SPINDLE KIT HIF44
WZX1128

(43,59 €) £43.59 exc vat

(52,31 €) £52.31 inc vat

In stockIn stock
spindle threaded both ends for HIF44 for most late carbs--see WZ1127 for spindle with thread one end only as per early metro cars. Thread size is 1/4 BSF

(43,59 €) £43.59 exc vat

(52,31 €) £52.31 inc vat

In stockIn stock

Recommended usage 1 x WZX1128 to fit one mini.
HIF44 Carburettor 44mm 1.75 inch - Qty 1
Carburettor HIF38 and HIF44 - Qty 1

People also bought products
SPINDLE KIT HIF44-EARLY METRO
WZX1127

spindle and fixings only for HIF44, only with one end threaded as opposed to WZX1128 which is threaded both ends-see WZX1183 for disc

(19,61 €) £19.61 exc vat

(23,53 €) £23.53 inc vat
FLOAT NEEDLE/SEAT FOR HIF38/44 LARGER TYPE VALVE
WZX1099A

Fitted to HIF38 and HIF44 carbs, ethanol tolerant product. Bigger bodied valve.

For turbo models see WZX1095 .Quantity required-1

(20,43 €) £20.43 exc vat

(24,52 €) £24.52 inc vat
SPINDLE KIT HS4 1.5"
WZX1177

throttle spindle kit for single HS4 type carbs-.Quantity required-1 kit. -the butterfly is available seperately as WZX1323 for plain-WXZ1325 with air valve

(13,50 €) £13.50 exc vat

(16,20 €) £16.20 inc vat
CARB SPINDLE KIT 1.1/4" HS2
WZX1310

spindle and fixings only for the HS2 carb-the butterfly for this is WZX1320.

sorry folks but buying both kits you get double the gaskets

(11,70 €) £11.70 exc vat

(14,04 €) £14.04 inc vat
HIF44 JET ASSEMBLY
WZX1453A

jet assembly (0.100") for the HIF44 carb only- see MGM10008 for HIF38(0.090")

(25,76 €) £25.76 exc vat

(30,91 €) £30.91 inc vat
FLOAT SPINDLE HIF
CUD2082

spindle to hold the float to the float lid on the bottom of HIF carbs only.

the float is WZX1509A and needle valve is WZX1099A except turbo which is WZX1095

(4,93 €) £4.93 exc vat

(5,92 €) £5.92 inc vat
CARB JET TO FLOAT BOWL SEAL
AUD2194

The metal washer AUD2193 goes up against this seal on the jet where it enters the float bowl on all HS type carbs.

(1,01 €) £1.01 exc vat

(1,21 €) £1.21 inc vat
CARB SPRING (RED 4.5oz) HS TYPE CARBS
AUC4387

Standard spring for all HS2 and HS4 on minis except for the 997/998 Cooper from 1964-9 and H4 special tuning carbs which used AUC4587.

(7,59 €) £7.59 exc vat

(9,11 €) £9.11 inc vat
CHOKE CABLE TRUNNION ACH9042 NIPPLE & 53K3503 SCRE...
AUE34

Complete with screw the choke trunnion is used on nearly all SU carb linkages.

See ACC5062 for carb cable link trunnion also.

(2,03 €) £2.03 exc vat

(2,44 €) £2.44 inc vat
BUTTERFLY SCREW
AUC1358

These screws fit all HS type carb butterflies to hold them on the throttle spindle

(0,90 €) £0.90 exc vat

(1,08 €) £1.08 inc vat
CARBURETTOR LEVER PIN
ACC5062

Pin to hold the accelerator cable which locates in the carb bracket lever. Supplied as originally fitted with washers, nut and split pin plus a proper machined hole for the cable unlike many others on the market- which come either bare or with wrong ...

(2,93 €) £2.93 exc vat

(3,52 €) £3.52 inc vat
FLOAT LID SEAL FOR HIF CARB
AUD3588A

Seal for the HIF38/44 float lid chamber

(1,95 €) £1.95 exc vat

(2,34 €) £2.34 inc vat
CARB HS4 SPINDLE REPAIR BUSH
AUD3080

Worn throttle spindles cause erratic performance from your carb and sometimes the housing gets worn--These are the bushes to repair worn carbs when replacing spindles for HS4 carbs. As a guideline 0.3125" internal diameter ream body to 9...

(3,71 €) £3.71 exc vat

(4,45 €) £4.45 inc vat
CARB GASKET SU FLOAT CHAMBER
AUC8459

Paper gasket for the float bowl of any HS2/HS4/HS6 carbs.

(0,80 €) £0.80 exc vat

(0,96 €) £0.96 inc vat
CARB DASHPOT DAMPER HIF44 MINI COOPER 1990-92
LZX2085

The correct one for the origianl HIF44 carbs fitted to 1990-92 1275cc Coopers

(23,52 €) £23.52 exc vat

(28,22 €) £28.22 inc vat
NEEDLE GUIDE HIF/HS TYPE CARB
JZX1039

Fits all carbs with the swinging type needle.

(5,42 €) £5.42 exc vat

(6,50 €) £6.50 inc vat
HOSE CLIP 8-12MM
GHC108012

Small hose clip for 1/4" fuel line (our part number PETROLPIPE)

(1,16 €) £1.16 exc vat

(1,39 €) £1.39 inc vat
BUTTERFLY / THROTTLE DISC HIF44 EXCEPT TURBO
WZX1414

Throttle disc only for HIF44-non turbo and if replacing the spindle there are 2 type, threaded one end only use WZX1127 for very early carbs 1980-81 only, but all later cars were threaded both ends use WZX1128

(30,09 €) £30.09 exc vat

(36,11 €) £36.11 inc vat
CARB REBUILD KIT FOR HIF44 TURBO CARB
CRK269

complete rebuild kit for Turbo type HIF44 carbs including needle valve and throttle spindle plus disc.With damper clamp ring as fitted to turbo only

(87,11 €) £87.11 exc vat

(104,53 €) £104.53 inc vat
CARB HIF38/44 ABUTMENT BRACKET
CAM4942

Metal bracket that fits between the manifold and the HIF44 (1.75")carb to hold the cable - the choke cable clip for this bracket is CZK6491. Also for HIF38. For HS4 carb see 12G766 bracket. Original Turbo type [...

(11,93 €) £11.93 exc vat

(14,32 €) £14.32 inc vat