BATTERY BAR ROD 1990 ON 8.5CM long EYELET END
YJH100010

£6.03 exc vat

£7.24 inc vat

In stockIn stock
Battery rod with loop for cars with larger battery 8.55mm long.

Also see 5L1158 shorter version at 6cm long for Pre 1990 cars.

This item for post 1990 cars is the looped battery fixing rod with longer thread that fits on the back battery box bracket by the positive earth terminal and held on with a nut and bolt.

£6.03 exc vat

£7.24 inc vat

In stockIn stock

Recommended usage 1 x YJH100010 to fit one mini.
Battery fittings, cables and main looms - Qty 1

Recommended products

They increased the length on this hook end bolt by 2cm in 1990. The shorter version @5.5cm is 5L1159 -this fits the front

Alternative products

Also see YJH100010. 8.5cm Long for later cars this is the looped battery fixing rod for pre 1990 cars. This rod fits on the back bracket by the positive earth terminal with a nut and bolt.

Kit products

Battery bar and fitting kit for all post 1990 cars whcih had the longer battery bolts.

People also bought products

Battery bar and fitting kit for all post 1990 cars whcih had the longer battery bolts.

Battery bar and fitting kit for all pre 1990 cars whcih had the shorter battery bolts.

Dip switch lead for right hand drives cars, these are not included with new looms.

Genuine Bosch lambda sensor, fitted to both the twin and single point injection cars and fitted in the same exhaust manifold shared by both cars. Be warned the cheaper non branded sensors cause lots of issues hence we only sell the Bosch version.

Electronic ignition conversion. For points type distributors, fixed or sliding. Negative earth only. Also, available for earlier 23/25D on Negative earth (LU142) or earlier 23/25D with Positive earth (LU142AP12).

ONLY use GCL217 coil for bal...

Bluetooth battery charge monitoring system. Compatible with smartphones running IOS, Android or Windows 10. Battery voltage can easily be checked via an app on your smartphone/tablet within bluetooth range.



Step 1

Download...

Pop rivet for fixing the headlamp bowl to the wing. Great for MS14 metal bowl but be careful if using on plastic bowls

This is the hazard switch repair plug for post 1976 rocker switches, pins supplied so you can wire accordingly.

Lots of things have been written about performance plug ignition wires but regardless of what you believe we all know that good wires are a must. This special competiton wires set from the Lucas factory has 8mm wire and the highest performance, no br...

Small battery cable retaining bracket bolted at the front of the engine for pre engaged manual cars approx 1985 onwards.

Brand new modern electronic version of the classic centre speedo, housed in a billet case with OLED display this unit fits as per original speedos. Features include:



*Trip and total miles

*Remote trip reset

*Driv...

Wiper Swithch MK1/2/EARLY MK3 blade type switch for using to convert to 2 speed wipers when current 2 speed wiper motor is used.

For modern day petrol, except 1275cc. See 37H8379MS for 1275cc.

After lengthy tests we have found nearly all vac units are not to the originals but with the change of added oxygenates to petrol in the 1980's and then ethanol in ...

Fits our 45/59d distributors, 1275cc as fitted to 12G4180 and ADU3825

Along with our distributor manufacturer we have found this to be the best for modern day fuels for all 45 or 59d distributor for 1275cc uses as...

Set of 4 ignition leads from the original supplier to Unipart, suitbale for all twin point minis 1997 onwards

Negative earth only-45D electronic distributor with vac for 1275GT and any pre A Plus 1300cc engine including Sprite and Midget in line engines-

For best performance and tune we advise our electronic Evolution version C-27H7698<...

Negative earth A Plus 59D for any 1275cc with vac unit with modern day driving curves and petrol avaiable.

For best performance and tune we advise our electronic evolution version C-27H7701

Distributors can 'work' lon...

Gasket/seal for all 1997 on mpi headlamp bowls (self levelling type).

original Lucas type RESIN BASED CONDENSER made for the 45/59D type distributor if you want a quality item rather than the cheaper inferior parts available. Filled with 3m of winding inside as per original Lucas but every copy analysed to date has ...