WASHER FOR BRAKE SERVO NON RETURN VALVE
11D5070

(0,70 €) £0.70 exc vat

(0,84 €) £0.84 inc vat

In stockIn stock
Washer for 17H2646ORIGINAL brake servo non return valve

(0,70 €) £0.70 exc vat

(0,84 €) £0.84 inc vat

In stockIn stock

Recommended usage 1 x 11D5070 to fit one mini.

People also bought products
STARLOCK WASHER FOR MK3 DOOR HANDLE SCREW
WE702101

(0,08 €) £0.08 exc vat

(0,10 €) £0.10 inc vat
WASHER 5/16" STAINLESS STEEL FLAT WASHER
GFK1114SS

(0,13 €) £0.13 exc vat

(0,16 €) £0.16 inc vat
WASHER PLAIN 3/16" 2bA x 3/8" OD FOR C-AJJ3381 BON...
WA1090

Plain washer 3/16" or 2BA.

(0,08 €) £0.08 exc vat

(0,10 €) £0.10 inc vat
WASHER FOR AIR FILTER BOLT
12A1437

Fibre washer to go under 12A1436 metal washer on the twin HS2 carb air cleaner. One required for HS4--sold singly order as required

(0,37 €) £0.37 exc vat

(0,44 €) £0.44 inc vat
OIL PRESSURE RELEASE VALVE COPPER WASHER
6K431

The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will ...

(0,36 €) £0.36 exc vat

(0,43 €) £0.43 inc vat
SPRING WASHER 5/16"
GFK1125

(0,11 €) £0.11 exc vat

(0,13 €) £0.13 inc vat
7/8" REPAIR WASHER WITH 5/16" HOLE
GFK1135

(0,16 €) £0.16 exc vat

(0,19 €) £0.19 inc vat
WASHER PLAIN 5/16"
GFK1114

5/16" flat plain washer.

(0,06 €) £0.06 exc vat

(0,07 €) £0.07 inc vat
WASHER PLAIN 3/8"
GFK1115

(0,03 €) £0.03 exc vat

(0,04 €) £0.04 inc vat
FRONT BRAKE HOSE AND CLUTCH HOSE LARGE SHAKEPROOF ...
WE600101

This special shake proof washer should be replaced. Found on front hose.

Also used on 21A1524 hydrolastic pipe adaptor.

(0,45 €) £0.45 exc vat

(0,54 €) £0.54 inc vat
SPRING WASHER 1/4"
GFK1124

1/4" spring washer.

(0,07 €) £0.07 exc vat

(0,08 €) £0.08 inc vat
WASHER FOR SHOCK ABSORBER DAMPER
AJD7162

Fits top and bottom of the front damper and the lower rear damper to keep the bush from moving in the damper (shock absorber) eye sockets. 3/8"hole.

1.4mm thick by 24.6mm wide.

(0,22 €) £0.22 exc vat

(0,26 €) £0.26 inc vat
FRONT SUSPENSION TIE BAR CUP WASHER
2A4328

Large cup retaining washer for the front suspension tie rod.

Sold singly 1 required per rod and 2 per car

(0,62 €) £0.62 exc vat

(0,74 €) £0.74 inc vat
WASHER FOR PETROL TANK SCREW
2A2088

If you have a van/estate or early mini sender unit in your petrol tank it will be held in by 6 screws 53K165 and these are the special copper washers that go on them. The cork gasket is GUG705711GM

(0,41 €) £0.41 exc vat

(0,49 €) £0.49 inc vat
FIBRE WASHER FOR WINDOW CATCH BOSS
14A7065B

For all sliding window models this washer sits against the chrome boss 14A8151 that hold the window catches.

(0,37 €) £0.37 exc vat

(0,44 €) £0.44 inc vat
WASHER PLAIN 1/4" x 1/2"
GFK1113

(0,08 €) £0.08 exc vat

(0,10 €) £0.10 inc vat
WASHER FOR ADP210 PLUG
1B3664

Universal fibre washer mainly used on inlet manifold blanking plugs ADP210.

(0,25 €) £0.25 exc vat

(0,30 €) £0.30 inc vat
WASHER FOR HANDBRAKE QUADRANT CLEVIS PIN
AWZ105

Concave washer for the CLZ549 pin on the quadrant of dry suspension minis.

(0,18 €) £0.18 exc vat

(0,22 €) £0.22 inc vat
SHAKEPROOF WASHER 3/8" UNF FOR REAR BRAKE HOSES
GHF323

3/8" Shakeproof washer for rear brake hoses.

(0,13 €) £0.13 exc vat

(0,16 €) £0.16 inc vat
TIE ROD/REAR SUBFRAME HEAVY DUTY FLAT WASHER
PWZ207

This is the correct thick flat washer for a suspension tie bar rod. The washer has a 7/16" hole is 1.5" wide. See 2A4328 for the correct dished washer.

(0,42 €) £0.42 exc vat

(0,50 €) £0.50 inc vat