DASHPOT DAMPER HIF38
LZX1511

($23.52) £23.52 exc vat

($28.22) £28.22 inc vat

In stockIn stock
This dashpot carb damper is for the HIF38 1.5"SU as fitted on original 1990s 1275 minis except Coopers with HIF44 carb, but was also used on some Metro HIF44 carbs. check the number on your old one.

($23.52) £23.52 exc vat

($28.22) £28.22 inc vat

In stockIn stock

Recommended usage 1 x LZX1511 to fit one mini.
HIF38 Carburettor 38mm 1.5 inch - Qty 1
Carburettor HIF38 and HIF44 - Qty 1

People also bought products
HIF44 CARB REPAIR KIT WITH PLAIN THROTTLE DISC
CRK162

($79.01) £79.01 exc vat

($94.81) £94.81 inc vat
RETURN SPRING KIT FOR HS4
WZX1335

Return spring kit for HS4 carburettor spindle.

($7.65) £7.65 exc vat

($9.18) £9.18 inc vat
SPI THROTTLE BODY SPACER BLOCK
LZV1101EVA

SPI throttle body spacer - the gaskets are available as LZV1101GASKET

($21.00) £21.00 exc vat

($25.20) £25.20 inc vat
BUTTERFLY / THROTTLE DISC HIF44 EXCEPT TURBO
WZX1414

Throttle disc only for HIF44-non turbo and if replacing the spindle there are 2 type, threaded one end only use WZX1127 for very early carbs 1980-81 only, but all later cars were threaded both ends use WZX1128

($30.09) £30.09 exc vat

($36.11) £36.11 inc vat
CARB HIF38 REBUILD KIT
CRK274

For HIF38 carbs,this is the full rebuild kit with the spindle and throttle disc and bushes--- see CSK94 for service kit

($92.88) £92.88 exc vat

($111.46) £111.46 inc vat
CARB HIF38/44 ABUTMENT BRACKET
CAM4942

Metal bracket that fits between the manifold and the HIF44 (1.75")carb to hold the cable - the choke cable clip for this bracket is CZK6491. Also for HIF38. For HS4 carb see 12G766 bracket. Original Turbo type [...

($11.93) £11.93 exc vat

($14.32) £14.32 inc vat
CARB BALANCER TOOL
MSA1003

This tool/gadget allows you to balance both air intakes on either twin SU or twin choke carbs so they flow exactly the same to give better performance and economy.

($28.50) £28.50 exc vat

($34.20) £34.20 inc vat
CARB BUTTERFLY ANTISTALL HS4 WAXSTAT JET TYPE
WZX1324

plain butterfly with small hole at bottom for HS4 waxstat jet type carb and uses WZX177 spindle-or see kit full rebuild kit CRK121. This is usually fitted to FZX3013 replacement carb --same size butterfly on all...

($17.24) £17.24 exc vat

($20.69) £20.69 inc vat
JET ASSY HIF38 1275cc
WZX1455A

jet for HIF38 carb and is 0.090 size--for HIF44 see WZX1453A

($16.97) £16.97 exc vat

($20.36) £20.36 inc vat
FLOAT NEEDLE/SEAT FOR HIF38/44 LARGER TYPE VALVE
WZX1099A

Fitted to HIF38 and HIF44 carbs, ethanol tolerant product. Bigger bodied valve.

For turbo models see WZX1095 .Quantity required-1

($20.43) £20.43 exc vat

($24.52) £24.52 inc vat
FLOAT REP KIT for HIF CARBS
WZX1509A

This float is ethanol tolerant and will fit all HIF38/44 carbs and the spindle is CUD2082 ..Quantity required-1 set for single carb.

Turbo uses WZX1095 needle valve. An expensive puncture proof stay up float is av...

($43.25) £43.25 exc vat

($51.90) £51.90 inc vat
SPINDLE KIT HIF44
WZX1128

spindle threaded both ends for HIF44 for most late carbs--see WZ1127 for spindle with thread one end only as per early metro cars. Thread size is 1/4 BSF

($43.59) £43.59 exc vat

($52.31) £52.31 inc vat
HIF44 JET ASSEMBLY
WZX1453A

jet assembly (0.100") for the HIF44 carb only- see MGM10008 for HIF38(0.090")

($25.76) £25.76 exc vat

($30.91) £30.91 inc vat
BEARING AND NEEDLE JET HIF
WZX1441

bearing and needle jet kit(not carb needle) for both HIF38 and HIF44.

.Quantity required for single carb-1 set.

($16.64) £16.64 exc vat

($19.97) £19.97 inc vat
CARB BUTTERFLY HIF38 DISC KIT
WZX1387

Plain butterfly disc kit for the HIF38 carb,which we sometimes order in in as requested by the customer as they are very slow selling--same size butterfly on all 1.5" carbs

($14.40) £14.40 exc vat

($17.28) £17.28 inc vat
STUD HS4/HIF CARB + some 12G103 HOUSING (5/16")
CHS2514

Universal stud made for fitting the HS4/HIF carb to the manifold (except HS6 with alloy spacer on cast one piece manifold which requires CHS2515 (5.8mm longer)) and it also fits the cylinder head to take the thermostat housi...

($0.78) £0.78 exc vat

($0.94) £0.94 inc vat
CARB NEEDLE SPRING HIF and HS4
AUD3306

The little spring that sits at the end of a spring loaded carb needle on late HS and all HIF carbs where applicable.

($0.78) £0.78 exc vat

($0.94) £0.94 inc vat
NEEDLE BAQ SWINGING TYPE
CUD1114

($10.85) £10.85 exc vat

($13.02) £13.02 inc vat
CARB HIF38 SERVICE KIT
CSK94

Service repair kit for the HIF38 carb (1.5") fitted to the first 1275 engined cars in 1990s such as the sprite.

($63.02) £63.02 exc vat

($75.62) £75.62 inc vat
PETROL PIPE HOSE 1 METRE
PETROLPIPE

Special rubber hose 1/4" bore for use on petrol lines, this is in black and not armour plated outside but does have internal reinforcing. Supplied as pre cut 1m length with 2 clips and is safe to use with modern fuels with higher ethanol content. SAE...

($3.27) £3.27 exc vat

($3.92) £3.92 inc vat