" complete brake disc kit, except for disc shields, with Mini Spares own cast standard calipers. If you want or have 10" wheels this is the kit to convert from drum brakes to discs brakes.

This kit includes every nut bolt and co...

£439.36 exc vat

£527.23 inc vat