Shock absorbers are not all equal. The Spax brand is often considered to be the top of the range. Spax dampers are Krypton gas pressurised for a much longer life and unlike standard oil filled shocks they are consistent in light to heavy use. The scr...
Replacement uprated suspension tie bar bush as found in our C-STR627 performance kit. Manufactured to a smaller height than the standard bush, these should under no circumstances be mixed with other kits or bushes.
Rear, adjustable anti-roll bar kit complete.
Contains 3/4" steel bar and spherical joints to ensure ultimate stiffness and effciency.
Not recommended for road use.
General:
Use of a rear anti-roll b...
KYB front dampers, 9 years ago after initial testing Minispares
introduced the Kyaba (KYB)'s gas charged "Gas-a-just" dampers to the mini market providing an excellent upgrade for those running standard shocks on a road car even with 13" whe...
coil spring for use on front suspension of coil spring type dampers as in kit RSX519
150mm long.
SPECIAL OFFER OF 4 ADJUSTABLE SHOCKS AND SUSPENSION TRUMPETS. The shocks are standard height Mini Spares Spax adjustable and the adjustable suspension trumpets are Genuine Hilos.
The rubber washer type dust cover to fit either side of the spherical rod end (rose joint) sold as a pair and should always be fitted. Please note you will need turn down the spacers slightly if fitting these to allow for the extra width.
For use with standard tie bars only. Fixed front anti-roll bar kit complete, originally developed for twinpoint minis which has larger wheels and more body roll
Contains a 1/2" steel bar and comes complete with all components required fo...
These are KYB 25% upgrade on their KYB standard oil damper. Beware of others who claim 25% upgrades. They do not know what they are 25% upgrade of. We have tried and tested every shock on the market, these are the best quality and priced
da...
These superb standard replacement shock absorbers are a gas upgrade over the standard item giving a higher level of performance of 25% claimed by the manufacturer. Fully open length from pin centres is 368mm and closed length is 222mm.
Koni Shocks Possibly the best name in shock absorbers, and they're available for the lowered Mini! Sold singly but recommend fitting pairs
see C-STR1675 for performance increase. Closed length from pin centres is 215mm-
All shock absorbers are not created equal, the Spax brand is often considered the top of the heap. Spax dampers are Krypton gas pressurised for much longer life and unlike standard oil filled shocks, they are consistent in light to heavy use. The scr...
Adjustable Krypton gas pressurised dampers by Spax for front of Mini. All shock absorbers are not created equal, the Spax brand is often considered the top of the heap. Spax dampers are gas filled for much longer life and unlike standard oil filled s...
Adjustable anti-roll bar kit complete
The kit contains a 3/4" steel bar, mounted in alloy mounting blocks. Two collars welded to the bar restrict sideways movement of the bar. Fully spherical jointed with sliding alloy blocks to allow ra...
All shock absorbers are not created equal, the Spax brand is often considered the top of the heap Spax dampers are Krypton gas pressurised for much longer life and unlike standard oil filled shocks they are consistent in light to heavy use. The screw...
Front progressive bump stop kit for hydrolastic cars. Mounting brackets and rubbers. Improves car handling; especially under braking and when fully loaded.
Rubbers are available separately, AHH7074.
See C-AJJ33...
Rear progressive bump stop kit for hydrolastic cars. Mounting brackets and rubbers. The rearward pitch under hard acceleration can be minimized by the fitting of progressive bump stop kits. This also improves the car's handling when fully loaded.
Original large boot to fit over and protect rod ends (rose joints). Sold individually.
Ultimate lower arm for road or race. (pair supplied)
One piece, forged, fully adjustable on the car lower arms (with knuckle for bushes) to allow adjustment for any camber setting required. Sold in pairs only. It is recommended that you fit ...
This is the spacer for fitting either side of the spherical joint or rose joints on lowers arms, made to fit all our lower arms with this type of fitment. Sold individually
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.