GASKET OIL FILTER HOUSING SPIN ON FILTERS ONLY
12A2035

($0.36) £0.36 exc vat

($0.43) £0.43 inc vat

In stockIn stock
Gasket for all spin on filter heads to block except aftermarket billet types which use 88G402. For the latest state of the art gasket material see GUG705553GM

($0.36) £0.36 exc vat

($0.43) £0.43 inc vat

In stockIn stock

Recommended usage 1 x 12A2035 to fit one mini.
Oil Filter Components - Qty 1
Oil Pumps, Filters and Coolers - Qty 1

Recommended products
OIL FILTER FRAM SPIN ON TYPE 1973 TO 1996 (MANUAL ...
GFE166

FRAM spin on type oil filter. 1973 TO 1996 MANUAL GEARBOX. The fewer miles you drive your car, the more frequently you should change your oil!

Spin on to filter head type, most A-Series engines except the direct screw into block type.

($2.15) £2.15 exc vat

($2.58) £2.58 inc vat
Alternative products
GASKET OIL FILTER HEAD LATE GENUINE
GUG705553GM

Block to filter head gasket when spin on type filter is used (except billet types which use 88G402). The black side goes against the engine and the red against the filter. This also has a sealant strip on it to help stop leaks.

($1.74) £1.74 exc vat

($2.09) £2.09 inc vat
People also bought products
11/16" DOWTY SEAL
DSM18

11/16" dowty seal for post 1991 cars where the original pipe has been replaced with a braided pipe or an oil cooler has been fitted using part number MOC4. used on the TCZ102

($2.40) £2.40 exc vat

($2.88) £2.88 inc vat
PUROLATER FILTER BOWL TO HEAD SEAL
12A1591

This is the large seal for the early type oil filter assembly pre spin on type.

($3.00) £3.00 exc vat

($3.60) £3.60 inc vat
MINI SPARES COMBINED BLOCK/GEARBOX GASKET AND SEAL...
AJM100MS

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.



Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

($26.00) £26.00 exc vat

($31.20) £31.20 inc vat
RIGID ENGINE TO GEARBOX HALF MOON SEAL U
CAM6548

Originally developed by Rover to cut down on warranty hourly costs on powertrain warranty repairs, by their main dealers.-Labour time allowed at Rover dealers for fitting this seal was 3.4 hours labour rate.

This is a special rigid seal and ...

($4.00) £4.00 exc vat

($4.80) £4.80 inc vat
TIMING COVER GASKET "GENUINE" PRE A+
GUG705803GM

Genuine Mini Spares Klinger timing chain gasket for any BMC A series engine with 10 gasket holes, fitted until the introduction of the A plus type which had a bulge in its side where the tensioner was fitted which had 11 holes.

The klinger m...

($4.70) £4.70 exc vat

($5.64) £5.64 inc vat
GEARBOX TO BLOCK GASKET SET - GENUINE MINISPARES
GUG703049SG

Genuine Mini Spares green and black upgraded Klinger gasket set. 3 pieces



Has the extra front gasket required for 3 synchro case use

($5.48) £5.48 exc vat

($6.58) £6.58 inc vat
WATER PUMP GASKET
88G215

Non genuine water pump gasket for all A series engines.

($0.33) £0.33 exc vat

($0.40) £0.40 inc vat
TIMING COVER GASKET. PRE TENSIONER
12A956B

Mini Spares Non genuine timing chain gasket fitted to every BMC A series engine with 10 gasket holes until the introduction of the A plus type which had a bulge in its side where the tensioner was fitted which had 11 holes.

Gasket material h...

($1.50) £1.50 exc vat

($1.80) £1.80 inc vat
GASKET ENGINE FRONT PLATE A PLUS
CAM4700B

Mini Spares quality gasket. When the factory introduced a timing chain tensioner to single row chains on the A plus engines they had to change the shape of the front plate giving it a bulge. This is the gasket for A plus engines only.

($0.75) £0.75 exc vat

($0.90) £0.90 inc vat
HYLOMAR 100G TUBE
GGC102

Probably the most used jointing compound used by mini owners for nearly every gasket except the cylinder head. Some late minis used a silicone jointing compound instead of gaskets on the differential, see GAC8000.

($8.25) £8.25 exc vat

($9.90) £9.90 inc vat
BUSH TAPPET CHEST COVER
12A1176

These can get really cooked behind the exhaust manifold, if you're oozing oil it may be time to replace them. Sold singly 2 required per engine

($0.75) £0.75 exc vat

($0.90) £0.90 inc vat
ENGINE BLOCK SET 1300 pre A plus
GUG701615CS

genuine block gasket set for 1300 without tappet chest seals or clutch seal

($20.06) £20.06 exc vat

($24.07) £24.07 inc vat
BLOCK GASKET SET ALL 1300 EXCEPT S
AJM206MS

Mini Spares own Universal gasket set for solid wall blocks

For any manual block, includes gaskets for "A"Plus and pre A Plus timing covers, but is less tappet chest cover gaskets. Does not include clutch oil seal.

We now offer an en...

($10.71) £10.71 exc vat

($12.85) £12.85 inc vat
FRONT PLATE GASKET PRE A+
12G619B

Engine front plate gasket for any A series units pre A Plus.

For A plus see GUG705554GM or CAM4700B.

For a superb quality engine block gasket set see GUG701614CS

($0.90) £0.90 exc vat

($1.08) £1.08 inc vat
AUTOMATIC OIL FILTER HEAD GASKET
GUG705552GM

($1.40) £1.40 exc vat

($1.68) £1.68 inc vat
TAPPET CHEST GASKET (EARLY CORK)PRE 1966
12A1139

All early A series engines had these gaskets made in cork for the rear convex shape tappet chest covers and fitted to minis until 1966. The convex side plate was only designed to take these cork type gaskets and the later concave shape cover will onl...

($1.35) £1.35 exc vat

($1.62) £1.62 inc vat
TURBO OIL OUTLET GASKET
GUG705845GM

last few oulet gasket for turbo sold singly but avaialable in GUG701142HS

($0.80) £0.80 exc vat

($0.96) £0.96 inc vat
GEARBOX TO ENGINE HALF MOON SEAL
AHU1959

Front main (half moon) black seal for all transverse engines. This is the flexible item as fitted originally after replacing the early red type that leaked.

See [link]CAM6548{/link] for the rigid seal designed by Rover for all their warran...

($2.05) £2.05 exc vat

($2.46) £2.46 inc vat
OIL PUMP GASKET 4 BOLT TYPE
12G730B

Universal paper oil pump gasket for all A series engines. Fits between pump and block. See GUG705560GM for genuine.

($0.30) £0.30 exc vat

($0.36) £0.36 inc vat
BLOCK GASKET SET SMALL BORE PLUS COOPER S
AJM202MS

Mini Spares own Universal gasket set.

This engine block gasket set fits all manual blocks and include rubber tappet chest covers and bolt seals, also including A plus and Pre A Plus timing gear and cover gaskets. For the equivalent gasket se...

($12.75) £12.75 exc vat

($15.30) £15.30 inc vat