REBOUND BUFFER HYDROLASTIC. FLAT BUMP

21A1517

($4.49) £4.49 exc vat

($5.39) £5.39 inc vat

In stock

This is the flatter type rear rebound rubber on hydrolastic cars, uses exactly the same metal base plate as 21A1520 which is the larger cone type which is the bump stop rubber.

($4.49) £4.49 exc vat

($5.39) £5.39 inc vat

In stock

Recommended usage 2 x 21A1517 to fit one mini.

Rear Suspension, Hydrolastic - Qty 2

People also bought products

REAR HUB LESS STUDS TO FIT ALL MODELS

RLH10021

All models of the Mini use the same rear hub (this piece holds the rear wheel bearings). The Mini's rear wheel bearings are more than adequate, usually requiring only occasional repacking with grease. The weak link may be the cast iron hub; it is not...

($26.00) £26.00 exc vat

($31.20) £31.20 inc vat

RADIUS ARM REPAIR KIT

GSV1125

Complete rebuild kit for rear radius arm as sold by us since 2005.

Beware of cheap imports that are available in the market as they do not have correct heat treatment where required and have no longevity.

Kit Includes: shaft, beari...

($9.98) £9.98 exc vat

($11.98) £11.98 inc vat

HYDROLASTIC FLUID

MORRIS05

The term 'hydro' in the renowned Cooper "S" suspension system "Hydro-lastic" means at least in part a liquid. This famous system was designed by BMC make for smooth and fluid ride while taking all of the abuse of off road rallying. It is not uncommon...

($35.25) £35.25 exc vat

($42.30) £42.30 inc vat

RADIUS ARM SHROUD R/H

14A6615

Mini Spares product from own original tooling since 1989.This small sheet metal panel mounts below the horizontal seam, covering the pivot pin of the R/H rear radius/trailing arm.

This shroud uses 14A7091 rubber plug not suppl...

($6.30) £6.30 exc vat

($7.56) £7.56 inc vat

HYDROLASTIC PIPE L/H

21A1577

Floor pan front to rear for the left hand side, only to the floor shape before rod change cars - ideal for MK1/2 restoration.

($61.50) £61.50 exc vat

($73.80) £73.80 inc vat

HYDRO UNIT GAITER

21A1496

The weathered and cracked rubber you see is not actually the hydro displacer bag, but rather this rubber boot to protect it. Sold singly 1 required per displacer.

($12.00) £12.00 exc vat

($14.40) £14.40 inc vat

HYDRO QUADRANT SPRING WASHER

2K2545

special double coil spring washer which fits on the rear hanbrake quadrant on Hydrolastic cars only.Known as a thackery washer

($0.39) £0.39 exc vat

($0.47) £0.47 inc vat

WASHER FOR SHOCK ABSORBER DAMPER

AJD7162

Fits top and bottom of the front damper and the lower rear damper to keep the bush from moving in the damper (shock absorber) eye sockets. 3/8"hole.

1.4mm thick by 24.6mm wide.

($0.22) £0.22 exc vat

($0.26) £0.26 inc vat

ST BUMP STOP RUBBER

AHH7074

Same bump stop as fitted to MGB, this was utilised by ST Works Abingdon to go on their bump stop kits C-AJJ3313/4007 for hydrolastic minis. Sold singly.

($6.10) £6.10 exc vat

($7.32) £7.32 inc vat

REAR HUB OIL SEAL

GHS102

For the front wheel bearings of the Spridgets, rear of the Mini.

($1.24) £1.24 exc vat

($1.49) £1.49 inc vat

SUSPENSION KNUCKLE JOINT GAITER PLUS SOME TRACK RO...

21A425

This is the rubber gaiter that fits suspension knuckles GSV1118, GSV1118MS, Plus it also fits many aftermarket and some old genuine track rod ends. Rover and Unipart changed designs and suppliers many times so we cannot advi...

($0.86) £0.86 exc vat

($1.03) £1.03 inc vat

RADIUS ARM BRONZE BUSH

2A7325

This outer bush 2A7325 on the radius arm is bronze and needs reaming out when fitted. The inner ATJ4098 is a roller bearing--all parts are in a new kit GSV1125

($2.99) £2.99 exc vat

($3.59) £3.59 inc vat

HANDBRAKE QUADRANT HYDROLASTIC

21A1507

The rear handbrake sector fitted to the rear radius arm on hydrolastic cars only

which was different from dry suspension types. Can use PFR109 clip to secure. 2 required per car but sold singly.

($15.00) £15.00 exc vat

($18.00) £18.00 inc vat

HYDROLASTIC PIPE R/H

21A1575

Original shaped one piece front to rear hydrolastic pipe for the right hand side. See also FSP3 and FSP4 alternatives.

($61.50) £61.50 exc vat

($73.80) £73.80 inc vat

REAR ANTI ROLL BAR KIT 12.7MM THICK FIXED

C-AJJ4009

Fixed rear anti-roll bar kit complete.

Contains a 1/2" steel bar and comes complete with all components required for fitment. It is not rubber mounted except for the metalastic bushes in the drop links, and is, therefore, very efficient...

($123.75) £123.75 exc vat

($148.50) £148.50 inc vat

RADIUS ARM SHROUD L/H

14A6616

Mini Spares product from own original tooling since 1989.

This small sheet metal panel mounts below the horizontal seam, covering the pivot pin of the rear L/H radius arm. Was unavailable for many years.

This shroud uses [link]14A7...

($6.30) £6.30 exc vat

($7.56) £7.56 inc vat

REAR BUMP STOP KIT

C-AJJ3313

Rear progressive bump stop kit for hydrolastic cars. Mounting brackets and rubbers. The rearward pitch under hard acceleration can be minimized by the fitting of progressive bump stop kits. This also improves the car's handling when fully loaded.

($22.79) £22.79 exc vat

($27.35) £27.35 inc vat

SUSPENSION KNUCKLE JOINT NYLON CUP ONLY

21A423MS

Mini Spares genuine product from original supplier with the correct shape and material nylon cup, for any knuckle joints GSV1118EVO and GSV1264 and aftermarket GSV1118MS.

As of 2019 we have found Rover ...

($0.95) £0.95 exc vat

($1.14) £1.14 inc vat

SUBFRAME REAR HYDROLASTIC GENUINE

21A2160

Manufactured from original tooling and produced by Heritage using original jigs and patterns. E coated for longevity. Please note these do not come with the hydrogas retainers, you will need to weld the old ones in or fabricate something similar if y...

($380.00) £380.00 exc vat

($456.00) £456.00 inc vat

HUB REAR GREASE CAP

ATB4098

Fits the rear hub of every Mini to protect the bearings grease from debris, but

this metal cap always seems to get damaged on 10" wheel cars or when you change the bearings - make sure yours are in place.

($6.00) £6.00 exc vat

($7.20) £7.20 inc vat

Contact Mini Spares

Tel:01707 607700

Email:sales@mininspares.com

Store Details:

Potters Bar|

Harrogate|

Oldbury