ENGINE CAM/OIL PUMP LUBE.1 Oz

Converted into a non melting type grease.Favoured by proffessionals for camshaft,lobes and lifter,and any valvetrain to stop scuffing on start up. Also useful for oil pumps to stop drain back on start up

($6.45) £6.45 exc vat

($7.74) £7.74 inc vat

TIMING DISC 360°

C-AJP337

A vital aid for accurately timinig non-factory camshafts. This disc is a 360 degree protractor disc made by kent cams.

($9.60) £9.60 exc vat

($11.52) £11.52 inc vat

FORGED STEEL CON ROD SET 5.75"LONG 1.625"JOURNAL 2...

C-AEG624EVO

Minispares steel connecting rods are machined by Arrow Precision Eng from double air re-melted 817M40 forgings to X condition. Weight 445g per rod

The new X rod design maintains stiffness whilst reducing weight where it is not required. ARP ...

($1,050.00) £1.050.00 exc vat

($1,260.00) £1.260.00 inc vat

TIMING COVER AND FRONT PLATE FITTING KIT

MSSK063

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

($8.00) £8.00 exc vat

($9.60) £9.60 inc vat

SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +40

C-STN103-40

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading F1 German piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience. Glyn Swift was usi...

($299.00) £299.00 exc vat

($358.80) £358.80 inc vat

MINI 1275 CAM LINER SET

MS3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

($15.75) £15.75 exc vat

($18.90) £18.90 inc vat

MINI SPARES COMBINED BLOCK/GEARBOX GASKET AND SEAL...

AJM100MS

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.

Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

($26.00) £26.00 exc vat

($31.20) £31.20 inc vat

MAINS SET STANDARD PRE A PLUS/EARLY A+ 1275 ACL RA...

C-AEM91120-00

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

($71.78) £71.78 exc vat

($86.14) £86.14 inc vat

BIG ENDS 1300 STD SIZE EXCEPT COOPER S ACL RACE

C-AEB91306-00

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

($69.06) £69.06 exc vat

($82.87) £82.87 inc vat

BIG ENDS SET 998/1098/970/1071/ COOPER "S" ACL RAC...

C-AEB572-00

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

($66.27) £66.27 exc vat

($79.52) £79.52 inc vat

TIMING CHAIN DUPLEX LIMITED STRETCH TYPE

2H4905EVO

Race quality heavy duty double row performance endless timing chain. It is the best chain available and used by top engine builders, also fits MGB/Midget. This chain is for duplex gears that is used by racers as a limited stretch heavy duty version m...

($19.64) £19.64 exc vat

($23.57) £23.57 inc vat

4° OFFSET WOODRUFF KEY

WKN4OSET

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

($10.50) £10.50 exc vat

($12.60) £12.60 inc vat

2° OFFSET WOODRUFF KEY

WKN2OSET

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

($10.50) £10.50 exc vat

($12.60) £12.60 inc vat

3° OFFSET WOODRUFF KEY

WKN3OSET

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

($10.50) £10.50 exc vat

($12.60) £12.60 inc vat

RIGID ENGINE TO GEARBOX HALF MOON SEAL U

CAM6548

Originally developed by Rover to cut down on warranty hourly costs on powertrain warranty repairs, by their main dealers.-Labour time allowed at Rover dealers for fitting this seal was 3.4 hours labour rate.

This is a special rigid seal and ...

($4.00) £4.00 exc vat

($4.80) £4.80 inc vat

ENGINE TO GEARBOX NUT AND BOLT KIT

MSSK060

Complete nut, bolt and washer set for engine to gearbox only

($3.50) £3.50 exc vat

($4.20) £4.20 inc vat

WATER PUMP FITTING KIT FOR GWP187 AND GWP188

GWP187FK

Water pump fitting kit for models without bypass facility, includes new bolts, washers and superseal gasket.

($4.00) £4.00 exc vat

($4.80) £4.80 inc vat

WATER PUMP FITTING KIT FOR GWP134 AND GWP132

GWP134FK

Complete fixing kit for a water pump, includes replacement silicone bypass hose, clips, superseal gasket, replacement bolts and washers.

($8.00) £8.00 exc vat

($9.60) £9.60 inc vat

BIG ENDS PLUS 30 OVERSIZE 998/1100 COOPER S

AEB572-30

Con Rod bearings, 850-1275 1 5/8" journals. Heavy duty steel backed bearing for durability and long life. The bearings to use if you want it to last. The only bearings to use on a fast road motor.

( Tri-Metal )

Sintered copper lead...

($22.96) £22.96 exc vat

($27.55) £27.55 inc vat

ORIGINAL TYPE CAM FOLLOWER FOR FAST ROAD USE

2A13EVO

Mini Spares cam follower with original convex bottom Radii as used by BMC/Rover and made by Clanceys but less the oil hole. Using Clancey drawings and to our design for better cam performance and lift we have made the push rod recess deeper for stabi...

($2.88) £2.88 exc vat

($3.46) £3.46 inc vat

CRANK THRUST WASHER SET 1275

VPW41

Set of std VP thrust washers for 1275.

($14.25) £14.25 exc vat

($17.10) £17.10 inc vat

PISTON SET 998 HC CIRCLIP TYPE +20 OVERSIZE

ADU3490-20

998cc flat top 3 ring circlip type piston set as fitted to early A plus to replace 4 ring set type. Gave 10.3 to1 CR and is a good alternative to use on any 998 with circlip type pistons. Replaced 4 ring(3 ring and scraper) P20754 from Hepolite 1980o...

($152.00) £152.00 exc vat

($182.40) £182.40 inc vat