RAM STAX HS2 LONG
C-AHT246

£55.49 exc vat

£66.59 inc vat

Out of stockOut of stock
2.5" long ram pipe for 1.25" SU.


General:

Velocity stacks, or ram pipes, are necessary on SU carburettors for a variety of reasons. Running an SU devoid of anything to regulate air flow around the carburettor mouth creates a con...

£55.49 exc vat

£66.59 inc vat

Out of stockOut of stock

Recommended products

5/16"unc cap head bolts 7/8"long for attaching the air cleaner alloy elbow to the carb on all HS2/4 and HIF.

The gasket on the air cleaner elbow side of the carb. Bolts between the carb and elbow or directly to pancake filters on the HS2 carb only. See GUG705559GM for HS4 carbs

Alternative products

1.5" long ram pipe for 1.25" SU.


General:

Velocity stacks, or ram pipes, are necessary on SU carburettors for a variety of reasons. Running an SU devoid of anything to regulate air flow around the carburettor mouth creates a co...

People also bought products

The new adjustable height StayUp® Float is resistant to modern ethanol based Fuels and has a military spec closed cell construction making it puncture proof. The ability to adjust the Float Arm allows for quick and easy minor alterations to Float lev...

Small hose clip for 1/4" fuel line (our part number PETROLPIPE)

complete rebuild kit for Turbo type HIF44 carbs including needle valve and throttle spindle plus disc.With damper clamp ring as fitted to turbo only

For 21A2331 pipe. Before the days of Aeroquip, Minis had braided petrol pipes. They should be used in place of rubber for all fuel lines where possible. This is 5/16" bore size for the joining pipe on twin tanks using the original pipe ...

Fuel or water T piece adaptor

used when upgrading fuel system size on specials from 1/4" to 5/16" or any other modifications

This tool/gadget allows you to balance both air intakes on either twin SU or twin choke carbs so they flow exactly the same to give better performance and economy.

Jet bearing kit for HS4 carb for swinging needle type. This includes the adjusting nut, spring etc.

Carb repair kit less spindle and dbutterfly for single HS2 1.25"carbs-includes float needle valve and jet.

spindle and fixings only for the HS2 carb-the butterfly for this is WZX1320.

sorry folks but buying both kits you get double the gaskets

Originally quoted as the HS2 twin carb manifold stud it is one thread longer than CHS2613 which was for single HS2 and spin on oil filter head to the block. UNC course thread for manifold or block and UNF for th...

For HS2 single carbs this is the Complete kit of the parts required for an overhaul kit- if you do not require the spindle and disc and bushes see WZX1851

Twin carb HS2 (1.25")black heatshields with link bar and 3 new return springs.

Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs--NZX for HIF carbs--the earlier H and HS type were fixed soli...

Brighten up your engine bay with these bright alloy carb covers. These fit HS2 1.25" type carbs only- see R22BLUE and R22RED

brighten up your engine bay area with these bright alloy carb covers --these fit HS2 1.25" type carbs only- see R22BLUE and R22 for chrome look

This is the original type of needle valve that governs the plastic fuel float in your SU carb.

An alternative better upgraded version is available as CA90.

This kit for the HS2 type carb includes the fixed needle type bearing jet(sleeve)the adjusting nut,spring and locknut where you adjust your carbs.

.Quantity required for single carb-1 set or for twin carbs 2 sets required

Our heavy duty throttle cable is superior in many ways.

A nylon interior ensures smooth operation. The outer cable is 32mm longer and inner is 95mm longer than the standard one.

Cable to carb bolt is ACC5062.

This needle is richer than used in our stage one kit but is useful when slightly different mods are carried out.