BELT DRIVE KIT NON ADJUSTABLE OLD TYPE CASE

The latest and greatest system to control the camshaft is to eliminate the chain and drive through a belt! No chain to stretch! This has got to be the ultimate in cam timing control! Keeping a camshaft in exact timing is the absolute best way to alw...

£106.38 exc vat

£127.66 inc vat

BELT DRIVE KIT UPRATED ROTOSLIDE ADJUSTMENT

C-AJJ3326RACE

A full kit to convert your timing gears to a belt driven type to restore power loss caused by original timing gear wear and stretching. Also helps reduce noise associated with valve train and dampen out certain harmonic noises generated by the 3 main...

£182.18 exc vat

£218.62 inc vat

BELT DRIVE KIT DOWEL ADJUSTMENT

C-AJJ3328

Dowel type exact timing adjustable toothed belt cam drive system.

This comes as a complete kit to convert from chain drive.

The adjustment is by interelating holes between the cam boss and cam gear. Located by a dowel. The h...

£174.72 exc vat

£209.66 inc vat

BELTDRIVE UPRATED DOWEL ADJUSTMENT

C-AJJ3328RACE

Replacing the original camshaft timing chain with a belt was a giant step forward. Now with improved metallurgy for the gears and use of a plastic housing we have probably reached the ultimate - highest quality with the lowest weight. The adjustable ...

£180.00 exc vat

£216.00 inc vat

BELT DRIVE ROTOSLIDE KIT-original metal cover type

C-AJJ3326

The old style full kit to convert your timing gears to a belt driven type to restore power loss caused by original timing gear wear and stretching. Also helps reduce noise associated with valve train and dampen out certain harmonic noises generated b...

£145.00 exc vat

£174.00 inc vat

ROCKER COVER GROMMET IN SILICONE

12A1358EVO

High quality silicone version of 12A1358. Fits all A series and A+ rocker covers.

£0.83 exc vat

£1.00 inc vat

VICTOR REINZ LARGE BORE HEAD GASKET

GUG702560VR

Victor Reinz large bore head gasket for A-series engines.

£13.50 exc vat

£16.20 inc vat

AC DODD ROAD SPORT CAM

ACD-RS

AC Dodd Road Sport camshaft, ideal for those wanting the most from a tourer cam whilst still have a smooth idle. Please see picture for full cam specs.

Road Sport, For those requiring the maximum from a tourer cam, excellent road m...

£214.40 exc vat

£257.28 inc vat

ACL SMALL BORE ENGINE CAM LINER SET

ACL3046

Replace with new camshaft,it's almost too easy to overlook during a rebuild. Camshaft bearings are pressed into the block and thus are usually done by a machine shop. You would not rebuild an engine without replacing the rod bearings, so why not the ...

£16.14 exc vat

£19.37 inc vat

TIMING COVER AND FRONT PLATE FITTING KIT

MSSK063

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

£8.00 exc vat

£9.60 inc vat

CYLINDER HEAD HEATER TAP FITTING KIT

ADU9102FK

Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket

£1.60 exc vat

£1.92 inc vat

HEAD STUD AND NUT KIT WITH A+ FLANGED NUTS

C-AHT279A

This kit of head studs is the best available for road and lightly tuned engines. See the C-AHT280 set for highly tuned engines.

The material spec is alloy steel heat treated to 75 tensile tons per square foot minimum and finish...

£51.92 exc vat

£62.30 inc vat

MINI 1275 CAM LINER SET

MS3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

£15.75 exc vat

£18.90 inc vat

PISTON RINGS FOR EVOLUTION +60 PISTON

C-STN102-60

Race quality Single piston ring pack for Mini Spares Evolution Pistons which also fits Mega and Omega pistons. This uses 3 piece oil ring 4mm and 2 of 1.2mm compression ring--sold per piston so 4 packs required per engine

£16.00 exc vat

£19.20 inc vat

LOWER POLY STABILISER BUSH KIT

C-STR633

Stabiliser bush kit for lower engine steady

£14.40 exc vat

£17.28 inc vat

CRANK THRUST WASHER SET +0.003" 1275

ACL2136-003

Set of +0.003" size 1275 crank thrust washers.

£11.25 exc vat

£13.50 inc vat

ARP 11 STUD HEAD SET

C-AHT283

ARP Head stud kit that compromises of;

4 x Long Head Studs

7 x Short Head Studs (Disregard 2 if you're using a 9 stud application)

11 x Multipoint ARP nuts

11 x Heavy Duty Washers

4 x Rocker post studs <...

£142.50 exc vat

£171.00 inc vat

MINI SPARES COMBINED BLOCK/GEARBOX GASKET AND SEAL...

AJM100MS

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.

Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

£26.00 exc vat

£31.20 inc vat

SIMPLEX TENSIONER 6 PIECE SPECIAL KIT

MSSK051EVO

Parts required to stop timing chain rattle on A plus engine using special anti stretch single row chain 3H2127EVO.Last chance to buy with the plate and pin to hold the tensioner as they are obsolete from Rover.

Fitted to 998/110...

£35.16 exc vat

£42.19 inc vat

VACUUM UNIT FOR 45/59d up to 1000cc

37H8414MS

For modern day petrol, except 1275cc. See 37H8379MS for 1275cc.

After lengthy tests we have found nearly all vac units are not to the originals but with the change of added oxygenates to petrol in the 1980's and then ethanol in ...

£6.60 exc vat

£7.92 inc vat

SINGLE PISTON RING SET FOR C-STR311 + OMEGAS

C-STN96SINGLE

Single piston ring for 73.5mm Mega and Omega pistons with 1.2mm thick rings and 3 piece oil rings-also for new range of EVO pistons C-STN101

for old 73.5 pistons with 1.5mm top ring try using our C-STN97.

£26.40 exc vat

£31.68 inc vat

1275 +.060 MINI SPARES EVOLUTION LIGHTWEIGHT PISTO...

C-STN100-60

Mini Spares Evolution Lightweight Performance Piston.Single piston and rings.

Press fit only. Same design as C-STN103 range but different manufacturer.

The ultimate in lightweight die cast pistons, available in +.020, +.040 & +.060...

£49.50 exc vat

£59.40 inc vat

1275 +.040 MINI SPARES EVOLUTION LIGHTWEIGHT PISTO...

C-STN100-40

Mini Spares Evolution Lightweight Performance Piston. Single piston and rings.

Press fit only. Same design as C-STN103 range but different manufacturer.

The ultimate in lightweight die cast pistons, available in +.020, +.040 & +.0...

£49.50 exc vat

£59.40 inc vat

MINISPARES OWN TWIN POINT IGNITION LEAD SET

GHT289MS

Set of 4 ignition leads from the original supplier to Unipart, suitable for all twin point minis 1997 onwards. For use with M4 type coil.

£11.25 exc vat

£13.50 inc vat

PRESSURE PLATE SUPERLIGHT RACE ONLY

C-AHT230EVO

Billet steel CNC machined ultralight race backplate for pre verto clutches, weighs just 0.87kg.

£152.25 exc vat

£182.70 inc vat