£10.00 exc vat
£12.00 inc vat
In stock
£10.00 exc vat
£12.00 inc vat
In stockRecommended usage 1 x JFF10003 to fit one mini.
Clip on the heater valve for heater cables on vehicles from 1990 where the in line remote heater valve was used. It has also been used as a clip for HIF carbs to hold the cable but the one from Rover is 13H3472.
The single point injected used this very long cable,10" longer than previous
models so if you need an extra long cable this will fit. It's now 42.25". Has the old logo as per CHM373 and a loop on the end to fit later in-line he...
Fitted from approx 1969 to 1988 they replaced the original knob with the word PUSH and HEATER. This was done as a safety feature by having a rubber edge. The grommet in the body for this cable to pass through is CAM5969. Cable length is ...
first used in 1990 but can be used on earlier cables and it shows HOT and COLD
displayed by red and blue arrow heads
The single point injected used this very long cable,10" longer than previous
models so if you need an extra long cable this will fit. It's now 42.25". Has the old logo as per CHM373 and a loop on the end to fit later in-line he...
Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket
Silicone hose kit for 998 vehicles from 1989 onwards that were equipped with the plastic inline heater valve, comes complete with moulded heater take off pipe and 5/8 heater pipe.
Heater hose that comes from the cylinder head take off to the plastic inline heater valve on 998s 1988 on - this can also be used with a heater take off on 1275cc engines.
Heater hose that comes from the cylinder head take off to the plastic inline heater valve on 998s 1988 on - this can also be used with a heater take off on 1275cc engines.
Heater hose that comes from the cylinder head take off to the plastic inline heater valve on 998s 1988 on - this can also be used with a heater take off on 1275cc engines.
The heater is not available anymore, but this matrix is the main component which gets blocked up or leaks, stopping it blowing hot air.
This fits the early Mk1 cars only with 5" gap between pipe hole centres, after 1963 17H8608
Universal aluminium heater assembly complete with heater matrix and electric fan. Comes with 2 outlets for demisting windscreen and 2 variable vents for heating the rest of the car. Ideal for track/race cars or simply for those who want to replace th...
Alloy CNC version of the cylinder head take off 12G2534. The standard item being steel can be prone to corrosion, this CNC alloy version is smart, and will not corrode like steel does
Genuine Mini Spares heater valve. The original RANCO tooling has been scrappped so beware of some imports available where the inners quickly explode loosing the metal cap and all your water when operated.This has M4 metric thread bolt included for th...
Radiator hose kit for all pre 1989 1275GT Clubman Minis where the top hose is slightly longer. This kit has top and bottom radiator hoses and 2 lengths of heater hoses…all in shiney blue Silicone that should last forever and not degrade with heat, ti...
Heater Matrix take off fixing kit, cars only-fits on heater matrix to take the 2 heater pipes on L/H side of car.
kit includes 2 brass take off pipes with 2 stainless steel bases and 2 water seals.
The outlet pipes are made in brass...
5/8" Bore heater hose from heater to bottom hose on 1275cc HIF38 carb cars and SPI or any car where the heater outlets are on the left hand side 1991-1996 only. About 15" long this hose is specially shaped to help fitting but no longer available from...
Heater to in line heater valve -this hose is 8" to short bend-long part is about 14.5" and the short bend is 2.25" long. 25"total length if using GRH905. £26.99 exc vat £32.39 inc vat
Used with BAU5043 heater and 5/8"hose pre1991. This hose fits
2 plastic 5/8" outlets at the same end and close together which exit the heater on the r/h side. The later HIF38 1275 and single point cars had a change point where the plastic outlets exited on the l/h. This is a JEF10005.
These units take ...
