NGK SPARK PLUG COPPER CORE RACE ENGINE
B9ES

($2.97) £2.97 exc vat

($3.56) £3.56 inc vat

In stockIn stock
Copper core NGK spark plug with recessed nose for high compression, highly tuned race engines.

($2.97) £2.97 exc vat

($3.56) £3.56 inc vat

In stockIn stock

Recommended usage 4 x B9ES to fit one mini.

Recommended products

Sykes Pickavent 21mm spark plug socket, 3/8" Drive

Alternative products

These NGK spark plugs are just the thing for A-Series race engines. They're very cold, for use with 12:1 & up compression, and feature NGK's special gold palladium fine tipped electrode.



please note, these are now supplied as BR9EI...

People also bought products

A higher compression engine should have a colder spark plug. The engineers explain that it has to do with flame temperature and overheating the plug. I know from experience that my race engine will melt a street plug. Choose from the following NGK pl...

BPR6E factory fitted but this is the later NGK plug.



NGK has superceeded this plug to a BPR7EIX

Gold palladium projected electrode nose which has good ignitability on low voltage for 998/1275 engines in standard form--upgrade to BP6ES. Price is for one spark plug.

Slightly hotter running engine plug for A Plus 998 and all 1275cc standard engines. For engine running CR of 9.4 to 10:1

These NGK spark plugs are just the thing for A-Series race engines. They're very cold, for use with 12:1 & up compression, and feature NGK's special gold palladium fine tipped electrode.



please note, these are now supplied as BR9EI...

A higher compression engine should have a colder spark plug. The engineers explain that it has to do with flame temperature and overheating the plug. I know from experience that my race engine will melt a street plug. Choose from the following NGK pl...

Standard heat plug for all 850/998cc low compression engines up to 9.4:1 CR.

A plus 998 engines with flat top pistons use BP6ES which run hotter with 88 degree thermostats use BP6ES also.

Great plug for tuned high compression engines and turbos this plug is gold palladium tipped for good ignitability on low voltage. Now supersedes to BR8EIX Iridium.

Copper core recessed nose for high compression highly tuned engines.

The spark plug for twin point injection cars to give good ignitability requiring low voltage with resistors to offer protection of the engine management system car radios and telephones.

100% silcone translucent outer sheath, 8mm lead set with stainless steel wire spiral bound wire giving instant and greater resonance, Kevlar fibre core and a ferromagnetic layer for EMC suppression by Luminition. Top end of ignition lead sets.

Lots of things have been written about performance plug ignition wires but regardless of what you believe we all know that good wires are a must. This special competiton wires set from the Lucas factory has 8mm wire and the highest performance, no br...

NEGATIVE EARTH ONLY. Cooper"S" 23D distributor, no vac unit-This is NOT THE ORIGINAL LUCAS ITEM but a new contact less electric copy of 40819 to cope better with modern day fuels. Fitted with the better Red rotor arm upgrade.Cheaper than many electro...

Best on the market, sports coil-Not Lucas. A standard coil can only do so much, and when compression is raised (as in most high performance engines) or improper fuel mixtures occur something better is needed. This sports gold coil with proven origina...

CSI-Ignition is a fully electronic ignition built in an original housing. You will have to remove the cap to see the difference! Neg earth only

After removing the cap you can select between 16 different curves by using

a screwdriver...

These are the screws needed to fix the condensor, points, base plate and vacuum to 45D and 59D distributors. For 23/25D type see 17H5106

These are the screws needed to fix the condenser, points and base plate to 23/25D distributors. See 57H5135 for 45D type distributors.

A Plus Electronic Ignition distributor with vac unit, modified to our spec in UK to give best performance on any minis with std to 276 camshaft profile.

Ideal for our EVOLUTION001 camshaft

Brand New distributor complet...