SHEAR BOLT STEERING LOCK (2 PER CAR)
51K4001

£3.36 exc vat

£4.03 inc vat

In stockIn stock
On all cars with a steering lock there are safety shear bolts on the column which will need replacing if removed. These are the bolts that hold the steering lock halves together.19mm (3/4") long. 2 required par car, but sold individually.

£3.36 exc vat

£4.03 inc vat

In stockIn stock

Recommended usage 2 x 51K4001 to fit one mini.
Steering Columns, Locks & Cowlings - Qty 2
Steering Wheels, Locks and Columns - Qty 2

People also bought products
ENGINE MOUNT BOLT KIT FOR ALL MANUAL TYPES
21A1902FK

Engine mount bolt kit for manual cars, 1 kit requried per car.

£3.83 exc vat

£4.60 inc vat
MINI BOOT CABLE FITTING KIT INCLUDING SPACERS
14A6740FK

£4.50 exc vat

£5.40 inc vat
PETROL TANK STRAP RETAINING BOLT
13H7583

5/16" UNF THREAD 2 1/2" LONG bolt commonly used for 21A2838 petrol tank strap

£0.59 exc vat

£0.71 inc vat
SETSCREW 5/16" UNF STAINLESS STEEL
GFK5185SS

Stainless steel version of GFK5185, worth keeping a few spare as they are one of the most common bolts fitted to the Mini.

£0.60 exc vat

£0.72 inc vat
SEAT BELT THREADED ANCHOR PLATE (65mm X 65mm)
681-4

FIA spec anchor plate for eye bolts, used when fitting harnesses. Sold individually, 7/16 UNF 65x65x3mm.

£1.60 exc vat

£1.92 inc vat
MACHINED SCREW FOR 8B12501METAL TO LENS M4x10
MSB2003

Screw for chrome metal number plate lamp on mk3 19790 on - You will have to drill the lens out to take M4 screw.

£0.10 exc vat

£0.12 inc vat
BOLT 5/16"UNC 1.75"LONG FOR CLUTCH HOUSING
DAM7759

Clutch housing bolt to engine long 5/16" UNC 1.75" long Fitted ffrom 1985 for clutch housing instead of 22A152 stud

£2.00 exc vat

£2.40 inc vat
SCREW FOR MK4 TYPE STEERING COLUMN COWL 7/8 LONG
AT606084

Screw for MK4 (1976) onwards BHM7085 plastic steering cowl, 2 required. Sold singly.

£0.40 exc vat

£0.48 inc vat
SCREW FOR DOOR LOCK MK3 SPECIAL CUTTING THREAD
ZCT410

Special thread cutting screw 1/4 UNF 1.25" (31mm) long.

Screw to hold the lock assembly on the door of MK3 cars with internal hinges and wind up windows. On new doors or for easy fitment use these special screws with cutting thread (3 sided ...

£0.92 exc vat

£1.10 inc vat
FLANGED BOLT 5/16" UNF 1.75" LONG. CLUTCH CASE TO ...
DAM7758

Clutch housing bolt to engine long 5/16" UNF 1.75" long with tuflock patch to secure. Earlier bolts less tuflock are {link]BH605141{/link}

£0.83 exc vat

£1.00 inc vat
STEERING COLUMN PEDALBOX BRACKET PLATE
21A2464

Retaining plate on steering column pre MPI.

£7.50 exc vat

£9.00 inc vat
SELF TAP SCREW No10 1" LONG
GFK2264

Self tap screw No10 for holding wiper motor strap to body and any other use.

£0.05 exc vat

£0.06 inc vat
CATALYST M10 BOLT METRIC FOR CAT FLANGE
FB110351

M10 metric flanged bolt 35mm long for catalytic converter. (4 required per unit)

£1.22 exc vat

£1.46 inc vat
SHEAR BOLT FOR STEERING LOCK FOR TWIN POINT MINI
51K4008

Shear bolt M8 metric thread 22mm (7/8")long

£2.25 exc vat

£2.70 inc vat
STEERING RACK SPACER - NON GENUINE
37H8064

Nylon bush for original C.A.M steering racks fitted by Leyland/Rover.

£4.71 exc vat

£5.65 inc vat
REMOTE HOUSING SHORT BOLT 3/8" x 1" UNC
GFK5240

Remote type gearboxes had four UNC bolts holding the long alloy housing to the differential case. These are the shorter two, 3/8"unc 1"long. The longer two are ZCS628.

Also the bolt to hold the starter motor.

Also the bolt for the [...

£0.32 exc vat

£0.38 inc vat
CLUTCH HOUSING TO BLOCK BOLT 1.75"x5/16"UNF
BH605141

There are 3 of these bolts fitted -1.75"long 5/16"UNF bolt ALTERNATIVE DAM7758.

Also used as longer bolt for water pump.

Also for the 21A1091 heavy duty tie rods on front suspension.

£0.25 exc vat

£0.30 inc vat
BOLT 5/16"X 1.5" UNC SETSCREW
GFK5235

£0.35 exc vat

£0.42 inc vat
BOLT 5/16" X 1" UNC SETSCREW
GFK5234

Bolt for CHM85 differential side cover. 1" long UNC useful for pre verto slave cylinder and starter bolt. Also 12A361 engine mounting bracket to alloy case.

£0.17 exc vat

£0.20 inc vat
SETSCREW 5/16" x 1" UNF
GFK5185

Front subframe to front teardrop mounting, clutch case to block.

Engine mounting to subframe - easier to use than the GFK5184 - 3/4" long

£0.21 exc vat

£0.25 inc vat