The lower brightwork moulding for finishing off the lower dash, crash pad rail or on earlier cars the painted metal surface of the panel which holds the switch panel section.See 14A8010 for clip

This moulding was fitted to all m...

Black vinyl dash liners suitable for 2 and 3 clock clubman type dash with the offset clocks (Right Hand Drive).Vinyl will need cutting out for vent holes but the cardboard backing is pre cut

Dash liners without air vents for either side of the speedo on deluxe versions such as the Cooper S with centre speedo and two gauges which are black vinyl covered as opposed to the painted type. Not for the single centre clock only.

see [li...

Pair of black painted type dash cards without airvent holes and for the single speedo only such as van or early saloon. If you have the deluxe type with oil and temp gauge see VGA4192 or in vinyl see ALE2927

Black painted liners for deluxe cars with air vents and central speedo and 2 gauges.

Fresh air vent for the dash, these bolt to the bulkhead and the eyeball socket vents fit into them. These used to be handed but this vent has both hole patterns so will fit both sides. This replaces 37H7035, 37H7036, JJB101000 and JJB101010. Sold ind...

Black vinyl dash liners suitable for 2 and 3 clock clubman type dash with the offset clocks (Left hand Drive).Vinyl will need cutting out for vent holes but the cardboard backing is pre cut.

Alloy dash for cars with 3 clock pod in front of driver and L/H/D--these dashes have a knob on the glovebox.

Printed circuit board for pre 1989 cars with Smith's type 3 clock gauge clusters. These have been unavailable for many years but have now been remade exclusively for Minispares.

Wooden 3 clock dashboard + 3 extra gauge holes cut out, with carbon fibre finish for LHD cars.

Original looking centre speedo dash but only fits later cars with the large padded top facia pad as fitted to cars with the twin or triple clock cluster in front of the driver. This will need air vents as the holes are pre cut for them.