£315.00 exc vat
£378.00 inc vat
Out of stock
£315.00 exc vat
£378.00 inc vat
Out of stock
Front mounted radiators on the twin point use 2 of these on the upper fitting prongs as mounting rubbers. The lower bush is EAP8708
Front mounted radiators use this lower mounting for location and to stop vibration -Fitted to twin point injection cars only
All metal Radiator for all MPI 1996 on to replace the plastic header tank type that fractures and breaks. As available from Rover Xparts these radiators were fitted at the front to help quieten down the engine noise for the last homologation requirem...
This is the larger 5/16" unf that goes though the rear subframe mounting trunnion. Cars manufactured before 1976 require 4 of these, after 1976 require 6. Sold individually.
There are two of these bolts on hydrolastic front subframe towers to fix in place to the bulkhead. Fit dry suspension pre 1976 see 21A90. This bolt also holds the lower radiator bracket to the alloy casting on the gearbox when a 2 piece ...
MPI only. 3 YEAR GUARANTEE-UK made.Large impeller higher capacity water pump. Mini Spares procured product as original Rover Airtex tooling has been scrapped.
Fitted with a PPS, glass filled plastic impeller as used by Jaguar and Aston Marti...
3 YEAR GUARANTEE-UK made.Large impeller higher capacity water pump with top quality die cast body . Mini Spares procured product as the original superb Rover Airtex tooling has been scrapped.
Fitted with a PPS, glass filled plastic impeller...
Radiator hose kit for all mpi Minis. This kit has top and bottom radiator hoses all in shiney black Silicone that should last forever and not degrade with heat, time and environment. This kit is ideal for both the racer who never wants a failure or t...
Radiator hose kit for all mpi Minis. This kit has top and bottom radiator hoses all in shiney blue Silicone that should last forever and not degrade with heat, time and environment. This kit is ideal for both the racer who never wants a failure or th...
Unless your're heavily into the concours scene you'll love these hoses! These silcone hoses will withstand higher temps and pressures and will last virtually forever! Made to fit 1275cc cylinder head the length is made to cover 1275cc engines includi...
Black Silicon Bottom hose- Unless you're heavily into the concours scene you'll love these hoses! These silicone hoses will withstand higher temps and pressures and will last virtually forever! And if you ever had to replace a lower hose you'll appre...
Silicone heater hose, 39" for cars with the original heater valve bolted on the cylinder head.
Pre 1976 cars can use 2 0f these lengths, commonly known as 1/2" bore heater hose. also see C-GRH1007 for the longer 42" hose on 1976...
Heater Matrix take off fixing kit, cars only-fits on heater matrix to take the 2 heater pipes on L/H side of car.
kit includes 2 brass take off pipes with 2 stainless steel bases and 2 water seals.
The outlet pipes are made in brass...
Expansion tank for 1996 on cars with front mounted radiator. This is made in aluminium as the original is liable to break. The original threaded type plastic cap that would allow water to escape cannot be used, so a new rad cap is included. An overfl...
Front mounted radiators use this lower mounting for location and to stop vibration -Fitted to twin point injection cars only
At long last a screw on fitting radiator cap but it is only for the twin point injection cars from 1996 on. Actually fits the expansion tank on this model and originated from the the Mini Metro. This special cap is made to allow water /pressure to es...
All metal Radiator for all MPI 1996 on to replace the plastic header tank type that fractures and breaks. As available from Rover Xparts these radiators were fitted at the front to help quieten down the engine noise for the last homologation requirem...
Genuine water pump gasket, green one side and grey the other, grey side to the water pump.
Heater hoses and expansion tank hoses are mostly 5/8" from 1985 on so check the bore size as some were actually 1/2" hose with flared ends of 5/8" you will need to use a restrictor pipe MOC210.
Original 5/8" rover hoses were 1"(...
Expansion tank in plastic for Twin point injection cars with front fitting radiator only. Now Back in stock. Don't forget to check the special plastic cap GRC1184 is functioning correctly, it should allow water/pressure to escape from it...
The heater outlets exit on L/H and are horizontal for 5/8"hose fitting.
The outlets for this mod come seperately, as part number JEP10008.
Front mounted radiators on the twin point use 2 of these on the upper fitting prongs as mounting rubbers. The lower bush is EAP8708
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.