TOOTHED BELT ON C-AEG455/C-AEA477/8
C-BELT255

($9.30) £9.30 exc vat

($11.16) £11.16 inc vat

In stockIn stock
tooth belt drive fan belt

this is for the tooth belt drive crank pulley to the 28 tooth water pump pulley

($9.30) £9.30 exc vat

($11.16) £11.16 inc vat

In stockIn stock

Recommended usage 1 x C-BELT255 to fit one mini.

Recommended products

special tooth drive belt for cooling/charging pulleys

this one fits the alternator pulley and the 38 tooth water pump pulley.

People also bought products

Used on some special and racers without charging system this belt is 737 mm long

For high performance engines an efficient crank damper is a necessity to reduce failure. The standard damper commonly used is barely adequate for the standard engine. Mini Spares has reproduced the original "S" damper and pulley-far superior to the s...

Latest type grooved fan belt that fits special grooved pulleys on twin point cars only for better life expectancy. See kits C-AEA538 and C-AEA538A to convert earlier cars to this sort of set up.

tooth type fan belt for special cooling/charging system

This is for the tooth belt crank pulley and the large 38 tooth water pump pulley.

special tooth drive belt for cooling/charging pulleys

this one fits the alternator pulley and the 38 tooth water pump pulley.

For minis with latest A plus water pump pulley CAM6408 (4.75" wide) and an alternator. This belt is slightly shorter than GCB10838 so always keep a spare so you know which size belt fitted your car best. This seemed to be fi...

special toothed belt for cooling belt drive kits

For alternator pulley to 28 tooth water pump pulley

Timing belt camshaft drive systems have been around for a number of years, in fact for a lot longer than the life expectancy of the belts. If you have a belt drive conversion you should have one of these replacement belts. If you want to keep things ...

3 YEAR GUARANTEE-UK made.Large impeller higher capacity water pump with top quality die cast body . Mini Spares procured product as the original superb Rover Airtex tooling has been scrapped.

Fitted with a PPS, glass filled plastic impeller...

3 YEAR GUARANTEE-UK made. Large impeller higher capacity water pump with a high quality die cast body. A Mini Spares procured product as the original superb Rover Airtex tooling has been scrapped.

Fitted with a PPS, glass filled plastic impe...

Originally developed by Rover to cut down on warranty hourly costs on powertrain warranty repairs, by their main dealers.-Labour time allowed at Rover dealers for fitting this seal was 3.4 hours labour rate.

This is a special rigid seal and ...

Designed to reduce the horsepower drain and slow down the water moving through the radiator to allow it time to cool, its very important for the higher RPMs we run today. This oversize pulley is 4.2" diameter, earlier cars used a 3.875" wide pulley. ...

Radiator hose kit for all spi Minis. This kit has top and bottom radiator hoses and 2 lengths of heater hoses…all in shiney red Silicone that should last forever and not degrade with heat, time and environment. This kit is ideal for both the racer wh...

Radiator hose kit for all spi Minis. This kit has top and bottom radiator hoses and 2 lengths of heater hoses…all in shiney blue Silicone that should last forever and not degrade with heat, time and environment. This kit is ideal for both the racer w...

Radiator hose kit for all pre 1989 1275cc Minis except clubman which has a longer top hose. the kit has top and bottom radiator hoses and two lengths of heater hoses(1m and 1.2m long)…all in shiney black Silicone. These should last forever and not de...

Complete fixing kit for a water pump, includes replacement silicone bypass hose, clips, superseal gasket, replacement bolts and washers.

This thermostat housing fitting kit, suitable for all single tier thermostat housings. Comes with new studs, nuts, washers and Klinger thermostat housing gasket

Long lasting silicon by pass hose between cylinder head and water pump.

These are easy to cut and slide on easier than the old conventional rubber type.

It has been made this length to fit 1275cc engine,which used the longest hose.<...

A must for any tuned road car. A full electric fan kit, Mini Spares helped to design with precision made brackets to mount directly to the mini radiator to suck air in order to maximise efficiency and cooling. It therefore does not block cold airflow...

The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will ...