Front mounted radiators on the twin point use 2 of these on the upper fitting prongs as mounting rubbers. The lower bush is EAP8708

All metal Radiator for all MPI 1996 on to replace the plastic header tank type that fractures and breaks. As available from Rover Xparts these radiators were fitted at the front to help quieten down the engine noise for the last homologation requirem...

This is the larger 5/16" unf that goes though the rear subframe mounting trunnion. Cars manufactured before 1976 require 4 of these, after 1976 require 6. Sold individually.

MPI cast thermostat housing. Useful for any radiator fitted in front of the engine this housing has an outlet pipe for the expansion tank.

The original tooling is no longer available and believed scrapped but this is a very good reproductio...

3 YEAR GUARANTEE-UK made.Large impeller higher capacity water pump with top quality die cast body . Mini Spares procured product as the original superb Rover Airtex tooling has been scrapped.

Fitted with a PPS, glass filled plastic impeller...

Radiator hose kit for all mpi Minis. This kit has top and bottom radiator hoses all in shiney blue Silicone that should last forever and not degrade with heat, time and environment. This kit is ideal for both the racer who never wants a failure or th...

Black Silicon Bottom hose- Unless you're heavily into the concours scene you'll love these hoses! These silicone hoses will withstand higher temps and pressures and will last virtually forever! And if you ever had to replace a lower hose you'll appre...

Heater Matrix take off fixing kit, cars only-fits on heater matrix to take the 2 heater pipes on L/H side of car.

kit includes 2 brass take off pipes with 2 stainless steel bases and 2 water seals.

The outlet pipes are made in brass...

Front mounted radiators use this lower mounting for location and to stop vibration -Fitted to twin point injection cars only

All metal Radiator for all MPI 1996 on to replace the plastic header tank type that fractures and breaks. As available from Rover Xparts these radiators were fitted at the front to help quieten down the engine noise for the last homologation requirem...

Heater hoses and expansion tank hoses are mostly 5/8" from 1985 on so check the bore size as some were actually 1/2" hose with flared ends of 5/8" you will need to use a restrictor pipe MOC210.

Original 5/8" rover hoses were 1"(...

The heater outlets exit on L/H and are horizontal for 5/8"hose fitting.

The outlets for this mod come seperately, as part number JEP10008.