SLINGING BRACKET FRONT

Every mini saloon has these,2 of 24A41 on either side front and 24A42 /24A43 sided on the rear --only purpose was for building/moving/ storing and preparation of cars at the factory to sit them on . Also acted as a stiffener...

£7.00 exc vat

£8.40 inc vat

SLINGING BRACKET R/H REAR

24A42

Every mini saloon has these,2 of 24A41 on either side front and 24A42 /24A43 sided on the rear --only purpose was for building/moving/ storing and preparation of cars at the factory to sit them on ..Also acted as a stiffener...

£7.00 exc vat

£8.40 inc vat

GENUINE CROSS MEMBER SQUARE TUNNEL FOR ROD CHANGE ...

CZH2675GENUINE

£65.00 exc vat

£78.00 inc vat

HANDBRAKE MOUNTING REAR BRACKET 1976 ONWARDS

CZH3213

Rear handbrake bracket. 1976 onwards for single cable lever. Welds to tunnel. Not included on CZH2669 floor. For forward bracket see CZH3214.

£10.44 exc vat

£12.53 inc vat

ORIGINAL STYLE METAL FLOOR PLUG (1" FITTING)

14A7081METAL

Metal floor plug as per original with rubber seal.

For use in 1" hole.

£0.99 exc vat

£1.19 inc vat

REAR FLOOR PAN RIGHT HAND NON GEN 1992 ONWARDS

MSL26R

Aftermarket version of the rear R/H floorpan for 1992 on cars.

Appears to be a part section of the genuine whole length floor Right hand side.

This has extra length to go just under x memeber at 37.5"95cm long and under glove compar...

£52.50 exc vat

£63.00 inc vat

REAR FLOOR PAN LEFT HAND NON GEN 1992 ONWARDS

MSL26L

Aftermarket version of the rear L/H floorpan for 1992 on cars with cuved shape for tunnel.

Appears to be a part section of the genuine whole length floor Right hand side.

This has extra length to go just under x memeber at 37.5"95cm...

£52.50 exc vat

£63.00 inc vat

UNDER FLOOR WIRING PIPE CLIP METAL TAG LONG

CW100120

wiring tag 55mm long and 70mm overall.

£1.28 exc vat

£1.54 inc vat

UNDER FLOOR WIRING PIPE CLIP TAG SHORT

CW100110

wiring tag short 25mm and 42mm overall

£1.34 exc vat

£1.61 inc vat

FRONT FLOOR PAN L/H PRESHAPED

MS25L

You can spend hours cutting out rust and patching holes, but why bother? These reproduction floor pans extend the full width with vertical flanges for easy installation and fairly well represent the original stamping. They have added metal to include...

£33.00 exc vat

£39.60 inc vat

FLOOR PAN RODCHANGE

CZH2669

Floor,Front and rear assembly for Rod change gear lever cars 1973 on less the crossmemeber. This floor is the latest shape ever made wich is stronger and has a gusset section down the L/H side to carry extra fuel lines. Also see HMP441004/5 floor sec...

£285.00 exc vat

£342.00 inc vat

CROSS MEMBER SQUARE TUNNEL FOR ROD CHANGE MINIS ON...

CZH2675

The crossmember holds the seat brackets and has the correct shape on the bottom to sit correctly on the floor of the rod change tunnel only. This is the complete section from inner sill one side to the other. Fits all square type rod change gearbox f...

£59.20 exc vat

£71.04 inc vat

FRONT FLOOR PAN R/H PRESHAPED

MS25R

You can spend hours cutting out rust and patching holes, but why bother? These reproduction floor pans extend the full width with vertical flanges for easy installation, and fairly well represent the original stamping. They have added metal to includ...

£33.00 exc vat

£39.60 inc vat

SLINGING BRACKET R/H REAR

24A42

Every mini saloon has these,2 of 24A41 on either side front and 24A42 /24A43 sided on the rear --only purpose was for building/moving/ storing and preparation of cars at the factory to sit them on ..Also acted as a stiffener...

£7.00 exc vat

£8.40 inc vat

SLINGING BRACKET FRONT

24A41

Every mini saloon has these,2 of 24A41 on either side front and 24A42 /24A43 sided on the rear --only purpose was for building/moving/ storing and preparation of cars at the factory to sit them on . Also acted as a stiffener...

£7.00 exc vat

£8.40 inc vat

FOG LAMP BRACKET RHD WAS HAM2292

XFU10002

rear fog lamp bracket which attaches to the rear valance -right hand drive only.

If you have fitted the old type overiders and corner bars for the Retro look you will need to fit a modified bracket MSS024 which is basically the left hand dri...

£4.87 exc vat

£5.84 inc vat

SILL PANEL L/H VAN & ESTATE Mk3 profile 4" wide

14A9027

outer sill panel for van and estate versions L/H from genuine tooling but we consider it a MK3 floor shape pressing

£40.00 exc vat

£48.00 inc vat

SILL PANEL R/H VAN & ESTATE Mk3 profile 4" wide

14A9026

outer sill panel for van and estate versions r/h from genuine tooling but we consider it a MK3 floor shape pressing-6 flute indentations 6 flute indentations

£40.00 exc vat

£48.00 inc vat

BOOT FLOOR PANEL REAR SECTION ONLY ABOUT 10" DEEP

MS54

This 9.5" rear section of the boot (trunk) floor is ideal for collision or rust repair. Many times if you are hit from the rear the floor right in front of the bumper gets damaged-this will fix it. If rust is your problem, then this along with a new ...

£32.00 exc vat

£38.40 inc vat

REAR SEAT PAN REINFORCEMENT STRIP

14A6672

THIS IS THE REINFORCER STRIP THAT WELDS TO THE FRONT EDGE OF THE SEAT BASE TO STOP IT BENDING

£15.00 exc vat

£18.00 inc vat

CROSSMEMBER BRACE BRACKET MK1/2 L/H

MSP005L

Crossmember to inner wing bracket bracket for Mk1/2 L/H

not mini clubman

£25.73 exc vat

£30.88 inc vat

CROSSMEMBER BRACE BRACKET MK1/2 RH

MSP005R

Crossmember to inner wing bracket bracket for Mk1/2 R/H

not mini clubman

£25.73 exc vat

£30.88 inc vat