CARB 5MM INSULATOR SPACER FOR 1.25" HS2 CARB

1G2623

(13,74 €) £13.74 exc vat

(16,49 €) £16.49 inc vat

In stock

The spacer block for between manifold and HS2 single carbs and use 1G2624 gaskets (3 of).

(13,74 €) £13.74 exc vat

(16,49 €) £16.49 inc vat

In stock

Recommended usage 1 x 1G2623 to fit one mini.

Carburettor Fixings, Throttle Pedal & Abutment Br - Qty 1

Kit products

TWIN HS2 CARBURETTOR KIT - LESS A/C

FZX3052

Not built up-A matching pair of HS2 twin carbs with polished dashpot covers plus original type twin HS2 linkage kit, inlet manifold but less air cleaners etc.

The UNC bolt holding the abutment bracket on the inlet m...

(1 146,05 €) £1 146.05 exc vat

(1 375,26 €) £1 375.26 inc vat

TWIN HS2 CARBURETTOR KIT WITH S/STEEL HEATSHIELD

FZX3052A

Not built up-A matching pair of HS2 twin carbs with polished dashpot covers and stainless steel heatshields plus original type twin HS2 linkage kit, inlet manifold but less air cleaners etc.

The UNC bolt holding the...

(1 147,79 €) £1 147.79 exc vat

(1 377,35 €) £1 377.35 inc vat

People also bought products

VITON TIPPED FLOAT NEEDLE VALVE FOR HS CARBS

VZX1100

This is the original type of needle valve that governs the plastic fuel float in your SU carb.

An alternative better upgraded version is available as CA90.

(9,75 €) £9.75 exc vat

(11,70 €) £11.70 inc vat

GENUINE SU HS STAYUP FLOAT KIT

WZX1304

The new adjustable height StayUp® Float is resistant to modern ethanol based Fuels and has a military spec closed cell construction making it puncture proof. The ability to adjust the Float Arm allows for quick and easy minor alterations to Float lev...

(19,60 €) £19.60 exc vat

(23,52 €) £23.52 inc vat

RETURN SPRING KIT FOR HS4

WZX1335

Return spring kit for HS4 carburettor spindle.

(7,65 €) £7.65 exc vat

(9,18 €) £9.18 inc vat

JET ASSEMBLY R/H TWIN HS4

AUD9102

Also denoted by its black plastic base. Twin HS4 carbs have 30 degree float bowl angles and therefore this jet is easier to fit as it is longer. L/H carb uses AUD9098A std single HS2 jet.

For...

(11,25 €) £11.25 exc vat

(13,50 €) £13.50 inc vat

HOSE CLIP 8-12MM

GHC108012

Small hose clip for 1/4" fuel line (our part number PETROLPIPE)

(1,16 €) £1.16 exc vat

(1,39 €) £1.39 inc vat

TWIN HS2 CARBURETTOR KIT WITH S/STEEL HEATSHIELD

FZX3052A

(1 147,79 €) £1 147.79 exc vat

(1 377,35 €) £1 377.35 inc vat

CARB HIF38 REBUILD KIT

CRK274

For HIF38 carbs,this is the full rebuild kit with the spindle and throttle disc and bushes--- see CSK94 for service kit

(92,88 €) £92.88 exc vat

(111,46 €) £111.46 inc vat

LEVER FOR LINKAGE 001

HAR002

(2,05 €) £2.05 exc vat

(2,46 €) £2.46 inc vat

ANCHOR TAG ON CARB

12A4

(0,66 €) £0.66 exc vat

(0,79 €) £0.79 inc vat

CARB HIF44 FULL REBUILD KIT EXCEPT TURBO

CRK167

complete overhaul kit for non turbo HIF44 carb includes needle valve and throttle shaft plus spindle--See CSK75 for service kit less spindle and disc

(97,68 €) £97.68 exc vat

(117,22 €) £117.22 inc vat

PETROL PIPE BRAIDED 5/16" BORE X 2.5"

21A2332

For 21A2331 pipe. Before the days of Aeroquip, Minis had braided petrol pipes. They should be used in place of rubber for all fuel lines where possible. This is 5/16" bore size for the joining pipe on twin tanks using the original pipe ...

(2,15 €) £2.15 exc vat

(2,58 €) £2.58 inc vat

CARB HIF38/44 ABUTMENT BRACKET

CAM4942

Metal bracket that fits between the manifold and the HIF44 (1.75")carb to hold the cable - the choke cable clip for this bracket is CZK6491. Also for HIF38. For HS4 carb see 12G766 bracket. Original Turbo type [...

(11,93 €) £11.93 exc vat

(14,32 €) £14.32 inc vat

T PIECE 5/16"

MTP002

Fuel or water T piece adaptor

used when upgrading fuel system size on specials from 1/4" to 5/16" or any other modifications

(4,28 €) £4.28 exc vat

(5,14 €) £5.14 inc vat

CARB BALANCER TOOL

MSA1003

This tool/gadget allows you to balance both air intakes on either twin SU or twin choke carbs so they flow exactly the same to give better performance and economy.

(28,50 €) £28.50 exc vat

(34,20 €) £34.20 inc vat

CARB HS4 SERVICE KIT SU 1.5"

WZX1852

Carb repair kit less spindle and butterfly for single HS4 carbs-includes float needle valve and jet. Full repair kit with spindle etc is CRK227-----for waxstat type see CRK121, This kit is suitable for pre Waxstat (pre 74) Minis only

(55,31 €) £55.31 exc vat

(66,37 €) £66.37 inc vat

JET BEARING KIT HS4